linux/drivers, branch v3.4.80

rtc-cmos: Add an alarm disable quirk

2014-02-13T19:51:20Z

commit d5a1c7e3fc38d9c7d629e1e47f32f863acbdec3d upstream. 41c7f7424259f ("rtc: Disable the alarm in the hardware (v2)") added the functionality to disable the RTC wake alarm when shutting down the box. However, there are at least two b0rked BIOSes we know about: https://bugzilla.novell.com/show_bug.cgi?id=812592 https://bugzilla.novell.com/show_bug.cgi?id=805740 where, when wakeup alarm is enabled in the BIOS, the machine reboots automatically right after shutdown, regardless of what wakeup time is programmed. Bisecting the issue lead to this patch so disable its functionality with a DMI quirk only for those boxes. Cc: Brecht Machiels Cc: Thomas Gleixner Cc: John Stultz Cc: Rabin Vincent Signed-off-by: Borislav Petkov [jstultz: Changed variable name for clarity, added extra dmi entry] Tested-by: Brecht Machiels Tested-by: Borislav Petkov Signed-off-by: John Stultz Signed-off-by: Greg Kroah-Hartman

PCI: Enable ARI if dev and upstream bridge support it; disable otherwise

2014-02-13T19:51:17Z

commit b0cc6020e1cc62f1253215f189611b34be4a83c7 upstream. Currently, we enable ARI in a device's upstream bridge if the bridge and the device support it. But we never disable ARI, even if the device is removed and replaced with a device that doesn't support ARI. This means that if we hot-remove an ARI device and replace it with a non-ARI multi-function device, we find only function 0 of the new device because the upstream bridge still has ARI enabled, and next_ari_fn() only returns function 0 for the new non-ARI device. This patch disables ARI in the upstream bridge if the device doesn't support ARI. See the PCIe spec, r3.0, sec 6.13. [bhelgaas: changelog, function comment] [yijing: replace PCIe Cap accessor with legacy PCI accessor] Signed-off-by: Yijing Wang Signed-off-by: Jiang Liu Signed-off-by: Bjorn Helgaas Signed-off-by: Greg Kroah-Hartman

drm/radeon/DCE4+: clear bios scratch dpms bit (v2)

2014-02-13T19:51:17Z

commit 6802d4bad83f50081b2788698570218aaff8d10e upstream. The BlankCrtc table in some DCE8 boards has some logic shortcuts for the vbios when this bit is set. Clear it for driver use. v2: fix typo Bug: https://bugs.freedesktop.org/show_bug.cgi?id=73420 Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman

drm/radeon: set the full cache bit for fences on r7xx+

2014-02-13T19:51:16Z

commit d45b964a22cad962d3ede1eba8d24f5cee7b2a92 upstream. Needed to properly flush the read caches for fences. Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman

drm/radeon: skip colorbuffer checking if COLOR_INFO.FORMAT is set to INVALID

2014-02-13T19:51:16Z

commit 56492e0fac2dbaf7735ffd66b206a90624917789 upstream. This fixes a bug which was causing rejections of valid GPU commands from userspace. Signed-off-by: Marek Olšák Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman

radeon/pm: Guard access to rdev->pm.power_state array

2014-02-13T19:51:15Z

commit 370169516e736edad3b3c5aa49858058f8b55195 upstream. It's never allocated on systems without an ATOMBIOS or COMBIOS ROM. Should fix an oops I encountered while resetting the GPU after a lockup on my PowerBook with an RV350. Signed-off-by: Michel Dänzer Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman

drm/radeon: warn users when hw_i2c is enabled (v2)

2014-02-13T19:51:15Z

commit d195178297de9a91246519dbfa98952b70f9a9b6 upstream. The hw i2c engines are disabled by default as the current implementation is still experimental. Print a warning when users enable it so that it's obvious when the option is enabled. v2: check for non-0 rather than 1 Signed-off-by: Alex Deucher Reviewed-by: Christian König Signed-off-by: Greg Kroah-Hartman

dm space map common: make sure new space is used during extend

2014-02-13T19:51:14Z

commit 12c91a5c2d2a8e8cc40a9552313e1e7b0a2d9ee3 upstream. When extending a low level space map we should update nr_blocks at the start so the new space is used for the index entries. Otherwise extend can fail, e.g.: sm_metadata_extend call sequence that fails: -> sm_ll_extend -> dm_tm_new_block -> dm_sm_new_block -> sm_bootstrap_new_block => returns -ENOSPC because smm->begin == smm->ll.nr_blocks Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman

dm: wait until embedded kobject is released before destroying a device

2014-02-13T19:51:14Z

commit be35f486108227e10fe5d96fd42fb2b344c59983 upstream. There may be other parts of the kernel holding a reference on the dm kobject. We must wait until all references are dropped before deallocating the mapped_device structure. The dm_kobject_release method signals that all references are dropped via completion. But dm_kobject_release doesn't free the kobject (which is embedded in the mapped_device structure). This is the sequence of operations: * when destroying a DM device, call kobject_put from dm_sysfs_exit * wait until all users stop using the kobject, when it happens the release method is called * the release method signals the completion and should return without delay * the dm device removal code that waits on the completion continues * the dm device removal code drops the dm_mod reference the device had * the dm device removal code frees the mapped_device structure that contains the kobject Using kobject this way should avoid the module unload race that was mentioned at the beginning of this thread: https://lkml.org/lkml/2014/1/4/83 Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman

spidev: fix hang when transfer_one_message fails

2014-02-13T19:51:12Z

commit e120cc0dcf2880a4c5c0a6cb27b655600a1cfa1d upstream. This corrects a problem in spi_pump_messages() that leads to an spi message hanging forever when a call to transfer_one_message() fails. This failure occurs in my MCP2210 driver when the cs_change bit is set on the last transfer in a message, an operation which the hardware does not support. Rationale Since the transfer_one_message() returns an int, we must presume that it may fail. If transfer_one_message() should never fail, it should return void. Thus, calls to transfer_one_message() should properly manage a failure. Fixes: ffbbdd21329f3 (spi: create a message queueing infrastructure) Signed-off-by: Daniel Santos Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman