linux/fs/libfs.c, branch v2.6.35.9

wrong type for 'magic' argument in simple_fill_super()

2010-06-04T21:16:28Z

It's used to superblock ->s_magic, which is unsigned long. Signed-off-by: Roberto Sassu Reviewed-by: Mimi Zohar Signed-off-by: Eric Paris CC: stable@kernel.org Signed-off-by: Al Viro

fs: introduce new truncate sequence

2010-05-28T02:15:33Z

Introduce a new truncate calling sequence into fs/mm subsystems. Rather than setattr > vmtruncate > truncate, have filesystems call their truncate sequence from ->setattr if filesystem specific operations are required. vmtruncate is deprecated, and truncate_pagecache and inode_newsize_ok helpers introduced previously should be used. simple_setattr is introduced for simple in-ram filesystems to implement the new truncate sequence. Eventually all filesystems should be converted to implement a setattr, and the default code in notify_change should go away. simple_setsize is also introduced to perform just the ATTR_SIZE portion of simple_setattr (ie. changing i_size and trimming pagecache). To implement the new truncate sequence: - filesystem specific manipulations (eg freeing blocks) must be done in the setattr method rather than ->truncate. - vmtruncate can not be used by core code to trim blocks past i_size in the event of write failure after allocation, so this must be performed in the fs code. - convert usage of helpers block_write_begin, nobh_write_begin, cont_write_begin, and *blockdev_direct_IO* to use _newtrunc postfixed variants. These avoid calling vmtruncate to trim blocks (see previous). - inode_setattr should not be used. generic_setattr is a new function to be used to copy simple attributes into the generic inode. - make use of the better opportunity to handle errors with the new sequence. Big problem with the previous calling sequence: the filesystem is not called until i_size has already changed. This means it is not allowed to fail the call, and also it does not know what the previous i_size was. Also, generic code calling vmtruncate to truncate allocated blocks in case of error had no good way to return a meaningful error (or, for example, atomically handle block deallocation). Cc: Christoph Hellwig Acked-by: Jan Kara Signed-off-by: Nick Piggin Signed-off-by: Al Viro

rename the generic fsync implementations

2010-05-28T02:06:06Z

We don't name our generic fsync implementations very well currently. The no-op implementation for in-memory filesystems currently is called simple_sync_file which doesn't make too much sense to start with, the the generic one for simple filesystems is called simple_fsync which can lead to some confusion. This patch renames the generic file fsync method to generic_file_fsync to match the other generic_file_* routines it is supposed to be used with, and the no-op implementation to noop_fsync to make it obvious what to expect. In addition add some documentation for both methods. Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro

drop unused dentry argument to ->fsync

2010-05-28T02:05:02Z

Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro

FS / libfs: Implement simple_write_to_buffer

2010-05-10T21:08:17Z

It will be used in suspend code and serves as an easy wrap around copy_from_user. Similar to simple_read_from_buffer, it takes care of transfers with proper lengths depending on available and count parameters and advances ppos appropriately. Signed-off-by: Jiri Slaby Signed-off-by: Rafael J. Wysocki

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32Z

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

libfs: Unexport and kill simple_prepare_write

2010-03-03T18:00:17Z

Remove the EXPORT_UNUSED_SYMBOL of simple_prepare_write Collapse simple_prepare_write into it's only caller, though making it simpler and clearer to understand. Signed-off-by: Boaz Harrosh Signed-off-by: Al Viro

libfs: Open code simple_commit_write into only user

2010-03-03T18:00:16Z

* simple_commit_write was only called by simple_write_end. Open coding it makes it tiny bit less heavy on the arithmetic and much more readable. * While at it use zero_user() for clearing a partial page. * While at it add a docbook comment for simple_write_end. Signed-off-by: Boaz Harrosh Signed-off-by: Al Viro

libfs: move EXPORT_SYMBOL for d_alloc_name

2009-12-16T17:16:48Z

The EXPORT_SYMBOL for d_alloc_name is in fs/libfs.c but the function is in fs/dcache.c. Move the EXPORT_SYMBOL to the line immediately after the closing function brace line in fs/dcache.c as mentioned in Documentation/CodingStyle. Signed-off-by: H Hartley Sweeten Signed-off-by: Al Viro

libfs: return error code on failed attr set

2009-09-24T11:47:30Z

Currently all simple_attr.set handlers return 0 on success and negative codes on error. Fix simple_attr_write() to return these error codes. Signed-off-by: Wu Fengguang Cc: Theodore Ts'o Cc: Al Viro Cc: Christoph Hellwig Cc: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Al Viro