linux/include/asm-generic, branch v3.2.41

mm: limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPT

2013-01-16T01:13:20Z

commit 53a59fc67f97374758e63a9c785891ec62324c81 upstream. Since commit e303297e6c3a ("mm: extended batches for generic mmu_gather") we are batching pages to be freed until either tlb_next_batch cannot allocate a new batch or we are done. This works just fine most of the time but we can get in troubles with non-preemptible kernel (CONFIG_PREEMPT_NONE or CONFIG_PREEMPT_VOLUNTARY) on large machines where too aggressive batching might lead to soft lockups during process exit path (exit_mmap) because there are no scheduling points down the free_pages_and_swap_cache path and so the freeing can take long enough to trigger the soft lockup. The lockup is harmless except when the system is setup to panic on softlockup which is not that unusual. The simplest way to work around this issue is to limit the maximum number of batches in a single mmu_gather. 10k of collected pages should be safe to prevent from soft lockups (we would have 2ms for one) even if they are all freed without an explicit scheduling point. This patch doesn't add any new explicit scheduling points because it relies on zap_pmd_range during page tables zapping which calls cond_resched per PMD. The following lockup has been reported for 3.0 kernel with a huge process (in order of hundreds gigs but I do know any more details). BUG: soft lockup - CPU#56 stuck for 22s! [kernel:31053] Modules linked in: af_packet nfs lockd fscache auth_rpcgss nfs_acl sunrpc mptctl mptbase autofs4 binfmt_misc dm_round_robin dm_multipath bonding cpufreq_conservative cpufreq_userspace cpufreq_powersave pcc_cpufreq mperf microcode fuse loop osst sg sd_mod crc_t10dif st qla2xxx scsi_transport_fc scsi_tgt netxen_nic i7core_edac iTCO_wdt joydev e1000e serio_raw pcspkr edac_core iTCO_vendor_support acpi_power_meter rtc_cmos hpwdt hpilo button container usbhid hid dm_mirror dm_region_hash dm_log linear uhci_hcd ehci_hcd usbcore usb_common scsi_dh_emc scsi_dh_alua scsi_dh_hp_sw scsi_dh_rdac scsi_dh dm_snapshot pcnet32 mii edd dm_mod raid1 ext3 mbcache jbd fan thermal processor thermal_sys hwmon cciss scsi_mod Supported: Yes CPU 56 Pid: 31053, comm: kernel Not tainted 3.0.31-0.9-default #1 HP ProLiant DL580 G7 RIP: 0010: _raw_spin_unlock_irqrestore+0x8/0x10 RSP: 0018:ffff883ec1037af0 EFLAGS: 00000206 RAX: 0000000000000e00 RBX: ffffea01a0817e28 RCX: ffff88803ffd9e80 RDX: 0000000000000200 RSI: 0000000000000206 RDI: 0000000000000206 RBP: 0000000000000002 R08: 0000000000000001 R09: ffff887ec724a400 R10: 0000000000000000 R11: dead000000200200 R12: ffffffff8144c26e R13: 0000000000000030 R14: 0000000000000297 R15: 000000000000000e FS: 00007ed834282700(0000) GS:ffff88c03f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000068b240 CR3: 0000003ec13c5000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kernel (pid: 31053, threadinfo ffff883ec1036000, task ffff883ebd5d4100) Call Trace: release_pages+0xc5/0x260 free_pages_and_swap_cache+0x9d/0xc0 tlb_flush_mmu+0x5c/0x80 tlb_finish_mmu+0xe/0x50 exit_mmap+0xbd/0x120 mmput+0x49/0x120 exit_mm+0x122/0x160 do_exit+0x17a/0x430 do_group_exit+0x3d/0xb0 get_signal_to_deliver+0x247/0x480 do_signal+0x71/0x1b0 do_notify_resume+0x98/0xb0 int_signal+0x12/0x17 DWARF2 unwinder stuck at int_signal+0x12/0x17 Signed-off-by: Michal Hocko Cc: Mel Gorman Cc: Rik van Riel Cc: Peter Zijlstra Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Ben Hutchings

mutex: Place lock in contended state after fastpath_lock failure

2012-09-12T02:36:59Z

commit 0bce9c46bf3b15f485d82d7e81dabed6ebcc24b1 upstream. ARM recently moved to asm-generic/mutex-xchg.h for its mutex implementation after the previous implementation was found to be missing some crucial memory barriers. However, this has revealed some problems running hackbench on SMP platforms due to the way in which the MUTEX_SPIN_ON_OWNER code operates. The symptoms are that a bunch of hackbench tasks are left waiting on an unlocked mutex and therefore never get woken up to claim it. This boils down to the following sequence of events: Task A Task B Task C Lock value 0 1 1 lock() 0 2 lock() 0 3 spin(A) 0 4 unlock() 1 5 lock() 0 6 cmpxchg(1,0) 0 7 contended() -1 8 lock() 0 9 spin(C) 0 10 unlock() 1 11 cmpxchg(1,0) 0 12 unlock() 1 At this point, the lock is unlocked, but Task B is in an uninterruptible sleep with nobody to wake it up. This patch fixes the problem by ensuring we put the lock into the contended state if we fail to acquire it on the fastpath, ensuring that any blocked waiters are woken up when the mutex is released. Signed-off-by: Will Deacon Cc: Arnd Bergmann Cc: Chris Mason Cc: Ingo Molnar Reviewed-by: Nicolas Pitre Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/n/tip-6e9lrw2avczr0617fzl5vqb8@git.kernel.org Signed-off-by: Thomas Gleixner Signed-off-by: Ben Hutchings

thp: avoid atomic64_read in pmd_read_atomic for 32bit PAE

2012-07-04T04:44:09Z

commit e4eed03fd06578571c01d4f1478c874bb432c815 upstream. In the x86 32bit PAE CONFIG_TRANSPARENT_HUGEPAGE=y case while holding the mmap_sem for reading, cmpxchg8b cannot be used to read pmd contents under Xen. So instead of dealing only with "consistent" pmdvals in pmd_none_or_trans_huge_or_clear_bad() (which would be conceptually simpler) we let pmd_none_or_trans_huge_or_clear_bad() deal with pmdvals where the low 32bit and high 32bit could be inconsistent (to avoid having to use cmpxchg8b). The only guarantee we get from pmd_read_atomic is that if the low part of the pmd was found null, the high part will be null too (so the pmd will be considered unstable). And if the low part of the pmd is found "stable" later, then it means the whole pmd was read atomically (because after a pmd is stable, neither MADV_DONTNEED nor page faults can alter it anymore, and we read the high part after the low part). In the 32bit PAE x86 case, it is enough to read the low part of the pmdval atomically to declare the pmd as "stable" and that's true for THP and no THP, furthermore in the THP case we also have a barrier() that will prevent any inconsistent pmdvals to be cached by a later re-read of the *pmd. Signed-off-by: Andrea Arcangeli Cc: Jonathan Nieder Cc: Ulrich Obergfell Cc: Mel Gorman Cc: Hugh Dickins Cc: Larry Woodman Cc: Petr Matousek Cc: Rik van Riel Cc: Jan Beulich Cc: KOSAKI Motohiro Tested-by: Andrew Jones Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Ben Hutchings

mm: pmd_read_atomic: fix 32bit PAE pmd walk vs pmd_populate SMP race condition

2012-07-04T04:44:09Z

commit 26c191788f18129af0eb32a358cdaea0c7479626 upstream. When holding the mmap_sem for reading, pmd_offset_map_lock should only run on a pmd_t that has been read atomically from the pmdp pointer, otherwise we may read only half of it leading to this crash. PID: 11679 TASK: f06e8000 CPU: 3 COMMAND: "do_race_2_panic" #0 [f06a9dd8] crash_kexec at c049b5ec #1 [f06a9e2c] oops_end at c083d1c2 #2 [f06a9e40] no_context at c0433ded #3 [f06a9e64] bad_area_nosemaphore at c043401a #4 [f06a9e6c] __do_page_fault at c0434493 #5 [f06a9eec] do_page_fault at c083eb45 #6 [f06a9f04] error_code (via page_fault) at c083c5d5 EAX: 01fb470c EBX: fff35000 ECX: 00000003 EDX: 00000100 EBP: 00000000 DS: 007b ESI: 9e201000 ES: 007b EDI: 01fb4700 GS: 00e0 CS: 0060 EIP: c083bc14 ERR: ffffffff EFLAGS: 00010246 #7 [f06a9f38] _spin_lock at c083bc14 #8 [f06a9f44] sys_mincore at c0507b7d #9 [f06a9fb0] system_call at c083becd start len EAX: ffffffda EBX: 9e200000 ECX: 00001000 EDX: 6228537f DS: 007b ESI: 00000000 ES: 007b EDI: 003d0f00 SS: 007b ESP: 62285354 EBP: 62285388 GS: 0033 CS: 0073 EIP: 00291416 ERR: 000000da EFLAGS: 00000286 This should be a longstanding bug affecting x86 32bit PAE without THP. Only archs with 64bit large pmd_t and 32bit unsigned long should be affected. With THP enabled the barrier() in pmd_none_or_trans_huge_or_clear_bad() would partly hide the bug when the pmd transition from none to stable, by forcing a re-read of the *pmd in pmd_offset_map_lock, but when THP is enabled a new set of problem arises by the fact could then transition freely in any of the none, pmd_trans_huge or pmd_trans_stable states. So making the barrier in pmd_none_or_trans_huge_or_clear_bad() unconditional isn't good idea and it would be a flakey solution. This should be fully fixed by introducing a pmd_read_atomic that reads the pmd in order with THP disabled, or by reading the pmd atomically with cmpxchg8b with THP enabled. Luckily this new race condition only triggers in the places that must already be covered by pmd_none_or_trans_huge_or_clear_bad() so the fix is localized there but this bug is not related to THP. NOTE: this can trigger on x86 32bit systems with PAE enabled with more than 4G of ram, otherwise the high part of the pmd will never risk to be truncated because it would be zero at all times, in turn so hiding the SMP race. This bug was discovered and fully debugged by Ulrich, quote: ---- [..] pmd_none_or_trans_huge_or_clear_bad() loads the content of edx and eax. 496 static inline int pmd_none_or_trans_huge_or_clear_bad(pmd_t *pmd) 497 { 498 /* depend on compiler for an atomic pmd read */ 499 pmd_t pmdval = *pmd; // edi = pmd pointer 0xc0507a74 : mov 0x8(%esp),%edi ... // edx = PTE page table high address 0xc0507a84 : mov 0x4(%edi),%edx ... // eax = PTE page table low address 0xc0507a8e : mov (%edi),%eax [..] Please note that the PMD is not read atomically. These are two "mov" instructions where the high order bits of the PMD entry are fetched first. Hence, the above machine code is prone to the following race. - The PMD entry {high|low} is 0x0000000000000000. The "mov" at 0xc0507a84 loads 0x00000000 into edx. - A page fault (on another CPU) sneaks in between the two "mov" instructions and instantiates the PMD. - The PMD entry {high|low} is now 0x00000003fda38067. The "mov" at 0xc0507a8e loads 0xfda38067 into eax. ---- Reported-by: Ulrich Obergfell Signed-off-by: Andrea Arcangeli Cc: Mel Gorman Cc: Hugh Dickins Cc: Larry Woodman Cc: Petr Matousek Cc: Rik van Riel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Ben Hutchings

asm-generic: Use __BITS_PER_LONG in statfs.h

2012-05-11T12:14:57Z

commit f5c2347ee20a8d6964d6a6b1ad04f200f8d4dfa7 upstream. is exported to userspace, so using BITS_PER_LONG is invalid. We need to use __BITS_PER_LONG instead. This is kernel bugzilla 43165. Reported-by: H.J. Lu Signed-off-by: H. Peter Anvin Link: http://lkml.kernel.org/r/1335465916-16965-1-git-send-email-hpa@linux.intel.com Acked-by: Arnd Bergmann Signed-off-by: Ben Hutchings

compat: use sys_sendfile64() implementation for sendfile syscall

2012-04-02T16:53:09Z

commit 1631fcea8399da5e80a80084b3b8c5bfd99d21e7 upstream. was set up to use sys_sendfile() for the 32-bit compat API instead of sys_sendfile64(), but in fact the right thing to do is to use sys_sendfile64() in all cases. The 32-bit sendfile64() API in glibc uses the sendfile64 syscall, so it has to be capable of doing full 64-bit operations. But the sys_sendfile() kernel implementation has a MAX_NON_LFS test in it which explicitly limits the offset to 2^32. So, we need to use the sys_sendfile64() implementation in the kernel for this case. Acked-by: Arnd Bergmann Signed-off-by: Chris Metcalf Signed-off-by: Greg Kroah-Hartman

mm: thp: fix pmd_bad() triggering in code paths holding mmap_sem read mode

2012-04-02T16:52:37Z

commit 1a5a9906d4e8d1976b701f889d8f35d54b928f25 upstream. In some cases it may happen that pmd_none_or_clear_bad() is called with the mmap_sem hold in read mode. In those cases the huge page faults can allocate hugepmds under pmd_none_or_clear_bad() and that can trigger a false positive from pmd_bad() that will not like to see a pmd materializing as trans huge. It's not khugepaged causing the problem, khugepaged holds the mmap_sem in write mode (and all those sites must hold the mmap_sem in read mode to prevent pagetables to go away from under them, during code review it seems vm86 mode on 32bit kernels requires that too unless it's restricted to 1 thread per process or UP builds). The race is only with the huge pagefaults that can convert a pmd_none() into a pmd_trans_huge(). Effectively all these pmd_none_or_clear_bad() sites running with mmap_sem in read mode are somewhat speculative with the page faults, and the result is always undefined when they run simultaneously. This is probably why it wasn't common to run into this. For example if the madvise(MADV_DONTNEED) runs zap_page_range() shortly before the page fault, the hugepage will not be zapped, if the page fault runs first it will be zapped. Altering pmd_bad() not to error out if it finds hugepmds won't be enough to fix this, because zap_pmd_range would then proceed to call zap_pte_range (which would be incorrect if the pmd become a pmd_trans_huge()). The simplest way to fix this is to read the pmd in the local stack (regardless of what we read, no need of actual CPU barriers, only compiler barrier needed), and be sure it is not changing under the code that computes its value. Even if the real pmd is changing under the value we hold on the stack, we don't care. If we actually end up in zap_pte_range it means the pmd was not none already and it was not huge, and it can't become huge from under us (khugepaged locking explained above). All we need is to enforce that there is no way anymore that in a code path like below, pmd_trans_huge can be false, but pmd_none_or_clear_bad can run into a hugepmd. The overhead of a barrier() is just a compiler tweak and should not be measurable (I only added it for THP builds). I don't exclude different compiler versions may have prevented the race too by caching the value of *pmd on the stack (that hasn't been verified, but it wouldn't be impossible considering pmd_none_or_clear_bad, pmd_bad, pmd_trans_huge, pmd_none are all inlines and there's no external function called in between pmd_trans_huge and pmd_none_or_clear_bad). if (pmd_trans_huge(*pmd)) { if (next-addr != HPAGE_PMD_SIZE) { VM_BUG_ON(!rwsem_is_locked(&tlb->mm->mmap_sem)); split_huge_page_pmd(vma->vm_mm, pmd); } else if (zap_huge_pmd(tlb, vma, pmd, addr)) continue; /* fall through */ } if (pmd_none_or_clear_bad(pmd)) Because this race condition could be exercised without special privileges this was reported in CVE-2012-1179. The race was identified and fully explained by Ulrich who debugged it. I'm quoting his accurate explanation below, for reference. ====== start quote ======= mapcount 0 page_mapcount 1 kernel BUG at mm/huge_memory.c:1384! At some point prior to the panic, a "bad pmd ..." message similar to the following is logged on the console: mm/memory.c:145: bad pmd ffff8800376e1f98(80000000314000e7). The "bad pmd ..." message is logged by pmd_clear_bad() before it clears the page's PMD table entry. 143 void pmd_clear_bad(pmd_t *pmd) 144 { -> 145 pmd_ERROR(*pmd); 146 pmd_clear(pmd); 147 } After the PMD table entry has been cleared, there is an inconsistency between the actual number of PMD table entries that are mapping the page and the page's map count (_mapcount field in struct page). When the page is subsequently reclaimed, __split_huge_page() detects this inconsistency. 1381 if (mapcount != page_mapcount(page)) 1382 printk(KERN_ERR "mapcount %d page_mapcount %d\n", 1383 mapcount, page_mapcount(page)); -> 1384 BUG_ON(mapcount != page_mapcount(page)); The root cause of the problem is a race of two threads in a multithreaded process. Thread B incurs a page fault on a virtual address that has never been accessed (PMD entry is zero) while Thread A is executing an madvise() system call on a virtual address within the same 2 MB (huge page) range. virtual address space .---------------------. | | | | .-|---------------------| | | | | | |<-- B(fault) | | | 2 MB | |/////////////////////|-. huge < |/////////////////////| > A(range) page | |/////////////////////|-' | | | | | | '-|---------------------| | | | | '---------------------' - Thread A is executing an madvise(..., MADV_DONTNEED) system call on the virtual address range "A(range)" shown in the picture. sys_madvise // Acquire the semaphore in shared mode. down_read(¤t->mm->mmap_sem) ... madvise_vma switch (behavior) case MADV_DONTNEED: madvise_dontneed zap_page_range unmap_vmas unmap_page_range zap_pud_range zap_pmd_range // // Assume that this huge page has never been accessed. // I.e. content of the PMD entry is zero (not mapped). // if (pmd_trans_huge(*pmd)) { // We don't get here due to the above assumption. } // // Assume that Thread B incurred a page fault and .---------> // sneaks in here as shown below. | // | if (pmd_none_or_clear_bad(pmd)) | { | if (unlikely(pmd_bad(*pmd))) | pmd_clear_bad | { | pmd_ERROR | // Log "bad pmd ..." message here. | pmd_clear | // Clear the page's PMD entry. | // Thread B incremented the map count | // in page_add_new_anon_rmap(), but | // now the page is no longer mapped | // by a PMD entry (-> inconsistency). | } | } | v - Thread B is handling a page fault on virtual address "B(fault)" shown in the picture. ... do_page_fault __do_page_fault // Acquire the semaphore in shared mode. down_read_trylock(&mm->mmap_sem) ... handle_mm_fault if (pmd_none(*pmd) && transparent_hugepage_enabled(vma)) // We get here due to the above assumption (PMD entry is zero). do_huge_pmd_anonymous_page alloc_hugepage_vma // Allocate a new transparent huge page here. ... __do_huge_pmd_anonymous_page ... spin_lock(&mm->page_table_lock) ... page_add_new_anon_rmap // Here we increment the page's map count (starts at -1). atomic_set(&page->_mapcount, 0) set_pmd_at // Here we set the page's PMD entry which will be cleared // when Thread A calls pmd_clear_bad(). ... spin_unlock(&mm->page_table_lock) The mmap_sem does not prevent the race because both threads are acquiring it in shared mode (down_read). Thread B holds the page_table_lock while the page's map count and PMD table entry are updated. However, Thread A does not synchronize on that lock. ====== end quote ======= [akpm@linux-foundation.org: checkpatch fixes] Reported-by: Ulrich Obergfell Signed-off-by: Andrea Arcangeli Acked-by: Johannes Weiner Cc: Mel Gorman Cc: Hugh Dickins Cc: Dave Jones Acked-by: Larry Woodman Acked-by: Rik van Riel Cc: Mark Salter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

epoll: introduce POLLFREE to flush ->signalfd_wqh before kfree()

2012-03-01T00:31:23Z

commit d80e731ecab420ddcb79ee9d0ac427acbc187b4b upstream. This patch is intentionally incomplete to simplify the review. It ignores ep_unregister_pollwait() which plays with the same wqh. See the next change. epoll assumes that the EPOLL_CTL_ADD'ed file controls everything f_op->poll() needs. In particular it assumes that the wait queue can't go away until eventpoll_release(). This is not true in case of signalfd, the task which does EPOLL_CTL_ADD uses its ->sighand which is not connected to the file. This patch adds the special event, POLLFREE, currently only for epoll. It expects that init_poll_funcptr()'ed hook should do the necessary cleanup. Perhaps it should be defined as EPOLLFREE in eventpoll. __cleanup_sighand() is changed to do wake_up_poll(POLLFREE) if ->signalfd_wqh is not empty, we add the new signalfd_cleanup() helper. ep_poll_callback(POLLFREE) simply does list_del_init(task_list). This make this poll entry inconsistent, but we don't care. If you share epoll fd which contains our sigfd with another process you should blame yourself. signalfd is "really special". I simply do not know how we can define the "right" semantics if it used with epoll. The main problem is, epoll calls signalfd_poll() once to establish the connection with the wait queue, after that signalfd_poll(NULL) returns the different/inconsistent results depending on who does EPOLL_CTL_MOD/signalfd_read/etc. IOW: apart from sigmask, signalfd has nothing to do with the file, it works with the current thread. In short: this patch is the hack which tries to fix the symptoms. It also assumes that nobody can take tasklist_lock under epoll locks, this seems to be true. Note: - we do not have wake_up_all_poll() but wake_up_poll() is fine, poll/epoll doesn't use WQ_FLAG_EXCLUSIVE. - signalfd_cleanup() uses POLLHUP along with POLLFREE, we need a couple of simple changes in eventpoll.c to make sure it can't be "lost". Reported-by: Maxime Bizon Signed-off-by: Oleg Nesterov Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

procfs: do not confuse jiffies with cputime64_t

2011-12-30T00:31:57Z

Commit 2a95ea6c0d129b4 ("procfs: do not overflow get_{idle,iowait}_time for nohz") did not take into account that one some architectures jiffies and cputime use different units. This causes get_idle_time() to return numbers in the wrong units, making the idle time fields in /proc/stat wrong. Instead of converting the usec value returned by get_cpu_{idle,iowait}_time_us to units of jiffies, use the new function usecs_to_cputime64 to convert it to the correct unit of cputime64_t. Signed-off-by: Andreas Schwab Acked-by: Michal Hocko Cc: Arnd Bergmann Cc: "Artem S. Tashkinov" Cc: Dave Jones Cc: Alexey Dobriyan Cc: Thomas Gleixner Cc: "Luck, Tony" Cc: Benjamin Herrenschmidt Cc: Martin Schwidefsky Cc: Heiko Carstens Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

asm-generic/unistd.h: support new process_vm_{readv,write} syscalls

2011-12-03T20:31:48Z

Also prototype the "compat" functions so they can be referenced from C code. Signed-off-by: Chris Metcalf Acked-by: Arnd Bergmann