linux/drivers/usb/storage, branch v3.1

USB: usb-storage: unusual_devs entry for ARM V2M motherboard.

2011-08-08T19:34:46Z

Connecting the V2M to a Linux host results in a constant stream of errors spammed to the console, all of the form sd 1:0:0:0: ioctl_internal_command return code = 8070000 : Sense Key : 0x4 [current] : ASC=0x0 ASCQ=0x0 The errors appear to be otherwise harmless. Add an unusual_devs entry which eliminates all of the error messages. Signed-off-by: Nick Bowler Acked-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman

Merge branch 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6

2011-07-26T06:26:34Z

* 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (741 commits) staging:iio:meter:ade7753 should be 16 bit read not 8 bit for mode register. staging:iio:kfifo_buf fix double initialization of the ring device structure. staging:iio:accel:lis3l02dq: fix incorrect pointer passed to spi_set_drvdata. staging:iio:imu fix missing register table index for some channels spectra: enable device before poking it staging: rts_pstor: Fix a miswriting staging/lirc_bt829: Return -ENODEV when no hardware is found. staging/lirc_parallel: remove pointless prototypes. staging/lirc_parallel: fix panic on rmmod staging:iio:adc:ad7476: Incorrect pointer into spi_set_drvdata. Staging: zram: Fix kunmapping order Revert "gma500: Fix dependencies" gma500: Add medfield header gma500: wire up the mrst i2c bus from chip_info gma500: Fix DPU build gma500: Clean up the DPU config and make it runtime gma500: resync with Medfield progress gma500: Use the mrst helpers and power control for mode commit gma500@ Fix backlight range error gma500: More Moorestown muddle meddling means MM maybe might modeset ... Fix up fairly trivial conflicts all over, mostly due to header file cleanup conflicts, but some deleted files and some just context changes: - Documentation/feature-removal-schedule.txt - drivers/staging/bcm/headers.h - drivers/staging/brcm80211/brcmfmac/dhd_linux.c - drivers/staging/brcm80211/brcmfmac/dhd_sdio.c - drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h - drivers/staging/brcm80211/brcmfmac/wl_iw.c - drivers/staging/et131x/et131x_netdev.c - drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c - drivers/staging/rtl8192e/r8192E.h - drivers/staging/usbip/userspace/src/utils.h

Staging: Merge ENE UB6250 MS card codes from keucr to drivers/usb/storage/ene_ub6250.c

2011-07-08T21:12:52Z

Merge ENE UB6250 MS card codes from keucr to drivers/usb/storage/ene_ub6250.c. Signed-off-by: Cho, Yu-Chen Signed-off-by: Greg Kroah-Hartman

Realtek cr: Add autosuspend function.

2011-07-01T21:53:42Z

The autosuspend function can be disabled by unchecking the Macro CONFIG_REALTEK_AUTOPM in kernel config file, by default, this macro is turned on. Signed-off-by: edwin_rong Signed-off-by: Greg Kroah-Hartman

Realtek cr: Remove unused Macros

2011-07-01T21:53:41Z

Remove Macros wait_timeout() and wait_timeout_x(). Signed-off-by: edwin_rong Signed-off-by: Greg Kroah-Hartman

Realtek cr: clean up unnecessary whitespaces.

2011-07-01T21:53:41Z

Signed-off-by: edwin_rong Signed-off-by: Greg Kroah-Hartman

usb-storage: redo incorrect reads

2011-06-07T16:05:42Z

Some USB mass-storage devices have bugs that cause them not to handle the first READ(10) command they receive correctly. The Corsair Padlock v2 returns completely bogus data for its first read (possibly it returns the data in encrypted form even though the device is supposed to be unlocked). The Feiya SD/SDHC card reader fails to complete the first READ(10) command after it is plugged in or after a new card is inserted, returning a status code that indicates it thinks the command was invalid, which prevents the kernel from retrying the read. Since the first read of a new device or a new medium is for the partition sector, the kernel is unable to retrieve the device's partition table. Users have to manually issue an "hdparm -z" or "blockdev --rereadpt" command before they can access the device. This patch (as1470) works around the problem. It adds a new quirk flag, US_FL_INVALID_READ10, indicating that the first READ(10) should always be retried immediately, as should any failing READ(10) commands (provided the preceding READ(10) command succeeded, to avoid getting stuck in a loop). The patch also adds appropriate unusual_devs entries containing the new flag. Signed-off-by: Alan Stern Tested-by: Sven Geggus Tested-by: Paul Hartman CC: Matthew Dharm CC: Signed-off-by: Greg Kroah-Hartman

Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

2011-05-23T19:33:02Z

* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (205 commits) USB: EHCI: Remove SPARC_LEON {read,write}_be definitions from ehci.h USB: UHCI: Support big endian GRUSBHC HC sparc: add {read,write}*_be routines USB: UHCI: Add support for big endian descriptors USB: UHCI: Use ACCESS_ONCE rather than using a full compiler barrier USB: UHCI: Add support for big endian mmio usb-storage: Correct adjust_quirks to include latest flags usb/isp1760: Fix possible unlink problems usb/isp1760: Move function isp1760_endpoint_disable() within file. USB: remove remaining usages of hcd->state from usbcore and fix regression usb: musb: ux500: add configuration and build options for ux500 dma usb: musb: ux500: add dma glue layer for ux500 usb: musb: ux500: add dma name for ux500 usb: musb: ux500: add ux500 specific code for gadget side usb: musb: fix compile error usb-storage: fix up the unusual_realtek device list USB: gadget: f_audio: Fix invalid dereference of initdata EHCI: don't rescan interrupt QHs needlessly OHCI: fix regression caused by nVidia shutdown workaround USB: OTG: msm: Free VCCCX regulator even if we can't set the voltage ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2011-05-23T16:12:26Z

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) b43: fix comment typo reqest -> request Haavard Skinnemoen has left Atmel cris: typo in mach-fs Makefile Kconfig: fix copy/paste-ism for dell-wmi-aio driver doc: timers-howto: fix a typo ("unsgined") perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course'). treewide: fix a few typos in comments regulator: change debug statement be consistent with the style of the rest Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations" audit: acquire creds selectively to reduce atomic op overhead rtlwifi: don't touch with treewide double semicolon removal treewide: cleanup continuations and remove logging message whitespace ath9k_hw: don't touch with treewide double semicolon removal include/linux/leds-regulator.h: fix syntax in example code tty: fix typo in descripton of tty_termios_encode_baud_rate xtensa: remove obsolete BKL kernel option from defconfig m68k: fix comment typo 'occcured' arch:Kconfig.locks Remove unused config option. treewide: remove extra semicolons ...

usb-storage: Correct adjust_quirks to include latest flags

2011-05-19T23:34:05Z

Commits ae38c78a03e1b77ad45248fcf097e4568e740209 and 00914025cc4e783d4703b4db1d47b41f389e50c8 added quirk flags US_FL_NO_READ_DISC_INFO and US_FL_NO_READ_CAPACITY_16 to the usb-storage driver. However they did not add the corresponding flags to adjust_quirks() in usb.c, so there was no facility for a user to over-ride/add them via the quirks module parameter. Signed-off-by: Karl Relton Signed-off-by: Greg Kroah-Hartman