linux/drivers/usb/storage, branch v3.10.29

USB: Nokia 502 is an unusual device

2014-02-06T19:08:13Z

commit 0e16114f2db4838251fb64f3b550996ad3585890 upstream. The USB storage operation of Nokia Asha 502 Dual SIM smartphone running Asha Platform 1.1.1 is unreliable in respect of data consistency (i.e. transfered files are corrupted). A similar issue is described here: http://discussions.nokia.com/t5/Asha-and-other-Nokia-Series-30/Nokia-301-USB-transfers-and-corrupted-files/td-p/1974170 The workaround is (MAX_SECTORS_64): rmmod usb_storage && modprobe usb_storage quirks=0421:06aa:m The patch adds the tested device to the unusual list permanently. Signed-off-by: Mikhail Zolotaryov Signed-off-by: Greg Kroah-Hartman

usb-storage: add quirk for mandatory READ_CAPACITY_16

2013-11-13T03:05:29Z

commit 32c37fc30c52508711ea6a108cfd5855b8a07176 upstream. Some USB drive enclosures do not correctly report an overflow condition if they hold a drive with a capacity over 2TB and are confronted with a READ_CAPACITY_10. They answer with their capacity modulo 2TB. The generic layer cannot cope with that. It must be told to use READ_CAPACITY_16 from the beginning. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman

USB: storage: Add MicroVault Flash Drive to unusual_devs

2013-08-04T08:50:36Z

commit e7a6121f4929c17215f0cdca3726f4bf3e4e9529 upstream. The device report an error capacity when read_capacity_16(). Using read_capacity_10() can get the correct capacity. Signed-off-by: Ren Bigcren Cc: Matthew Dharm Signed-off-by: Oskar Andero Signed-off-by: Greg Kroah-Hartman

USB: usb-stor: realtek_cr: Fix compile error

2013-05-17T00:28:27Z

To fix the compile error when CONFIG_PM_RUNTIME is not enabled, move the declaration of us out of CONFIG_REALTEK_AUTOPM macro in rts51x_chip. drivers/usb/storage/realtek_cr.c: In function 'realtek_cr_destructor': drivers/usb/storage/realtek_cr.c:942:11: error: 'struct rts51x_chip' has no member named 'us' Signed-off-by: Wei WANG Reported-by: Randy Dunlap Acked-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2013-05-02T00:51:54Z

Pull VFS updates from Al Viro, Misc cleanups all over the place, mainly wrt /proc interfaces (switch create_proc_entry to proc_create(), get rid of the deprecated create_proc_read_entry() in favor of using proc_create_data() and seq_file etc). 7kloc removed. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits) don't bother with deferred freeing of fdtables proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h proc: Make the PROC_I() and PDE() macros internal to procfs proc: Supply a function to remove a proc entry by PDE take cgroup_open() and cpuset_open() to fs/proc/base.c ppc: Clean up scanlog ppc: Clean up rtas_flash driver somewhat hostap: proc: Use remove_proc_subtree() drm: proc: Use remove_proc_subtree() drm: proc: Use minor->index to label things, not PDE->name drm: Constify drm_proc_list[] zoran: Don't print proc_dir_entry data in debug reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show() proc: Supply an accessor for getting the data from a PDE's parent airo: Use remove_proc_subtree() rtl8192u: Don't need to save device proc dir PDE rtl8187se: Use a dir under /proc/net/r8180/ proc: Add proc_mkdir_data() proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h} proc: Move PDE_NET() to fs/proc/proc_net.c ...

drivers/usb/storage/realtek_cr.c: fix build

2013-05-01T00:04:00Z

Remove unused local `us', which broke the build. Also nuke an unneeded cast. Repairs commit 191648d03d20 ("usb: storage: Convert US_DEBUGP to usb_stor_dbg"). Cc: Joe Perches Acked-by: David Rientjes Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

usb-storage: CY7C68300A chips do not support Cypress ATACB

2013-04-23T17:08:13Z

Many cards based on CY7C68300A/B/C use the USB ID 04b4:6830 but only the B and C variants (EZ-USB AT2LP) support the ATA Command Block functionality, according to the data sheets. The A variant (EZ-USB AT2) locks up if ATACB is attempted, until a typical 30 seconds timeout runs out and a USB reset is performed. https://bugs.launchpad.net/bugs/428469 It seems that one way to spot a CY7C68300A (at least where the card manufacturer left Cypress' EEPROM default vaules, against Cypress' recommendations) is to look at the USB string descriptor indices. A http://media.digikey.com/pdf/Data%20Sheets/Cypress%20PDFs/CY7C68300A.pdf B http://www.farnell.com/datasheets/43456.pdf C http://www.cypress.com/?rID=14189 Note that a CY7C68300B/C chip appears as CY7C68300A if it is running in Backward Compatibility Mode, and if ATACB would be supported in this case there is anyway no way to tell which chip it really is. For 5 years my external USB drive has been locking up for half a minute when plugged in and ata_id is run by udev, or anytime hdparm or similar is run on it. Finally looking at the /correct/ datasheet I think I found the reason. I am aware the quirk in this patch is a bit hacky, but the hardware manufacturers haven't made it easy for us. Signed-off-by: Tormod Volden Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: storage: convert to use module_usb_driver()

2013-04-19T18:50:10Z

Now that Joe cleaned up the init/exit functions, we can just get rid of them entirely and use the proper macro that almost all other USB drivers now use. Cc: Matthew Dharm Cc: Joe Perches Signed-off-by: Greg Kroah-Hartman

usb: storage: Convert US_DEBUGP to usb_stor_dbg

2013-04-19T18:46:50Z

Use a more current logging style with dev_printk where possible. o Convert uses of US_DEBUGP to usb_stor_dbg o Add "struct us_data *" to usb_stor_dbg uses o usb_stor_dbg now uses struct device */dev_vprint_emit o Removed embedded function names o Coalesce formats o Remove trailing whitespace o Remove useless OOM messages o Remove useless function entry/exit logging o Convert some US_DEBUGP uses to dev_info and dev_dbg Object size is slightly reduced when debugging is enabled, slightly increased with no debugging because some initialization and removal messages are now always emitted. Signed-off-by: Joe Perches Signed-off-by: Greg Kroah-Hartman

usb: storage: Fix link error

2013-04-19T02:02:59Z

Fix allmodconfig link error introduced by commit 75b9130e8a ("usb: storage: Add usb_stor_dbg, reduce object size") Export the symbol usb_stor_dbg. Add export.h Reported-by: Stephen Rothwell Signed-off-by: Joe Perches Signed-off-by: Greg Kroah-Hartman