linux/drivers/usb, branch v3.0.58

xhci: Add Lynx Point LP to list of Intel switchable hosts

2013-01-11T17:03:41Z

commit bb1e5dd7113d2fd178d3af9aca8f480ae0468edf upstream. Like Lynx Point, Lynx Point LP is also switchable. See 1c12443ab8eba71a658fae4572147e56d1f84f66 for more details. This patch should be backported to stable kernels as old as 3.0, that contain commit 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support EHCI/xHCI port switching." Signed-off-by: Russell Webb Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman

usb: gadget: phonet: free requests in pn_bind()'s error path

2013-01-11T17:03:37Z

commit d0eca719dd11ad0619e8dd6a1f3eceb95b0216dd upstream. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

xhci: Extend Fresco Logic MSI quirk.

2012-12-17T18:49:05Z

commit bba18e33f25072ebf70fd8f7f0cdbf8cdb59a746 upstream. Ali reports that plugging a device into the Fresco Logic xHCI host with PCI device ID 1400 produces an IRQ error: do_IRQ: 3.176 No irq handler for vector (irq -1) Other early Fresco Logic host revisions don't support MSI, even though their PCI config space claims they do. Extend the quirk to disabling MSI to this chipset revision. Also enable the short transfer quirk, since it's likely this revision also has that quirk, and it should be harmless to enable. 04:00.0 0c03: 1b73:1400 (rev 01) (prog-if 30 [XHCI]) Subsystem: 1d5c:1000 Physical Slot: 3 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Reported-by: A Sh Tested-by: A Sh Signed-off-by: Greg Kroah-Hartman

USB: OHCI: workaround for hardware bug: retired TDs not added to the Done Queue

2012-12-17T18:49:04Z

commit 50ce5c0683aa83eb161624ea89daa5a9eee0c2ce upstream. This patch (as1636) is a partial workaround for a hardware bug affecting OHCI controllers by NVIDIA at least, maybe others too. When the controller retires a Transfer Descriptor, it is supposed to add the TD onto the Done Queue. But sometimes this doesn't happen, with the result that ohci-hcd never realizes the corresponding transfer has finished. Symptoms can vary; a typical result is that USB audio stops working after a while. The patch works around the problem by recognizing that TDs are always processed in order. Therefore, if a later TD is found on the Done Queue than all the earlier TDs for the same endpoint must be finished as well. Unfortunately this won't solve the problem in cases where the missing TD is the last one in the endpoint's queue. A complete fix would require a signficant amount of change to the driver. Signed-off-by: Alan Stern Tested-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman

USB: mark uas driver as BROKEN

2012-12-17T18:49:04Z

commit fb37ef98015f864d22be223a0e0d93547cd1d4ef upstream. As reported https://bugzilla.kernel.org/show_bug.cgi?id=51031, the UAS driver causes problems and has been asked to be not built into any of the major distributions. To prevent users from running into problems with it, and for distros that were not notified, just mark the whole thing as broken. Acked-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman

USB: cp210x: add Virtenio Preon32 device id

2012-12-17T18:49:04Z

commit 356fe44f4b8ece867bdb9876b1854d7adbef9de2 upstream. Signed-off-by: Markus Becker Signed-off-by: Greg Kroah-Hartman

usb: ftdi_sio: fixup BeagleBone A5+ quirk

2012-12-17T18:49:04Z

commit 1a88d5eee2ef2ad1d3c4e32043e9c4c5347d4fc1 upstream. BeagleBone A5+ devices ended up getting shipped with the 'BeagleBone/XDS100V2' product string, and not XDS100 like it was agreed, so adjust the quirk to match. For details, see the thread on the beagle list: https://groups.google.com/forum/#!msg/beagleboard/zrFPew9_Wvo/ibWr1-eE8JwJ Signed-off-by: Peter Korsgaard Signed-off-by: Greg Kroah-Hartman

USB: ftdi_sio: Add support for Newport AGILIS motor drivers

2012-12-17T18:49:04Z

commit d7e14b375b40c04cd735b115713043b69a2c68ac upstream. The Newport AGILIS model AG-UC8 compact piezo motor controller (http://search.newport.com/?q=*&x2=sku&q2=AG-UC8) is yet another device using an FTDI USB-to-serial chip. It works fine with the ftdi_sio driver when adding options ftdi-sio product=0x3000 vendor=0x104d to modprobe.d. udevadm reports "Newport" as the manufacturer, and "Agilis" as the product name. Signed-off-by: Martin Teichmann Signed-off-by: Greg Kroah-Hartman

USB: option: blacklist network interface on Huawei E173

2012-12-17T18:49:03Z

commit f36446cf9bbebaa03a80d95cfeeafbaf68218249 upstream. The Huawei E173 will normally appear as 12d1:1436 in Linux. But the modem has another mode with different device ID and a slightly different set of descriptors. This is the mode used by Windows like this: 3Modem: USB\VID_12D1&PID_140C&MI_00\6&3A1D2012&0&0000 Networkcard: USB\VID_12D1&PID_140C&MI_01\6&3A1D2012&0&0001 Appli.Inter: USB\VID_12D1&PID_140C&MI_02\6&3A1D2012&0&0002 PC UI Inter: USB\VID_12D1&PID_140C&MI_03\6&3A1D2012&0&0003 All interfaces have the same ff/ff/ff class codes in this mode. Blacklisting the network interface to allow it to be picked up by the network driver. Reported-by: Thomas Schäfer Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman

USB: add new zte 3g-dongle's pid to option.c

2012-12-17T18:49:03Z

commit 31b6a1048b7292efff8b5b53ae3d9d29adde385e upstream. Signed-off-by: Rui li Signed-off-by: Greg Kroah-Hartman