linux/drivers/usb/core/driver.c, branch v2.6.34.3

USB: obey the sysfs power/wakeup setting

2010-08-02T17:29:59Z

commit 48826626263d4a61d06fd8c5805da31f925aefa0 upstream. This patch (as1403) is a partial reversion of an earlier change (commit 5f677f1d45b2bf08085bbba7394392dfa586fa8e "USB: fix remote wakeup settings during system sleep"). After hearing from a user, I realized that remote wakeup should be enabled during system sleep whenever userspace allows it, and not only if a driver requests it too. Indeed, there could be a device with no driver, that does nothing but generate a wakeup request when the user presses a button. Such a device should be allowed to do its job. The problem fixed by the earlier patch -- device generating a wakeup request for no reason, causing system suspend to abort -- was also addressed by a later patch ("USB: don't enable remote wakeup by default", accepted but not yet merged into mainline). The device won't be able to generate the bogus wakeup requests because it will be disabled for remote wakeup by default. Hence this reversion will not re-introduce any old problems. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

USB: unbind all interfaces before rebinding them

2010-07-05T18:22:50Z

commit c043f1245654a726925529007210e9f786426448 upstream. This patch (as1387) fixes a bug introduced during the changeover to the runtime PM framework. When a driver doesn't support resume or reset-resume, and consequently its interfaces need to be unbound and rebound, we have to unbind all the interfaces before trying to rebind any of them. Otherwise the driver's probe method for one interface could try to claim a different interface and fail, because that other interface hasn't been unbound yet. This fixes Bugzilla #15788. The symptom is that some USB sound cards don't work after hibernation. Signed-off-by: Alan Stern Tested-by: François Valenduc Signed-off-by: Greg Kroah-Hartman

USB: put claimed interfaces in the "suspended" state

2010-04-22T22:18:28Z

This patch (as1370) fixes a bug in the USB runtime power management code. When a driver claims an interface, it doesn't expect to need to call usb_autopm_get_interface() or usb_autopm_put_interface() for runtime PM to work. Runtime PM can be controlled by the driver's primary interface; the additional interfaces it claims shouldn't interfere. As things stand, the claimed interfaces will prevent the device from autosuspending. To fix this problem, the patch sets interfaces to the suspended state when they are claimed. Also, although in theory this shouldn't matter, the patch changes the suspend code so that interfaces are suspended in reverse order from detection and resuming. This is how the PM core works, and we ought to use the same approach. Signed-off-by: Alan Stern Debugged-and-tested-by: Dominik Brodowski Signed-off-by: Greg Kroah-Hartman

USB: fix remote wakeup settings during system sleep

2010-04-22T22:18:27Z

This patch (as1363) changes the way USB remote wakeup is handled during system sleeps. It won't be enabled unless an interface driver specifically needs it. Also, it won't be enabled during the FREEZE or QUIESCE phases of hibernation, when the system doesn't respond to wakeup events anyway. Finally, if the device is already runtime-suspended with remote wakeup enabled, but wakeup is supposed to be disabled for the system sleep, the device gets woken up so that it can be suspended again with the proper wakeup setting. This will fix problems people have reported with certain USB webcams that generate wakeup requests when they shouldn't, and as a result cause system suspends to fail. See https://bugs.launchpad.net/ubuntu/+source/linux/+bug/515109 Signed-off-by: Alan Stern Tested-by: Erik Andrén CC: Signed-off-by: Greg Kroah-Hartman

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32Z

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

Driver core: create lock/unlock functions for struct device

2010-03-08T01:04:52Z

In the future, we are going to be changing the lock type for struct device (once we get the lockdep infrastructure properly worked out) To make that changeover easier, and to possibly burry the lock in a different part of struct device, let's create some functions to lock and unlock a device so that no out-of-core code needs to be changed in the future. This patch creates the device_lock/unlock/trylock() functions, and converts all in-tree users to them. Cc: Thomas Gleixner Cc: Jean Delvare Cc: Dave Young Cc: Ming Lei Cc: Jiri Kosina Cc: Phil Carmody Cc: Arjan van de Ven Cc: Cornelia Huck Cc: Rafael J. Wysocki Cc: Pavel Machek Cc: Len Brown Cc: Magnus Damm Cc: Alan Stern Cc: Randy Dunlap Cc: Stefan Richter Cc: David Brownell Cc: Vegard Nossum Cc: Jesse Barnes Cc: Alex Chiang Cc: Kenji Kaneshige Cc: Andrew Morton Cc: Andrew Patterson Cc: Yu Zhao Cc: Dominik Brodowski Cc: Samuel Ortiz Cc: Wolfram Sang Cc: CHENG Renquan Cc: Oliver Neukum Cc: Frans Pop Cc: David Vrabel Cc: Kay Sievers Cc: Sarah Sharp Signed-off-by: Greg Kroah-Hartman

USB: remove debugging message for uevent constructions

2010-03-02T22:55:02Z

This patch (as1332) removes an unneeded and annoying debugging message announcing all USB uevent constructions. Signed-off-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: convert to the runtime PM framework

2010-03-02T22:54:12Z

This patch (as1329) converts the USB stack over to the PM core's runtime PM framework. This involves numerous changes throughout usbcore, especially to hub.c and driver.c. Perhaps the most notable change is that CONFIG_USB_SUSPEND now depends on CONFIG_PM_RUNTIME instead of CONFIG_PM. Several fields in the usb_device and usb_interface structures are no longer needed. Some code which used to depend on CONFIG_USB_PM now depends on CONFIG_USB_SUSPEND (requiring some rearrangement of header files). The only visible change in behavior should be that following a system sleep (resume from RAM or resume from hibernation), autosuspended USB devices will be resumed just like everything else. They won't remain suspended. But if they aren't in use then they will naturally autosuspend again in a few seconds. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

USB: rearrange functions in driver.c

2010-03-02T22:54:11Z

This patch (as1328) reorders the functions in drivers/usb/core/driver.c so as to put all the routines dependent on CONFIG_PM in one place. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

USB: implement usb_enable_autosuspend

2010-03-02T22:54:10Z

This patch (as1326) adds usb_enable_autosuspend() and usb_disable_autosuspend() routines for use by drivers. If a driver knows that its device can handle suspends and resumes correctly, it can enable autosuspend all by itself. This is equivalent to the user writing "auto" to the device's power/level attribute. The implementation differs slightly from what it used to be. Now autosuspend is disabled simply by doing usb_autoresume_device() (to increment the usage counter) and enabled by doing usb_autosuspend_device() (to decrement the usage counter). The set_level() attribute method is updated to use the new routines, and the USB Power-Management documentation is updated. The patch adds a usb_enable_autosuspend() call to the hub driver's probe routine, allowing the special-case code for hubs in quirks.c to be removed. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman