linux/drivers/usb, branch v3.1.8

USB: option: Removing one bogus and adding some new Huawei combinations

2011-12-21T20:58:36Z

commit 02a551c9755b799579e0a093bcc99b80b4dc1453 upstream. Huawei use the product code HUAWEI_PRODUCT_E353 (0x1506) for a number of different devices, which each can appear with a number of different descriptor sets. Different types of interfaces can be identified by looking at the subclass and protocol fields Subclass 1 protocol 8 is actually the data interface of a CDC ECM set, with subclass 1 protocol 9 as the control interface. Neither support serial data communcation, and cannot therefore be supported by this driver. At the same time, add a few other sets which appear if the device is configured in "Windows mode" using this modeswitch message: 55534243000000000000000000000011060000000100000000000000000000 Signed-off-by: Bjørn Mork Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: option: Add Huawei E398 controlling interfaces

2011-12-21T20:58:36Z

commit 414b591fd16655871e9f5592a55368b10a3ccc30 upstream. This patch adds the controlling interfaces for the Huawei E398. Thanks to Bjørn Mork for extracting the interface numbers from the windows driver. Signed-off-by: Alex Hermann Signed-off-by: Greg Kroah-Hartman

USB: cdc-acm: add IDs for Motorola H24 HSPA USB module.

2011-12-21T20:58:36Z

commit 6abff5dc4d5a2c90e597137ce8987e7fd439259b upstream. Add USB IDs for Motorola H24 HSPA USB module. Signed-off-by: Krzysztof Hałasa Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman

xHCI: fix bug in xhci_clear_command_ring()

2011-12-09T16:55:40Z

commit 158886cd2cf4599e04f9b7e10cb767f5f39b14f1 upstream. When system enters suspend, xHCI driver clears command ring by writing zero to all the TRBs. However, this also writes zero to the Link TRB, and the ring is mangled. This may cause driver accesses wrong memory address and the result is unpredicted. When clear the command ring, keep the last Link TRB intact, only clear its cycle bit. This should fix the "command ring full" issue reported by Oliver Neukum. This should be backported to stable kernels as old as 2.6.37, since the commit 89821320 "xhci: Fix command ring replay after resume" is merged. Signed-off-by: Andiry Xu Signed-off-by: Sarah Sharp Reported-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman

EHCI : Fix a regression in the ISO scheduler

2011-12-09T16:55:40Z

commit e3420901eba65b1c46bed86d360e3a8685d20734 upstream. Fix a regression that was introduced by commit 811c926c538f7e8d3c08b630dd5844efd7e000f6 (USB: EHCI: fix HUB TT scheduling issue with iso transfer). We detect an error if next == start, but this means uframe 0 can't be allocated anymore for iso transfer... Reported-by: Sander Eikelenboom Signed-off-by: Matthieu CASTET Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

USB: EHCI: fix HUB TT scheduling issue with iso transfer

2011-12-09T16:55:24Z

commit 811c926c538f7e8d3c08b630dd5844efd7e000f6 upstream. The current TT scheduling doesn't allow to play and then record on a full-speed device connected to a high speed hub. The IN iso stream can only start on the first uframe (0-2 for a 165 us) because of CSPLIT transactions. For the OUT iso stream there no such restriction. uframe 0-5 are possible. The idea of this patch is that the first uframe are precious (for IN TT iso stream) and we should allocate the last uframes first if possible. For that we reverse the order of uframe allocation (last uframe first). Here an example : hid interrupt stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | ---------------------------------------------------------------------- iso OUT stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 125 | 39 | 0 | 0 | 0 | 0 | 0 | ---------------------------------------------------------------------- There no place for iso IN stream (uframe 0-2 are used) and we got "cannot submit datapipe for urb 0, error -28: not enough bandwidth" error. With the patch this become. iso OUT stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 0 | 0 | 0 | 125 | 39 | 0 | 0 | ---------------------------------------------------------------------- iso IN stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 0 | 125 | 40 | 125 | 39 | 0 | 0 | ---------------------------------------------------------------------- Signed-off-by: Matthieu Castet Signed-off-by: Thomas Poussevin Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

USB: usb-storage: unusual_devs entry for Kingston DT 101 G2

2011-12-09T16:55:07Z

commit cec28a5428793b6bc64e56687fb239759d6da74e upstream. Kingston DT 101 G2 replies a wrong tag while transporting, add an unusal_devs entry to ignore the tag validation. Signed-off-by: Qinglin Ye Signed-off-by: Greg Kroah-Hartman

usb: option: add SIMCom SIM5218

2011-12-09T16:55:01Z

commit ec0cd94d881ca89cc9fb61d00d0f4b2b52e605b3 upstream. Tested with SIM5218EVB-KIT evaluation kit. Signed-off-by: Veli-Pekka Peltola Signed-off-by: Greg Kroah-Hartman

usb: option: add Huawei E353 controlling interfaces

2011-12-09T16:54:58Z

commit 46b1848360c8e634e0b063932a1261062fa0f7d6 upstream. This patch creates the missing controlling devices for the Huawei E353 HSPA+ stick. Signed-off-by: Dirk Nehring Signed-off-by: Greg Kroah-Hartman

usb: ftdi_sio: add PID for Propox ISPcable III

2011-12-09T16:54:56Z

commit 307369b0ca06b27b511b61714e335ddfccf19c4f upstream. Signed-off-by: Marcin Kościelnicki Signed-off-by: Greg Kroah-Hartman