linux/fs, branch v3.10.28

nilfs2: fix segctor bug that causes file system corruption

2014-01-25T16:27:12Z

commit 70f2fe3a26248724d8a5019681a869abdaf3e89a upstream. There is a bug in the function nilfs_segctor_collect, which results in active data being written to a segment, that is marked as clean. It is possible, that this segment is selected for a later segment construction, whereby the old data is overwritten. The problem shows itself with the following kernel log message: nilfs_sufile_do_cancel_free: segment 6533 must be clean Usually a few hours later the file system gets corrupted: NILFS: bad btree node (blocknr=8748107): level = 0, flags = 0x0, nchildren = 0 NILFS error (device sdc1): nilfs_bmap_last_key: broken bmap (inode number=114660) The issue can be reproduced with a file system that is nearly full and with the cleaner running, while some IO intensive task is running. Although it is quite hard to reproduce. This is what happens: 1. The cleaner starts the segment construction 2. nilfs_segctor_collect is called 3. sc_stage is on NILFS_ST_SUFILE and segments are freed 4. sc_stage is on NILFS_ST_DAT current segment is full 5. nilfs_segctor_extend_segments is called, which allocates a new segment 6. The new segment is one of the segments freed in step 3 7. nilfs_sufile_cancel_freev is called and produces an error message 8. Loop around and the collection starts again 9. sc_stage is on NILFS_ST_SUFILE and segments are freed including the newly allocated segment, which will contain active data and can be allocated at a later time 10. A few hours later another segment construction allocates the segment and causes file system corruption This can be prevented by simply reordering the statements. If nilfs_sufile_cancel_freev is called before nilfs_segctor_extend_segments the freed segments are marked as dirty and cannot be allocated any more. Signed-off-by: Andreas Rohner Reviewed-by: Ryusuke Konishi Tested-by: Andreas Rohner Signed-off-by: Ryusuke Konishi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

writeback: Fix data corruption on NFS

2014-01-25T16:27:11Z

commit f9b0e058cbd04ada76b13afffa7e1df830543c24 upstream. Commit 4f8ad655dbc8 "writeback: Refactor writeback_single_inode()" added a condition to skip clean inode. However this is wrong in WB_SYNC_ALL mode because there we also want to wait for outstanding writeback on possibly clean inode. This was causing occasional data corruption issues on NFS because it uses sync_inode() to make sure all outstanding writes are flushed to the server before truncating the inode and with sync_inode() returning prematurely file was sometimes extended back by an outstanding write after it was truncated. So modify the test to also check for pages under writeback in WB_SYNC_ALL mode. Fixes: 4f8ad655dbc82cf05d2edc11e66b78a42d38bf93 Reported-and-tested-by: Dan Duval Signed-off-by: Jan Kara Signed-off-by: Greg Kroah-Hartman

vfs: In d_path don't call d_dname on a mount point

2014-01-25T16:27:11Z

commit f48cfddc6729ef133933062320039808bafa6f45 upstream. Aditya Kali (adityakali@google.com) wrote: > Commit bf056bfa80596a5d14b26b17276a56a0dcb080e5: > "proc: Fix the namespace inode permission checks." converted > the namespace files into symlinks. The same commit changed > the way namespace bind mounts appear in /proc/mounts: > $ mount --bind /proc/self/ns/ipc /mnt/ipc > Originally: > $ cat /proc/mounts | grep ipc > proc /mnt/ipc proc rw,nosuid,nodev,noexec 0 0 > > After commit bf056bfa80596a5d14b26b17276a56a0dcb080e5: > $ cat /proc/mounts | grep ipc > proc ipc:[4026531839] proc rw,nosuid,nodev,noexec 0 0 > > This breaks userspace which expects the 2nd field in > /proc/mounts to be a valid path. The symlink /proc//ns/{ipc,mnt,net,pid,user,uts} point to dentries allocated with d_alloc_pseudo that we can mount, and that have interesting names printed out with d_dname. When these files are bind mounted /proc/mounts is not currently displaying the mount point correctly because d_dname is called instead of just displaying the path where the file is mounted. Solve this by adding an explicit check to distinguish mounted pseudo inodes and unmounted pseudo inodes. Unmounted pseudo inodes always use mount of their filesstem as the mnt_root in their path making these two cases easy to distinguish. Acked-by: Serge Hallyn Reported-by: Aditya Kali Signed-off-by: "Eric W. Biederman" Signed-off-by: Greg Kroah-Hartman

GFS2: Increase i_writecount during gfs2_setattr_chown

2014-01-25T16:27:11Z

commit 62e96cf81988101fe9e086b2877307b6adda5197 upstream. This patch calls get_write_access in function gfs2_setattr_chown, which merely increases inode->i_writecount for the duration of the function. That will ensure that any file closes won't delete the inode's multi-block reservation while the function is running. It also ensures that a multi-block reservation exists when needed for quota change operations during the chown. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse Signed-off-by: Greg Kroah-Hartman

ext4: fix bigalloc regression

2014-01-09T20:24:27Z

commit d0abafac8c9162f39c4f6b2f8141b772a09b3770 upstream. Commit f5a44db5d2 introduced a regression on filesystems created with the bigalloc feature (cluster size > blocksize). It causes xfstests generic/006 and /013 to fail with an unexpected JBD2 failure and transaction abort that leaves the test file system in a read only state. Other xfstests run on bigalloc file systems are likely to fail as well. The cause is the accidental use of a cluster mask where a cluster offset was needed in ext4_ext_map_blocks(). Signed-off-by: Eric Whitney Cc: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman

ceph: allow sync_read/write return partial successed size of read/write.

2014-01-09T20:24:25Z

commit ee7289bfadda5f4ef60884547ebc9989c8fb314a upstream. For sync_read/write, it may do multi stripe operations.If one of those met erro, we return the former successed size rather than a error value. There is a exception for write-operation met -EOLDSNAPC.If this occur,we retry the whole write again. Signed-off-by: Jianpeng Ma Signed-off-by: Greg Kroah-Hartman

ceph: fix bugs about handling short-read for sync read mode.

2014-01-09T20:24:25Z

commit 02ae66d8b229708fd94b764f6c17ead1c7741fcf upstream. cephfs . show_layout >layyout.data_pool: 0 >layout.object_size: 4194304 >layout.stripe_unit: 4194304 >layout.stripe_count: 1 TestA: >dd if=/dev/urandom of=test bs=1M count=2 oflag=direct >dd if=/dev/urandom of=test bs=1M count=2 seek=4 oflag=direct >dd if=test of=/dev/null bs=6M count=1 iflag=direct The messages from func striped_read are: ceph: file.c:350 : striped_read 0~6291456 (read 0) got 2097152 HITSTRIPE SHORT ceph: file.c:350 : striped_read 2097152~4194304 (read 2097152) got 0 HITSTRIPE SHORT ceph: file.c:381 : zero tail 4194304 ceph: file.c:390 : striped_read returns 6291456 The hole of file is from 2M--4M.But actualy it zero the last 4M include the last 2M area which isn't a hole. Using this patch, the messages are: ceph: file.c:350 : striped_read 0~6291456 (read 0) got 2097152 HITSTRIPE SHORT ceph: file.c:358 : zero gap 2097152 to 4194304 ceph: file.c:350 : striped_read 4194304~2097152 (read 4194304) got 2097152 ceph: file.c:384 : striped_read returns 6291456 TestB: >echo majianpeng > test >dd if=test of=/dev/null bs=2M count=1 iflag=direct The messages are: ceph: file.c:350 : striped_read 0~6291456 (read 0) got 11 HITSTRIPE SHORT ceph: file.c:350 : striped_read 11~6291445 (read 11) got 0 HITSTRIPE SHORT ceph: file.c:390 : striped_read returns 11 For this case,it did once more striped_read.It's no meaningless. Using this patch, the message are: ceph: file.c:350 : striped_read 0~6291456 (read 0) got 11 HITSTRIPE SHORT ceph: file.c:384 : striped_read returns 11 Big thanks to Yan Zheng for the patch. Reviewed-by: Yan, Zheng Signed-off-by: Jianpeng Ma Signed-off-by: Greg Kroah-Hartman

ceph: Add check returned value on func ceph_calc_ceph_pg.

2014-01-09T20:24:25Z

commit 2fbcbff1d6b9243ef71c64a8ab993bc3c7bb7af1 upstream. Func ceph_calc_ceph_pg maybe failed.So add check for returned value. Signed-off-by: Jianpeng Ma Reviewed-by: Sage Weil Signed-off-by: Sage Weil Signed-off-by: Greg Kroah-Hartman

ceph: cleanup types in striped_read()

2014-01-09T20:24:25Z

commit 688bac461ba3e9d221a879ab40b687f5d7b5b19c upstream. We pass in a u64 value for "len" and then immediately truncate away the upper 32 bits. Signed-off-by: Dan Carpenter Reviewed-by: Sage Weil Reviewed-by: Alex Elder Signed-off-by: Greg Kroah-Hartman

ceph: fix null pointer dereference

2014-01-09T20:24:25Z

commit c338c07c51e3106711fad5eb599e375eadb6855d upstream. When register_session() is given an out-of-range argument for mds, ceph_mdsmap_get_addr() will return a null pointer, which would be given to ceph_con_open() & be dereferenced, causing a kernel oops. This fixes bug #4685 in the Ceph bug tracker . Signed-off-by: Nathaniel Yazdani Reviewed-by: Sage Weil Signed-off-by: Greg Kroah-Hartman