linux/drivers, branch v2.6.27.2

netdrvr: atl1e: Don't take the mdio_lock in atl1e_probe

2008-10-18T17:49:13Z

commit f382a0a8e9403c6d7f8b2cfa21e41fefb5d0c9bd upstream Lockdep warns about the mdio_lock taken with interrupts enabled then later taken from interrupt context. Initially, I considered changing these to spin_lock_irq/spin_unlock_irq, but then I looked at atl1e_phy_init() and saw that it calls msleep(). Sleeping while holding a spinlock is not allowed either. In the probe path, we haven't registered the interrupt handler, so it can't poke at this card yet. It's before we call register_netdev(), so I don't think any other threads can reach this card either. If I'm right, we don't need a spinlock at all. Signed-off-by: Matthew Wilcox Cc: Jay Cliburn Signed-off-by: Jeff Garzik Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

sky2: Fix WOL regression

2008-10-18T17:49:13Z

commit 9d731d77c9794bb0a264f58d35949a1ab6dcc41c upstream Since dev->power.should_wakeup bit is used by the PCI core to decide whether the device should wake up the system from sleep states, set/unset this bit whenever WOL is enabled/disabled using sky2_set_wol(). Remove an open-coded reference to the standard PCI PM registers that is not used any more. Signed-off-by: Rafael J. Wysocki Cc: Tino Keitel Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

b43legacy: Fix failure in rate-adjustment mechanism

2008-10-18T17:49:12Z

commit c6a2afdacccd56cc0be8e9a7977f0ed1509069f6 upstream Date: Sat, 6 Sep 2008 16:51:22 -0500 Subject: b43legacy: Fix failure in rate-adjustment mechanism A coding error present since b43legacy was incorporated into the kernel has prevented the driver from using the rate-setting mechanism of mac80211. The driver has been forced to remain at a 1 Mb/s rate. Signed-off-by: Larry Finger Signed-off-by: John W. Linville Signed-off-by: Greg Kroah-Hartman

libertas: clear current command on card removal

2008-10-18T17:49:12Z

commit 71b35f3abeb8f7f7e0afd7573424540cc5aae2d5 upstream If certain commands were in-flight when the card was pulled or the driver rmmod-ed, cleanup would block on the work queue stopping, but the work queue was in turn blocked on the current command being canceled, which didn't happen. Fix that. Signed-off-by: Dan Williams Signed-off-by: John W. Linville Signed-off-by: Greg Kroah-Hartman

tty: Termios locking - sort out real_tty confusions and lock reads

2008-10-18T17:49:11Z

commit 8f520021837d45c47d0ab57e7271f8d88bf7f3a4 upstream (only the tty_io.c portion of this commit) This moves us towards sanity and should mean our termios locking is now complete and comprehensive. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

hwmon: (abituguru3) Enable DMI probing feature on Abit AT8 32X

2008-10-09T13:33:59Z

Enable driver checking of the DMI product name (when enabled) on an Abit AT8 32X, instead of falling back to a manual probe. This eliminates false negatives and eventually will help avoid unnecessary bus probes on unsupported mainboards. Signed-off-by: Alistair John Strachan Tested-by: Daniel Exner Acked-by: Hans de Goede Signed-off-by: Jean Delvare

hwmon: (abituguru3) Enable reading from AUX3 fan on Abit AT8 32X

2008-10-09T13:33:59Z

The table for the Abit AT8 32X was incorrectly missing an entry for the sixth ("AUX3") fan. Add this entry, exporting the fan reading to userspace. Closes lm-sensors.org ticket #2339. Signed-off-by: Alistair John Strachan Tested-by: Daniel Exner Acked-by: Hans de Goede Signed-off-by: Jean Delvare

hwmon: (it87) Prevent power-off on Shuttle SN68PT

2008-10-09T13:33:58Z

On the Shuttle SN68PT, FAN_CTL2 is apparently not connected to a fan, but to something else. One user has reported instant system power-off when changing the PWM2 duty cycle, so we disable it. I use the board name string as the trigger in case the same board is ever used in other systems. This closes lm-sensors ticket #2349: pwmconfig causes a hard poweroff http://www.lm-sensors.org/ticket/2349 Signed-off-by: Jean Delvare

eeepc-laptop: Fix hwmon interface

2008-10-09T13:33:57Z

Creates a name file in the sysfs directory, that is needed for the libsensors library to work. Also rename fan1_pwm to pwm1 and scale its value as needed. This fixes bug #11520: http://bugzilla.kernel.org/show_bug.cgi?id=11520 Signed-off-by: Corentin Chary Signed-off-by: Jean Delvare

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

2008-10-08T18:40:19Z

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: tcp: Fix tcp_hybla zero congestion window growth with small rho and large cwnd. net: Fix netdev_run_todo dead-lock tcp: Fix possible double-ack w/ user dma net: only invoke dev->change_rx_flags when device is UP netrom: Fix sock_orphan() use in nr_release ax25: Quick fix for making sure unaccepted sockets get destroyed. Revert "ax25: Fix std timer socket destroy handling." [Bluetooth] Add reset quirk for A-Link BlueUSB21 dongle [Bluetooth] Add reset quirk for new Targus and Belkin dongles [Bluetooth] Fix double frees on error paths of btusb and bpa10x drivers