linux/drivers/usb/core, branch v3.4.80

usb: core: get config and string descriptors for unauthorized devices

2014-02-06T19:05:48Z

commit 83e83ecb79a8225e79bc8e54e9aff3e0e27658a2 upstream. There is no need to skip querying the config and string descriptors for unauthorized WUSB devices when usb_new_device is called. It is allowed by WUSB spec. The only action that needs to be delayed until authorization time is the set config. This change allows user mode tools to see the config and string descriptors earlier in enumeration which is needed for some WUSB devices to function properly on Android systems. It also reduces the amount of divergent code paths needed for WUSB devices. Signed-off-by: Thomas Pugliese Signed-off-by: Greg Kroah-Hartman

usb: hub: Use correct reset for wedged USB3 devices that are NOTATTACHED

2013-12-20T15:34:19Z

commit 2d51f3cd11f414c56a87dc018196b85fd50b04a4 upstream. This patch adds a check for USB_STATE_NOTATTACHED to the hub_port_warm_reset_required() workaround for ports that end up in Compliance Mode in hub_events() when trying to decide which reset function to use. Trying to call usb_reset_device() with a NOTATTACHED device will just fail and leave the port broken. Signed-off-by: Julius Werner Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

usb: fix cleanup after failure in hub_configure()

2013-11-20T18:43:19Z

commit d0308d4b6b02597f39fc31a9bddf7bb3faad5622 upstream. If the hub_configure() fails after setting the hdev->maxchild the hub->ports might be NULL or point to uninitialized kzallocated memory causing NULL pointer dereference in hub_quiesce() during cleanup. Now after such error the hdev->maxchild is set to 0 to avoid cleanup of uninitialized ports. Signed-off-by: Krzysztof Mazur Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

USB: quirks: add touchscreen that is dazzeled by remote wakeup

2013-11-13T03:01:47Z

commit 614ced91fc6fbb5a1cdd12f0f1b6c9197d9f1350 upstream. The device descriptors are messed up after remote wakeup Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman

USB: quirks.c: add one device that cannot deal with suspension

2013-11-13T03:01:47Z

commit 4294bca7b423d1a5aa24307e3d112a04075e3763 upstream. The device is not responsive when resumed, unless it is reset. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman

usb/core/devio.c: Don't reject control message to endpoint with wrong direction bit

2013-10-05T14:06:54Z

commit 831abf76643555a99b80a3b54adfa7e4fa0a3259 upstream. Trying to read data from the Pegasus Technologies NoteTaker (0e20:0101) [1] with the Windows App (EasyNote) works natively but fails when Windows is running under KVM (and the USB device handed to KVM). The reason is a USB control message usb 4-2.2: control urb: bRequestType=22 bRequest=09 wValue=0200 wIndex=0001 wLength=0008 This goes to endpoint address 0x01 (wIndex); however, endpoint address 0x01 does not exist. There is an endpoint 0x81 though (same number, but other direction); the app may have meant that endpoint instead. The kernel thus rejects the IO and thus we see the failure. Apparently, Linux is more strict here than Windows ... we can't change the Win app easily, so that's a problem. It seems that the Win app/driver is buggy here and the driver does not behave fully according to the USB HID class spec that it claims to belong to. The device seems to happily deal with that though (and seems to not really care about this value much). So the question is whether the Linux kernel should filter here. Rejecting has the risk that somewhat non-compliant userspace apps/ drivers (most likely in a virtual machine) are prevented from working. Not rejecting has the risk of confusing an overly sensitive device with such a transfer. Given the fact that Windows does not filter it makes this risk rather small though. The patch makes the kernel more tolerant: If the endpoint address in wIndex does not exist, but an endpoint with toggled direction bit does, it will let the transfer through. (It does NOT change the message.) With attached patch, the app in Windows in KVM works. usb 4-2.2: check_ctrlrecip: process 13073 (qemu-kvm) requesting ep 01 but needs 81 I suspect this will mostly affect apps in virtual environments; as on Linux the apps would have been adapted to the stricter handling of the kernel. I have done that for mine[2]. [1] http://www.pegatech.com/ [2] https://sourceforge.net/projects/notetakerpen/ Signed-off-by: Kurt Garloff Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

usb: config->desc.bLength may not exceed amount of data returned by the device

2013-09-27T00:15:32Z

commit b4f17a488ae2e09bfcf95c0e0b4219c246f1116a upstream. While reading the config parsing code I noticed this check is missing, without this check config->desc.wTotalLength can end up with a value larger then the dev->rawdescriptors length for the config, and when userspace then tries to get the rawdescriptors bad things may happen. Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman

usb: add two quirky touchscreen

2013-08-20T15:26:28Z

commit 304ab4ab079a8ed03ce39f1d274964a532db036b upstream. These devices tend to become unresponsive after S3 Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman

usb: core: don't try to reset_device() a port that got just disconnected

2013-08-15T05:57:07Z

commit 481f2d4f89f87a0baa26147f323380e31cfa7c44 upstream. The USB hub driver's event handler contains a check to catch SuperSpeed devices that transitioned into the SS.Inactive state and tries to fix them with a reset. It decides whether to do a plain hub port reset or call the usb_reset_device() function based on whether there was a device attached to the port. However, there are device/hub combinations (found with a JetFlash Transcend mass storage stick (8564:1000) on the root hub of an Intel LynxPoint PCH) which can transition to the SS.Inactive state on disconnect (and stay there long enough for the host to notice). In this case, above-mentioned reset check will call usb_reset_device() on the stale device data structure. The kernel will send pointless LPM control messages to the no longer connected device address and can even cause several 5 second khubd stalls on some (buggy?) host controllers, before finally accepting the device's fate amongst a flurry of error messages. This patch makes the choice of reset dependent on the port status that has just been read from the hub in addition to the existence of an in-kernel data structure for the device, and only proceeds with the more extensive reset if both are valid. Signed-off-by: Julius Werner Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman

usb: Clear both buffers when clearing a control transfer TT buffer.

2013-08-04T08:25:53Z

commit 2c7b871b9102c497ba8f972aa5d38532f05b654d upstream. Control transfers have both IN and OUT (or SETUP) packets, so when clearing TT buffers for a control transfer it's necessary to send two HUB_CLEAR_TT_BUFFER requests to the hub. Signed-off-by: William Gulland Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman