linux/drivers/tty/serial, branch v3.16

serial: imx: Fix build breakage

2014-07-12T00:43:13Z

Fix breakage introduced by commit c557d392fbf5badd693ea1946a4317c87a26a716, 'serial: Test for no tx data on tx restart'. Reported-by: Stephen Rothwell Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman

serial: arc_uart: Use uart_circ_empty() for open-coded comparison

2014-07-10T23:31:34Z

Replace open-coded test for empty tx ring buffer with equivalent helper function, uart_circ_empty(). No functional change. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman

serial: Test for no tx data on tx restart

2014-07-10T23:31:34Z

Commit 717f3bbab3c7628736ef738fdbf3d9a28578c26c, 'serial_core: Fix conditional start_tx on ring buffer not empty' exposes an incorrect assumption in several drivers' start_tx methods; the tx ring buffer can, in fact, be empty when restarting tx while performing flow control. Affected drivers: sunsab.c ip22zilog.c pmac_zilog.c sunzilog.c m32r_sio.c imx.c Other in-tree serial drivers either are not affected or already test for empty tx ring buffer before transmitting. Test for empty tx ring buffer in start_tx() method, after transmitting x_char (if applicable). Reported-by: Aaro Koskinen Cc: Seth Bollinger Cc: "David S. Miller" Cc: Sam Ravnborg Cc: Thomas Bogendoerfer Signed-off-by: Peter Hurley Cc: stable # 3.15 Signed-off-by: Greg Kroah-Hartman

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2014-06-25T19:19:01Z

Pull ARM SoC fixes from Arnd Bergmann: "A new set of bug fixes for 3.16, containing patches for seven platforms: at91: - drivers/misc fix for Kconfig PWM symbol - correction of several values in DT after conversion to CCF - fix at91sam9261/at91sam9261ek mistake in slow crystal vs. slow RC osc imx: - Use GPIO for card CD/WP on imx51-babbage and eukrea-mbimxsd51, because controller base CD/WP is not working in esdhc driver due to runtime PM support - A couple of random ventana gw5xxx board fixes - Add IMX_IPUV3_CORE back to defconfig, which gets lost when moving IPUv3 driver out of staging tree - Fix enet/fec clock selection on imx6sl - Fix display node on imx53-m53evk board - A couple of Cubox-i updates from Russell, which were omitted from the merge window due to dependency integrator: - fix an OF-related regression against 3.15 mvebu: - mvebu (v7) - Fix broken SoC ID detection - Select ARM_CPU_SUSPEND for v7 - Remove armada38x compatible string (no users yet) - Enable Dove SoC in mvebu_v7_defconfig - kirkwood - Fix phy-connection-type on GuruPlug board qcom: - enable gsbi driver in defconfig - fix section mismatch warning in serial driver samsung: - use WFI macro in platform_do_lowpower because exynos cpuhotplug includes a hardcoded WFI instruction and it causes compile error in Thumb-2 mode. - fix GIC reg sizes for exynos4 SoCs - remove reset timer counter value during boot and resume for mct to fix a big jump in printk timestamps - fix pm code to check cortex-A9 for another exynos SoCs - don't rely on firmware's secondary_cpu_start for mcpm sti: - Ethernet clocks were wrongly defined for STiH415/416 platforms - STiH416 B2020 revision E DTS file name contained uppercase, change to lowercase" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (33 commits) ARM: at91/dt: sam9261: remove slow RC osc ARM: at91/dt: define sam9261ek slow crystal frequency ARM: at91/dt: sam9261: correctly define mainck ARM: at91/dt: sam9n12: correct PLLA ICPLL and OUT values ARM: at91/dt: sam9x5: correct PLLA ICPLL and OUT values misc: atmel_pwm: fix Kconfig symbols ARM: integrator: fix OF-related regression ARM: mvebu: Fix the improper use of the compatible string armada38x using a wildcard ARM: dts: kirkwood: fix phy-connection-type for Guruplug ARM: EXYNOS: Don't rely on firmware's secondary_cpu_start for mcpm ARM: dts: imx51-eukrea-mbimxsd51-baseboard: unbreak esdhc. ARM: dts: imx51-babbage: Fix esdhc setup ARM: dts: mx5: Move the display out of soc {} node ARM: dts: mx5: Fix IPU port node placement ARM: mvebu: select ARM_CPU_SUSPEND for Marvell EBU v7 platforms ARM: mvebu: Fix broken SoC ID detection ARM: imx_v6_v7_defconfig: Enable CONFIG_IMX_IPUV3_CORE ARM: multi_v7_defconfig: Add QCOM GSBI driver ARM: stih41x: Rename stih416-b2020-revE.dts to stih416-b2020e.dts tty: serial: msm: Fix section mismatch warning ...

tty/serial: fix 8250 early console option passing to regular console

2014-06-19T20:07:26Z

In the conversion to generic early console, the passing of options from the early 8250 console to the regular ttyS console was broken. This resulted in the baud rate changing when switching consoles during boot. This feature allows specifying a single console option on the kernel command line rather than both an early console and regular serial tty console. It would be nice to generalize this feature. However, it only works if the correct baud rate can be probed early which is not the case on many platforms which have non-standard UART clock rates. So for now, this is left as an 8250 specific feature. Reported-and-tested-by: Tony Luck Signed-off-by: Rob Herring Cc: Jiri Slaby Signed-off-by: Greg Kroah-Hartman

serial: Fix IGNBRK handling

2014-06-19T20:04:52Z

If IGNBRK is set without either BRKINT or PARMRK set, some uart drivers send a 0x00 byte for BREAK without the TTYBREAK flag to the line discipline, when it should send either nothing or the TTYBREAK flag set. This happens because the read_status_mask masks out the BI condition, which uart_insert_char() then interprets as a normal 0x00 byte. SUS v3 is clear regarding the meaning of IGNBRK; Section 11.2.2, General Terminal Interface - Input Modes, states: "If IGNBRK is set, a break condition detected on input shall be ignored; that is, not put on the input queue and therefore not read by any process." Fix read_status_mask to include the BI bit if IGNBRK is set; the lsr status retains the BI bit if a BREAK is recv'd, which is subsequently ignored in uart_insert_char() when masked with the ignore_status_mask. Affected drivers: 8250 - all serial_txx9 mfd amba-pl010 amba-pl011 atmel_serial bfin_uart dz ip22zilog max310x mxs-auart netx-serial pnx8xxx_uart pxa sb1250-duart sccnxp serial_ks8695 sirfsoc_uart st-asc vr41xx_siu zs sunzilog fsl_lpuart sunsab ucc_uart bcm63xx_uart sunsu efm32-uart pmac_zilog mpsc msm_serial m32r_sio Unaffected drivers: omap-serial rp2 sa1100 imx icom Annotated for fixes: altera_uart mcf Drivers without break detection: 21285 xilinx-uartps altera_jtaguart apbuart arc-uart clps711x max3100 uartlite msm_serial_hs nwpserial lantiq vt8500_serial Unknown: samsung mpc52xx_uart bfin_sport_uart cpm_uart/core Fixes: Bugzilla #71651, '8250_core.c incorrectly handles IGNBRK flag' Reported-by: Ivan Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman

tty: serial: msm: Fix section mismatch warning

2014-06-18T12:59:53Z

WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() The variable msm_platform_driver references the function __init msm_serial_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Signed-off-by: Kumar Gala Signed-off-by: Arnd Bergmann

serial: samsung: Fix build error

2014-06-18T00:09:36Z

Fixes the following build error due to a typo introduced by commit e4ac92df27 ("serial: samsung: Neaten dbg uses"): drivers/tty/serial/samsung.c:69:26: error: ‘buf’ undeclared (first use in this function) Reported-by: Arun Kumar K Signed-off-by: Sachin Kamat Signed-off-by: Arnd Bergmann Signed-off-by: Christian Engelmayer Acked-by: Joe Perches Signed-off-by: Greg Kroah-Hartman

Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next

2014-06-04T22:59:13Z

Pull core irq updates from Thomas Gleixner: "The irq department delivers: - Another tree wide update to get rid of the horrible create_irq interface along with its even more horrible variants. That also gets rid of the last leftovers of the initial sparse irq hackery. arch/driver specific changes have been either acked or ignored. - A fix for the spurious interrupt detection logic with threaded interrupts. - A new ARM SoC interrupt controller - The usual pile of fixes and improvements all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) Documentation: brcmstb-l2: Add Broadcom STB Level-2 interrupt controller binding irqchip: brcmstb-l2: Add Broadcom Set Top Box Level-2 interrupt controller genirq: Improve documentation to match current implementation ARM: iop13xx: fix msi support with sparse IRQ genirq: Provide !SMP stub for irq_set_affinity_notifier() irqchip: armada-370-xp: Move the devicetree binding documentation irqchip: gic: Use mask field in GICC_IAR genirq: Remove dynamic_irq mess ia64: Use irq_init_desc genirq: Replace dynamic_irq_init/cleanup genirq: Remove irq_reserve_irq[s] genirq: Replace reserve_irqs in core code s390: Avoid call to irq_reserve_irqs() s390: Remove pointless arch_show_interrupts() s390: pci: Check return value of alloc_irq_desc() proper sh: intc: Remove pointless irq_reserve_irqs() invocation x86, irq: Remove pointless irq_reserve_irqs() call genirq: Make create/destroy_irq() ia64 private tile: Use SPARSE_IRQ tile: pci: Use irq_alloc/free_hwirq() ...

Merge tag 'devicetree-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux into next

2014-06-04T17:02:38Z

Pull DeviceTree updates from Rob Herring: - Another round of clean-up of FDT related code in architecture code. This removes knowledge of internal FDT details from most architectures except powerpc. - Conversion of kernel's custom FDT parsing code to use libfdt. - DT based initialization for generic serial earlycon. The introduction of generic serial earlycon support went in through the tty tree. - Improve the platform device naming for DT probed devices to ensure unique naming and use parent names instead of a global index. - Fix a race condition in of_update_property. - Unify the various linker section OF match tables and fix several function prototype errors. - Update platform_get_irq_byname to work in deferred probe cases. - 2 binding doc updates * tag 'devicetree-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (58 commits) of: handle NULL node in next_child iterators of/irq: provide more wrappers for !CONFIG_OF devicetree: bindings: Document micrel vendor prefix dt: bindings: dwc2: fix required value for the phy-names property of_pci_irq: kill useless variable in of_irq_parse_pci() of/irq: do irq resolution in platform_get_irq_byname() of: Add a testcase for of_find_node_by_path() of: Make of_find_node_by_path() handle /aliases of: Create unlocked version of for_each_child_of_node() lib: add glibc style strchrnul() variant of: Handle memory@0 node on PPC32 only pci/of: Remove dead code of: fix race between search and remove in of_update_property() of: Use NULL for pointers of: Stop naming platform_device using dcr address of: Ensure unique names without sacrificing determinism tty/serial: pl011: add DT based earlycon support of/fdt: add FDT serial scanning for earlycon of/fdt: add FDT address translation support serial: earlycon: add DT support ...