linux/drivers, branch v3.4.44

mfd: adp5520: Restore mode bits on resume

2013-05-08T02:51:57Z

commit c6cc25fda58da8685ecef3f179adc7b99c8253b2 upstream. The adp5520 unfortunately also clears the BL_EN bit when the nSTNDBY bit is cleared. So we need to make sure to restore it during resume if it was set before suspend. Signed-off-by: Lars-Peter Clausen Acked-by: Michael Hennerich Signed-off-by: Samuel Ortiz Signed-off-by: Greg Kroah-Hartman

mmc: atmel-mci: pio hang on block errors

2013-05-08T02:51:57Z

commit bdbc5d0c60f3e9de3eeccf1c1a18bdc11dca62cc upstream. The driver is doing, by default, multi-block reads. When a block error occurs, card/block.c instigates a single block read: "mmcblk0: retrying using single block read". It leaves the sg chain intact and just changes the length attribute for the first sg entry and the overall sg_len parameter. When atmci_read_data_pio is called to read the single block of data it ignores the sg_len and expects to read more than 512 bytes as it sees there are multiple items in the sg list. No more data comes as the controller has only been commanded to get one block. Signed-off-by: Terry Barnaby Acked-by: Ludovic Desroches Signed-off-by: Chris Ball Signed-off-by: Greg Kroah-Hartman

mmc: core: Fix bit width test failing on old eMMC cards

2013-05-08T02:51:57Z

commit 836dc2fe89c968c10cada87e0dfae6626f8f9da3 upstream. PARTITION_SUPPORT needs to be set before doing the compare on version number so the bit width test does not get invalid data. Before this patch, a Sandisk iNAND eMMC card would detect 1-bit width although the hardware supports 4-bit. Only affects old emmc devices - pre 4.4 devices. Reported-by: Elad Yi Signed-off-by: Philip Rakity Signed-off-by: Chris Ball Signed-off-by: Greg Kroah-Hartman

mmc: at91/avr32/atmel-mci: fix DMA-channel leak on module unload

2013-05-08T02:51:57Z

commit 91cf54feecf815bec0b6a8d6d9dbd0e219f2f2cc upstream. Fix regression introduced by commit 796211b7953 ("mmc: atmel-mci: add pdc support and runtime capabilities detection") which removed the need for CONFIG_MMC_ATMELMCI_DMA but kept the Kconfig-entry as well as the compile guards around dma_release_channel() in remove(). Consequently, DMA is always enabled (if supported), but the DMA-channel is not released on module unload unless the DMA-config option is selected. Remove the no longer used CONFIG_MMC_ATMELMCI_DMA option completely. Signed-off-by: Johan Hovold Acked-by: Ludovic Desroches Signed-off-by: Chris Ball Signed-off-by: Greg Kroah-Hartman

ixgbe: fix EICR write in ixgbe_msix_other

2013-05-08T02:51:56Z

commit d87d830720a1446403ed38bfc2da268be0d356d1 upstream. Previously, the ixgbe_msix_other was writing the full 32bits of the set interrupts, instead of only the ones which the ixgbe_msix_other is handling. This resulted in a loss of performance when the X540's PPS feature is enabled due to sometimes clearing queue interrupts which resulted in the driver not getting the interrupt for cleaning the q_vector rings often enough. The fix is to simply mask the lower 16bits off so that this handler does not write them in the EICR, which causes them to remain high and be properly handled by the clean_rings interrupt routine as normal. Signed-off-by: Jacob Keller Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher Signed-off-by: Greg Kroah-Hartman

md: bad block list should default to disabled.

2013-05-08T02:51:56Z

commit 486adf72ccc0c235754923d47a2270c5dcb0c98b upstream. Maintenance of a bad-block-list currently defaults to 'enabled' and is then disabled when it cannot be supported. This is backwards and causes problem for dm-raid which didn't know to disable it. So fix the defaults, and only enabled for v1.x metadata which explicitly has bad blocks enabled. The problem with dm-raid has been present since badblock support was added in v3.1, so this patch is suitable for any -stable from 3.1 onwards. Reported-by: Jonathan Brassow Signed-off-by: NeilBrown Signed-off-by: Greg Kroah-Hartman

drivers/rtc/rtc-cmos.c: don't disable hpet emulation on suspend

2013-05-08T02:51:56Z

commit e005715efaf674660ae59af83b13822567e3a758 upstream. There's a bug where rtc alarms are ignored after the rtc cmos suspends but before the system finishes suspend. Since hpet emulation is disabled and it still handles the interrupts, a wake event is never registered which is done from the rtc layer. This patch reverts commit d1b2efa83fbf ("rtc: disable hpet emulation on suspend") which disabled hpet emulation. To fix the problem mentioned in that commit, hpet_rtc_timer_init() is called directly on resume. Signed-off-by: Derek Basehore Cc: Maxim Levitsky Cc: "H. Peter Anvin" Cc: Thomas Gleixner Cc: Ingo Molnar Cc: "Rafael J. Wysocki" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

PCI/PM: Fix fallback to PCI_D0 in pci_platform_power_transition()

2013-05-08T02:51:55Z

commit 769ba7212f2059ca9fe0c73371e3d415c8c1c529 upstream. Commit b51306c (PCI: Set device power state to PCI_D0 for device without native PM support) modified pci_platform_power_transition() by adding code causing dev->current_state for devices that don't support native PCI PM but are power-manageable by the platform to be changed to PCI_D0 regardless of the value returned by the preceding platform_pci_set_power_state(). In particular, that also is done if the platform_pci_set_power_state() has been successful, which causes the correct power state of the device set by pci_update_current_state() in that case to be overwritten by PCI_D0. Fix that mistake by making the fallback to PCI_D0 only happen if the platform_pci_set_power_state() has returned an error. [bhelgaas: folded in Yinghai's simplification, added URL & stable info] Reference: http://lkml.kernel.org/r/27806FC4E5928A408B78E88BBC67A2306F466BBA@ORSMSX101.amr.corp.intel.com Reported-by: Chris J. Benenati Signed-off-by: Rafael J. Wysocki Signed-off-by: Bjorn Helgaas Acked-by: Yinghai Lu Signed-off-by: Greg Kroah-Hartman

PCI / ACPI: Don't query OSC support with all possible controls

2013-05-08T02:51:54Z

commit 545d6e189a41c94c11f55045a771118eccc9d9eb upstream. Found problem on system that firmware that could handle pci aer. Firmware get error reporting after pci injecting error, before os boots. But after os boots, firmware can not get report anymore, even pci=noaer is passed. Root cause: BIOS _OSC has problem with query bit checking. It turns out that BIOS vendor is copying example code from ACPI Spec. In ACPI Spec 5.0, page 290: If (Not(And(CDW1,1))) // Query flag clear? { // Disable GPEs for features granted native control. If (And(CTRL,0x01)) // Hot plug control granted? { Store(0,HPCE) // clear the hot plug SCI enable bit Store(1,HPCS) // clear the hot plug SCI status bit } ... } When Query flag is set, And(CDW1,1) will be 1, Not(1) will return 0xfffffffe. So it will get into code path that should be for control set only. BIOS acpi code should be changed to "If (LEqual(And(CDW1,1), 0)))" Current kernel code is using _OSC query to notify firmware about support from OS and then use _OSC to set control bits. During query support, current code is using all possible controls. So will execute code that should be only for control set stage. That will have problem when pci=noaer or aer firmware_first is used. As firmware have that control set for os aer already in query support stage, but later will not os aer handling. We should avoid passing all possible controls, just use osc_control_set instead. That should workaround BIOS bugs with affected systems on the field as more bios vendors are copying sample code from ACPI spec. Signed-off-by: Yinghai Lu Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

i2c: xiic: must always write 16-bit words to TX_FIFO

2013-05-08T02:51:54Z

commit c39e8e4354ce4daf23336de5daa28a3b01f00aa6 upstream. The TX_FIFO register is 10 bits wide. The lower 8 bits are the data to be written, while the upper two bits are flags to indicate stop/start. The driver apparently attempted to optimize write access, by only writing a byte in those cases where the stop/start bits are zero. However, we have seen cases where the lower byte is duplicated onto the upper byte by the hardware, which causes inadvertent stop/starts. This patch changes the write access to the transmit FIFO to always be 16 bits wide. Signed off by: Steven A. Falco Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman