linux/drivers, branch v3.13.7

PNP / ACPI: proper handling of ACPI IO/Memory resource parsing failures

2014-03-24T04:44:20Z

commit 89935315f192abf7068d0044cefc84f162c3c81f upstream. Before commit b355cee88e3b (ACPI / resources: ignore invalid ACPI device resources), if acpi_dev_resource_memory()/acpi_dev_resource_io() returns false, it means the the resource is not a memeory/IO resource. But after commit b355cee88e3b, those functions return false if the given memory/IO resource entry is invalid (the length of the resource is zero). This breaks pnpacpi_allocated_resource(), because it now recognizes the invalid memory/io resources as resources of unknown type. Thus users see confusing warning messages on machines with zero length ACPI memory/IO resources. Fix the problem by rearranging pnpacpi_allocated_resource() so that it calls acpi_dev_resource_memory() for memory type and IO type resources only, respectively. Fixes: b355cee88e3b (ACPI / resources: ignore invalid ACPI device resources) Signed-off-by: Zhang Rui Reported-and-tested-by: Markus Trippelsdorf Reported-and-tested-by: Julian Wollrath Reported-and-tested-by: Paul Bolle [rjw: Changelog] Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

regulator: core: Change dummy supplies error message to a warning

2014-03-24T04:44:20Z

commit acc3d5cec84f82ebea535fa0bd9500ac3df2aee9 upstream. Change "dummy supplies not allowed" error message to warning instead, as this is a just warning message with no change to the behavior. [Added a CC to stable since some other bug fixes cause this to come up more frequently on PCs which is how it was noticed -- broonie] Signed-off-by: Shuah Khan Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

intel_pstate: Add support for Baytrail turbo P states

2014-03-24T04:44:19Z

commit 61d8d2abc15e9232c3914c55502b73e559366583 upstream. A documentation update exposed the existance of the turbo ratio register. Update baytrail support to use the turbo range. Signed-off-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

intel_pstate: Add setting voltage value for baytrail P states.

2014-03-24T04:44:19Z

commit 007bea098b869945a462420a1f9d442ff169f722 upstream. Baytrail requires setting P state and voltage pairs when adjusting the requested P state. Add function for retrieving the valid voltage values and modify *_set_pstate() functions to caluclate the appropriate voltage for the requested P state. Signed-off-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

SCSI: storvsc: NULL pointer dereference fix

2014-03-24T04:44:18Z

commit b12bb60d6c350b348a4e1460cd68f97ccae9822e upstream. If the initialization of storvsc fails, the storvsc_device_destroy() causes NULL pointer dereference. storvsc_bus_scan() scsi_scan_target() __scsi_scan_target() scsi_probe_and_add_lun(hostdata=NULL) scsi_alloc_sdev(hostdata=NULL) sdev->hostdata = hostdata now the host allocation fails __scsi_remove_device(sdev) calls sdev->host->hostt->slave_destroy() == storvsc_device_destroy(sdev) access of sdev->hostdata->request_mempool Signed-off-by: Ales Novak Signed-off-by: Thomas Abraham Reviewed-by: Jiri Kosina Acked-by: K. Y. Srinivasan Signed-off-by: James Bottomley Signed-off-by: Greg Kroah-Hartman

SCSI: qla2xxx: Fix multiqueue MSI-X registration.

2014-03-24T04:44:18Z

commit f324777ea88bab2522602671e46fc0851d7d5e35 upstream. This fixes requesting of the MSI-X vectors for the base response queue. The iteration in the for loop in qla24xx_enable_msix() was incorrect. We should only iterate of the first two MSI-X vectors and not the total number of MSI-X vectors that have given to the driver for this device from pci_enable_msix() in this function. Signed-off-by: Chad Dupuis Signed-off-by: Saurav Kashyap Signed-off-by: James Bottomley Signed-off-by: Greg Kroah-Hartman

SCSI: qla2xxx: Poll during initialization for ISP25xx and ISP83xx

2014-03-24T04:44:18Z

commit b77ed25c9f8402e8b3e49e220edb4ef09ecfbb53 upstream. Signed-off-by: Giridhar Malavali Signed-off-by: Saurav Kashyap Signed-off-by: James Bottomley Signed-off-by: Greg Kroah-Hartman

SCSI: isci: correct erroneous for_each_isci_host macro

2014-03-24T04:44:18Z

commit c59053a23d586675c25d789a7494adfdc02fba57 upstream. In the first place, the loop 'for' in the macro 'for_each_isci_host' (drivers/scsi/isci/host.h:314) is incorrect, because it accesses the 3rd element of 2 element array. After the 2nd iteration it executes the instruction: ihost = to_pci_info(pdev)->hosts[2] (while the size of the 'hosts' array equals 2) and reads an out of range element. In the second place, this loop is incorrectly optimized by GCC v4.8 (see http://marc.info/?l=linux-kernel&m=138998871911336&w=2). As a result, on platforms with two SCU controllers, the loop is executed more times than it can be (for i=0,1 and 2). It causes kernel panic during entering the S3 state and the following oops after 'rmmod isci': BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] __list_add+0x1b/0xc0 Oops: 0000 [#1] SMP RIP: 0010:[] [] __list_add+0x1b/0xc0 Call Trace: [] __mutex_lock_slowpath+0x114/0x1b0 [] mutex_lock+0x1f/0x30 [] sas_disable_events+0x1b/0x50 [libsas] [] sas_unregister_ha+0x18/0x60 [libsas] [] isci_unregister+0x1e/0x40 [isci] [] isci_pci_remove+0x5d/0x100 [isci] [] pci_device_remove+0x3b/0xb0 [] __device_release_driver+0x7f/0xf0 [] driver_detach+0xa8/0xb0 [] bus_remove_driver+0x9b/0x120 [] driver_unregister+0x2c/0x50 [] pci_unregister_driver+0x23/0x80 [] isci_exit+0x10/0x1e [isci] [] SyS_delete_module+0x16b/0x2d0 [] ? do_notify_resume+0x61/0xa0 [] system_call_fastpath+0x16/0x1b The loop has been corrected. This patch fixes kernel panic during entering the S3 state and the above oops. Signed-off-by: Lukasz Dorau Reviewed-by: Maciej Patelczyk Tested-by: Lukasz Dorau Signed-off-by: Dan Williams Signed-off-by: James Bottomley Signed-off-by: Greg Kroah-Hartman

SCSI: isci: fix reset timeout handling

2014-03-24T04:44:18Z

commit ddfadd7736b677de2d4ca2cd5b4b655368c85a7a upstream. Remove an erroneous BUG_ON() in the case of a hard reset timeout. The reset timeout handler puts the port into the "awaiting link-up" state. The timeout causes the device to be disconnected and we need to be in the awaiting link-up state to re-connect the port. The BUG_ON() made the incorrect assumption that resets never timeout and we always complete the reset in the "resetting" state. Testing this patch also uncovered that libata continues to attempt to reset the port long after the driver has torn down the context. Once the driver has committed to abandoning the link it must indicate to libata that recovery ends by returning -ENODEV from ->lldd_I_T_nexus_reset(). Acked-by: Lukasz Dorau Reported-by: David Milburn Reported-by: Xun Ni Tested-by: Xun Ni Signed-off-by: Dan Williams Signed-off-by: James Bottomley Signed-off-by: Greg Kroah-Hartman

can: flexcan: flexcan_remove(): add missing netif_napi_del()

2014-03-24T04:44:18Z

commit d96e43e8fce28cf97df576a07af9d65657a41a6f upstream. This patch adds the missing netif_napi_del() to the flexcan_remove() function. Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman