linux/drivers/tty/serial, branch v3.11

parisc: Fix interrupt routing for C8000 serial ports

2013-07-31T21:42:32Z

We can't use dev->mod_index for selecting the interrupt routing entry, because it's not an index into interrupt routing table. It will be even wrong on a machine with 2 CPUs (4 cores). But all needed information is contained in the PAT entries for the serial ports. mod[0] contains the iosapic address and mod_info has some indications for the interrupt input (at least it looks like it). This patch implements the searching for the right iosapic and uses this interrupt input information. Signed-off-by: Thomas Bogendoerfer Cc: # 3.10 Signed-off-by: Helge Deller

serial: arc_uart: Fix module alias

2013-07-26T23:34:00Z

Platform drivers use "platform:" prefix in module alias. Also use DRIVER_NAME in MODULE_ALIAS to make module autoloading work. Signed-off-by: Axel Lin Acked-by: Vineet Gupta Cc: stable Signed-off-by: Greg Kroah-Hartman

serial/mxs-auart: increase time to wait for transmitter to become idle

2013-07-26T23:34:00Z

Without this patch the driver waits ~1 ms for the UART to become idle. At 115200n8 this time is (theoretically) enough to transfer 11.5 characters (= 115200 bits/s / (10 Bits/char) * 1ms). As the mxs-auart has a fifo size of 16 characters the clock is gated too early. The problem is worse for lower baud rates. This only happens to really shut down the transmitter in the middle of a transfer if /dev/ttyAPPx isn't opened in userspace (e.g. by a getty) but was at least once (because the bootloader doesn't disable the transmitter). So increase the timeout to 20 ms which should be enough for 9600n8, too. Moreover skip gating the clock if the timeout is elapsed. Cc: stable@vger.kernel.org # v2.6.39+ Signed-off-by: Uwe Kleine-König Signed-off-by: Greg Kroah-Hartman

serial/mxs-auart: fix race condition in interrupt handler

2013-07-26T23:33:59Z

The handler needs to ack the pending events before actually handling them. Otherwise a new event might come in after it it considered non-pending or handled and is acked then without being handled. So this event is only noticed when the next interrupt happens. Without this patch an i.MX28 based machine running an rt-patched kernel regularly hangs during boot. Cc: stable@vger.kernel.org # v2.6.39+ Signed-off-by: Uwe Kleine-König Signed-off-by: Greg Kroah-Hartman

serial: tegra: correct help message in Kconfig from 'ttyHS' to 'ttyTHS'

2013-07-24T22:23:38Z

ttyTHS is consistent with the name used in driver. Signed-off-by: Richard Zhao Acked-by: Stephen Warren Signed-off-by: Greg Kroah-Hartman

tty/8250_early: Don't truncate last character of options

2013-07-24T22:23:38Z

The earlier change to use strlcpy uncovered a bug in the options argument length calculation causing last character to be truncated. This makes the actual console to be configured with incorrect baudrate when specifying the console using console=uart,... syntax. Bug symptom seen in kernel log output: Kernel command line: console=uart,mmio,0x90000000,115200 Early serial console at MMIO 0x90000000 (options '11520') which then results in a invalid baud rate 11520 instead of the expected 115200 when the console is switched to ttyS0 later in the boot process. Signed-off-by: Henrik Nordstrom Signed-off-by: Greg Kroah-Hartman

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

2013-07-13T21:52:21Z

Pull MIPS updates from Ralf Baechle: "MIPS updates: - All the things that didn't make 3.10. - Removes the Windriver PPMC platform. Nobody will miss it. - Remove a workaround from kernel/irq/irqdomain.c which was there exclusivly for MIPS. Patch by Grant Likely. - More small improvments for the SEAD 3 platform - Improvments on the BMIPS / SMP support for the BCM63xx series. - Various cleanups of dead leftovers. - Platform support for the Cavium Octeon-based EdgeRouter Lite. Two large KVM patchsets didn't make it for this pull request because their respective authors are vacationing" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (124 commits) MIPS: Kconfig: Add missing MODULES dependency to VPE_LOADER MIPS: BCM63xx: CLK: Add dummy clk_{set,round}_rate() functions MIPS: SEAD3: Disable L2 cache on SEAD-3. MIPS: BCM63xx: Enable second core SMP on BCM6328 if available MIPS: BCM63xx: Add SMP support to prom.c MIPS: define write{b,w,l,q}_relaxed MIPS: Expose missing pci_io{map,unmap} declarations MIPS: Malta: Update GCMP detection. Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET" MIPS: APSP: Remove SSB: Kconfig: Amend SSB_EMBEDDED dependencies MIPS: microMIPS: Fix improper definition of ISA exception bit. MIPS: Don't try to decode microMIPS branch instructions where they cannot exist. MIPS: Declare emulate_load_store_microMIPS as a static function. MIPS: Fix typos and cleanup comment MIPS: Cleanup indentation and whitespace MIPS: BMIPS: support booting from physical CPU other than 0 MIPS: Only set cpu_has_mmips if SYS_SUPPORTS_MICROMIPS MIPS: GIC: Fix gic_set_affinity infinite loop MIPS: Don't save/restore OCTEON wide multiplier state on syscalls. ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2013-07-04T18:40:58Z

Pull trivial tree updates from Jiri Kosina: "The usual stuff from trivial tree" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits) treewide: relase -> release Documentation/cgroups/memory.txt: fix stat file documentation sysctl/net.txt: delete reference to obsolete 2.4.x kernel spinlock_api_smp.h: fix preprocessor comments treewide: Fix typo in printk doc: device tree: clarify stuff in usage-model.txt. open firmware: "/aliasas" -> "/aliases" md: bcache: Fixed a typo with the word 'arithmetic' irq/generic-chip: fix a few kernel-doc entries frv: Convert use of typedef ctl_table to struct ctl_table sgi: xpc: Convert use of typedef ctl_table to struct ctl_table doc: clk: Fix incorrect wording Documentation/arm/IXP4xx fix a typo Documentation/networking/ieee802154 fix a typo Documentation/DocBook/media/v4l fix a typo Documentation/video4linux/si476x.txt fix a typo Documentation/virtual/kvm/api.txt fix a typo Documentation/early-userspace/README fix a typo Documentation/video4linux/soc-camera.txt fix a typo lguest: fix CONFIG_PAE -> CONFIG_x86_PAE in comment ...

Merge tag 'pm+acpi-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2013-07-03T21:35:40Z

Pull power management and ACPI updates from Rafael Wysocki: "This time the total number of ACPI commits is slightly greater than the number of cpufreq commits, but Viresh Kumar (who works on cpufreq) remains the most active patch submitter. To me, the most significant change is the addition of offline/online device operations to the driver core (with the Greg's blessing) and the related modifications of the ACPI core hotplug code. Next are the freezer updates from Colin Cross that should make the freezing of tasks a bit less heavy weight. We also have a couple of regression fixes, a number of fixes for issues that have not been identified as regressions, two new drivers and a bunch of cleanups all over. Highlights: - Hotplug changes to support graceful hot-removal failures. It sometimes is necessary to fail device hot-removal operations gracefully if they cannot be carried out completely. For example, if memory from a memory module being hot-removed has been allocated for the kernel's own use and cannot be moved elsewhere, it's desirable to fail the hot-removal operation in a graceful way rather than to crash the kernel, but currenty a success or a kernel crash are the only possible outcomes of an attempted memory hot-removal. Needless to say, that is not a very attractive alternative and it had to be addressed. However, in order to make it work for memory, I first had to make it work for CPUs and for this purpose I needed to modify the ACPI processor driver. It's been split into two parts, a resident one handling the low-level initialization/cleanup and a modular one playing the actual driver's role (but it binds to the CPU system device objects rather than to the ACPI device objects representing processors). That's been sort of like a live brain surgery on a patient who's riding a bike. So this is a little scary, but since we found and fixed a couple of regressions it caused to happen during the early linux-next testing (a month ago), nobody has complained. As a bonus we remove some duplicated ACPI hotplug code, because the ACPI-based CPU hotplug is now going to use the common ACPI hotplug code. - Lighter weight freezing of tasks. These changes from Colin Cross and Mandeep Singh Baines are targeted at making the freezing of tasks a bit less heavy weight operation. They reduce the number of tasks woken up every time during the freezing, by using the observation that the freezer simply doesn't need to wake up some of them and wait for them all to call refrigerator(). The time needed for the freezer to decide to report a failure is reduced too. Also reintroduced is the check causing a lockdep warining to trigger when try_to_freeze() is called with locks held (which is generally unsafe and shouldn't happen). - cpufreq updates First off, a commit from Srivatsa S Bhat fixes a resume regression introduced during the 3.10 cycle causing some cpufreq sysfs attributes to return wrong values to user space after resume. The fix is kind of fresh, but also it's pretty obvious once Srivatsa has identified the root cause. Second, we have a new freqdomain_cpus sysfs attribute for the acpi-cpufreq driver to provide information previously available via related_cpus. From Lan Tianyu. Finally, we fix a number of issues, mostly related to the CPUFREQ_POSTCHANGE notifier and cpufreq Kconfig options and clean up some code. The majority of changes from Viresh Kumar with bits from Jacob Shin, Heiko Stübner, Xiaoguang Chen, Ezequiel Garcia, Arnd Bergmann, and Tang Yuantian. - ACPICA update A usual bunch of updates from the ACPICA upstream. During the 3.4 cycle we introduced support for ACPI 5 extended sleep registers, but they are only supposed to be used if the HW-reduced mode bit is set in the FADT flags and the code attempted to use them without checking that bit. That caused suspend/resume regressions to happen on some systems. Fix from Lv Zheng causes those registers to be used only if the HW-reduced mode bit is set. Apart from this some other ACPICA bugs are fixed and code cleanups are made by Bob Moore, Tomasz Nowicki, Lv Zheng, Chao Guan, and Zhang Rui. - cpuidle updates New driver for Xilinx Zynq processors is added by Michal Simek. Multidriver support simplification, addition of some missing kerneldoc comments and Kconfig-related fixes come from Daniel Lezcano. - ACPI power management updates Changes to make suspend/resume work correctly in Xen guests from Konrad Rzeszutek Wilk, sparse warning fix from Fengguang Wu and cleanups and fixes of the ACPI device power state selection routine. - ACPI documentation updates Some previously missing pieces of ACPI documentation are added by Lv Zheng and Aaron Lu (hopefully, that will help people to uderstand how the ACPI subsystem works) and one outdated doc is updated by Hanjun Guo. - Assorted ACPI updates We finally nailed down the IA-64 issue that was the reason for reverting commit 9f29ab11ddbf ("ACPI / scan: do not match drivers against objects having scan handlers"), so we can fix it and move the ACPI scan handler check added to the ACPI video driver back to the core. A mechanism for adding CMOS RTC address space handlers is introduced by Lan Tianyu to allow some EC-related breakage to be fixed on some systems. A spec-compliant implementation of acpi_os_get_timer() is added by Mika Westerberg. The evaluation of _STA is added to do_acpi_find_child() to avoid situations in which a pointer to a disabled device object is returned instead of an enabled one with the same _ADR value. From Jeff Wu. Intel BayTrail PCH (Platform Controller Hub) support is added to the ACPI driver for Intel Low-Power Subsystems (LPSS) and that driver is modified to work around a couple of known BIOS issues. Changes from Mika Westerberg and Heikki Krogerus. The EC driver is fixed by Vasiliy Kulikov to use get_user() and put_user() instead of dereferencing user space pointers blindly. Code cleanups are made by Bjorn Helgaas, Nicholas Mazzuca and Toshi Kani. - Assorted power management updates The "runtime idle" helper routine is changed to take the return values of the callbacks executed by it into account and to call rpm_suspend() if they return 0, which allows us to reduce the overall code bloat a bit (by dropping some code that's not necessary any more after that modification). The runtime PM documentation is updated by Alan Stern (to reflect the "runtime idle" behavior change). New trace points for PM QoS are added by Sahara (). PM QoS documentation is updated by Lan Tianyu. Code cleanups are made and minor issues are addressed by Bernie Thompson, Bjorn Helgaas, Julius Werner, and Shuah Khan. - devfreq updates New driver for the Exynos5-bus device from Abhilash Kesavan. Minor cleanups, fixes and MAINTAINERS update from MyungJoo Ham, Abhilash Kesavan, Paul Bolle, Rajagopal Venkat, and Wei Yongjun. - OMAP power management updates Adaptive Voltage Scaling (AVS) SmartReflex voltage control driver updates from Andrii Tseglytskyi and Nishanth Menon." * tag 'pm+acpi-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (162 commits) cpufreq: Fix cpufreq regression after suspend/resume ACPI / PM: Fix possible NULL pointer deref in acpi_pm_device_sleep_state() PM / Sleep: Warn about system time after resume with pm_trace cpufreq: don't leave stale policy pointer in cdbs->cur_policy acpi-cpufreq: Add new sysfs attribute freqdomain_cpus cpufreq: make sure frequency transitions are serialized ACPI: implement acpi_os_get_timer() according the spec ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scan ACPI: Add CMOS RTC Operation Region handler support ACPI / processor: Drop unused variable from processor_perflib.c cpufreq: tegra: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: s3c64xx: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: omap: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: imx6q: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: exynos: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: dbx500: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: davinci: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: arm-big-little: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: powernow-k8: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: pcc: call CPUFREQ_POSTCHANGE notfier in error cases ...

Merge tag 'pinctrl-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2013-07-03T18:48:03Z

Pull pin control changes from Linus Walleij: - A large slew of improvements of the Genric pin configuration support, and deployment in four different platforms: Rockchip, Super-H PFC, ABx500 and TZ1090. Support BIAS_BUS_HOLD, get device tree parsing and debugfs support into shape. - We also have device tree support with generic naming conventions for the generic pin configuration. - Delete the unused and confusing direct pinconf API. Now state transitions is *the* way to control pins and multiplexing. - New drivers for Rockchip, TZ1090, and TZ1090 PDC. - Two pin control states related to power management are now handled in the device core: "sleep" and "idle", removing a lot of boilerplate code in drivers. We do not yet know if this is the final word for pin PM, but it already make things a lot easier to handle. - Handle sparse GPIO ranges passing a list of disparate pins, and utilize these in the new BayTrail (x86 Atom SoC) driver. - Make the sunxi (AllWinner) driver handle external interrupts. - Make it possible for pinctrl-single to handle the case where several pins are managed by a single register, and augment it to handle sleep modes. - Cleanups and improvements for the abx500 drivers. - Move Sirf pin control drivers to their own directory, support save/restore of context and add support for the SiRFatlas6 SoC. - PMU muxing for the Dove pinctrl driver. - Finalization and support for VF610 in the i.MX6 pinctrl driver. - Smoothen out various Exynos rough edges. - Generic cleanups of various kinds. * tag 'pinctrl-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits) pinctrl: vt8500: wmt: remove redundant dev_err call in wmt_pinctrl_probe() pinctrl: remove bindings for pinconf options needing more thought pinctrl: remove slew-rate parameter from tz1090 pinctrl: set unit for debounce time pinconfig to usec pinctrl: more clarifications for generic pull configs pinctrl: rip out the direct pinconf API pinctrl-tz1090-pdc: add TZ1090 PDC pinctrl driver pinctrl-tz1090: add TZ1090 pinctrl driver pinctrl: samsung: Staticize drvdata_list pinctrl: rockchip: Add missing irq_gc_unlock() call before return error pinctrl: abx500: rework error path pinctrl: abx500: suppress hardcoded value pinctrl: abx500: factorize code pinctrl: abx500: fix abx500_gpio_get() pinctrl: abx500: fix abx500_pin_config_set() pinctrl: abx500: Add device tree support sh-pfc: Guard DT parsing with #ifdef CONFIG_OF pinctrl: add Intel BayTrail GPIO/pinctrl support pinctrl: fix pinconf_ops::pin_config_dbg_parse_modify kerneldoc pinctrl: Staticize local symbols ... Conflicts: drivers/net/ethernet/ti/davinci_mdio.c drivers/pinctrl/Makefile