linux/drivers/target/loopback, branch v3.16

tcm_loop: Fix memory leak in tcm_loop_submission_work error path

2014-06-27T03:56:49Z

This patch fixes a tcm_loop_cmd descriptor memory leak in the tcm_loop_submission_work() error path, and would result in warnings about leaked tcm_loop_cmd_cache objects at module unload time. Go ahead and invoke kmem_cache_free() to release tl_cmd back to tcm_loop_cmd_cache before calling sc->scsi_done(). Reported-by: Sebastian Herbszt Tested-by: Sebastian Herbszt Signed-off-by: Nicholas Bellinger

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

2014-06-13T05:38:32Z

Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - Add support for T10 PI pass-through between vhost-scsi + virtio-scsi (MST + Paolo + MKP + nab) - Add support for T10 PI in qla2xxx target mode (Quinn + MKP + hch + nab, merged through scsi.git) - Add support for percpu-ida pre-allocation in qla2xxx target code (Quinn + nab) - A number of iser-target fixes related to hardening the network portal shutdown path (Sagi + Slava) - Fix response length residual handling for a number of control CDBs (Roland + Christophe V.) - Various iscsi RFC conformance fixes in the CHAP authentication path (Tejas and Calsoft folks + nab) - Return TASK_SET_FULL status for tcm_fc(FCoE) DataIn + Response failures (Vasu + Jun + nab) - Fix long-standing ABORT_TASK + session reset hang (nab) - Convert iser-initiator + iser-target to include T10 bytes into EDTL (Sagi + Or + MKP + Mike Christie) - Fix NULL pointer dereference regression related to XCOPY introduced in v3.15 + CC'ed to v3.12.y (nab)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (34 commits) target: Fix NULL pointer dereference for XCOPY in target_put_sess_cmd vhost-scsi: Include prot_bytes into expected data transfer length TARGET/sbc,loopback: Adjust command data length in case pi exists on the wire libiscsi, iser: Adjust data_length to include protection information scsi_cmnd: Introduce scsi_transfer_length helper target: Report correct response length for some commands target/sbc: Check that the LBA and number of blocks are correct in VERIFY target/sbc: Remove sbc_check_valid_sectors() Target/iscsi: Fix sendtargets response pdu for iser transport Target/iser: Fix a wrong dereference in case discovery session is over iser iscsi-target: Fix ABORT_TASK + connection reset iscsi_queue_req memory leak target: Use complete_all for se_cmd->t_transport_stop_comp target: Set CMD_T_ACTIVE bit for Task Management Requests target: cleanup some boolean tests target/spc: Simplify INQUIRY EVPD=0x80 tcm_fc: Generate TASK_SET_FULL status for response failures tcm_fc: Generate TASK_SET_FULL status for DataIN failures iscsi-target: Reject mutual authentication with reflected CHAP_C iscsi-target: Remove no-op from iscsit_tpg_del_portal_group iscsi-target: Fix CHAP_A parameter list handling ...

TARGET/sbc,loopback: Adjust command data length in case pi exists on the wire

2014-06-11T20:06:50Z

In various areas of the code, it is assumed that se_cmd->data_length describes pure data. In case that protection information exists over the wire (protect bits is are on) the target core re-calculates the data length from the CDB and the backed device block size (instead of each transport peeking in the cdb). Modify loopback device to include protection information in the transferred data length (like other scsi transports). Signed-off-by: Sagi Grimberg Cc: stable@vger.kernel.org # 3.15+ Signed-off-by: Nicholas Bellinger

arch: Mass conversion of smp_mb__*()

2014-04-18T12:20:48Z

Mostly scripted conversion of the smp_mb__* barriers. Signed-off-by: Peter Zijlstra Acked-by: Paul E. McKenney Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org Cc: Linus Torvalds Cc: linux-arch@vger.kernel.org Signed-off-by: Ingo Molnar

target: Pass in transport supported PI at session initialization

2014-04-07T08:48:54Z

In order to support local WRITE_INSERT + READ_STRIP operations for non PI enabled fabrics, the fabric driver needs to be able signal what protection offload operations are supported. This is done at session initialization time so the modes can be signaled by individual se_wwn + se_portal_group endpoints, as well as optionally across different transports on the same endpoint. For iser-target, set TARGET_PROT_ALL if the underlying ib_device has already signaled PI offload support, and allow this to be exposed via a new iscsit_transport->iscsit_get_sup_prot_ops() callback. For loopback, set TARGET_PROT_ALL to signal SCSI initiator mode operation. For all other drivers, set TARGET_PROT_NORMAL to disable fabric level PI. Cc: Martin K. Petersen Cc: Sagi Grimberg Cc: Or Gerlitz Cc: Quinn Tran Cc: Giridhar Malavali Signed-off-by: Nicholas Bellinger

target: Add TFO->abort_task for aborted task resources release

2014-04-07T08:48:51Z

Now that TASK_ABORTED status is not generated for all cases by TMR ABORT_TASK + LUN_RESET, a new TFO->abort_task() caller is necessary in order to give fabric drivers a chance to unmap hardware / software resources before the se_cmd descriptor is released via the normal TFO->release_cmd() codepath. This patch adds TFO->aborted_task() in core_tmr_abort_task() in place of the original transport_send_task_abort(), and also updates all fabric drivers to implement this caller. The fabric drivers that include changes to perform cleanup via ->aborted_task() are: - iscsi-target - iser-target - srpt - tcm_qla2xxx The fabric drivers that currently set ->aborted_task() to NOPs are: - loopback - tcm_fc - usb-gadget - sbp-target - vhost-scsi For the latter five, there appears to be no additional cleanup required before invoking TFO->release_cmd() to release the se_cmd descriptor. v2 changes: - Move ->aborted_task() call into transport_cmd_finish_abort (Alex) Cc: Alex Leung Cc: Mark Rustad Cc: Roland Dreier Cc: Vu Pham Cc: Chris Boot Cc: Sebastian Andrzej Siewior Cc: Michael S. Tsirkin Cc: Giridhar Malavali Cc: Saurav Kashyap Cc: Quinn Tran Cc: Sagi Grimberg Cc: Or Gerlitz Signed-off-by: Nicholas Bellinger

Target/dif: Introduce protection-passthough-only mode

2014-04-07T08:48:42Z

Some transports (iSCSI/iSER/SRP/FC) support hardware INSERT/STRIP capabilities while other transports like loopback/vhost-scsi need perform this is software. This patch allows fabrics using SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC to signal the early LUN scan handling case where PROTECT CDB bits are set, but no fabric buffer has been provided. For transports which use generic new command these buffers have yet to be allocated. Also this way, target may support protection information against legacy initiators (writes are inserted and reads are stripped). (Only set prot_pto for loopback during early special case - nab) Signed-off-by: Sagi Grimberg Signed-off-by: Nicholas Bellinger

tcm_loop: Enable DIF/DIX modes in SCSI host LLD

2014-01-19T02:22:06Z

This patch updates tcm_loop_driver_probe() to set protection information using scsi_host_set_prot() and scsi_host_set_guard(), which currently enabled all modes of DIF/DIX protection, minus DIX TYPE0. Also, update tcm_loop_submission_work() to pass struct scsi_cmnd related protection into target_submit_cmd_map_sgls() during CDB dispatch. Reviewed-by: Martin K. Petersen Cc: Christoph Hellwig Cc: Hannes Reinecke Cc: Sagi Grimberg Cc: Or Gerlitz Signed-off-by: Nicholas Bellinger

target: Add protection SGLs to target_submit_cmd_map_sgls

2014-01-18T09:58:09Z

This patch adds support to target_submit_cmd_map_sgls() for accepting 'sgl_prot' + 'sgl_prot_count' parameters for DIF protection information. Note the passed parameters are stored at se_cmd->t_prot_sg and se_cmd->t_prot_nents respectively. Also, update tcm_loop and vhost-scsi fabrics usage of target_submit_cmd_map_sgls() to take into account the new parameters. Cc: Martin K. Petersen Cc: Christoph Hellwig Cc: Hannes Reinecke Cc: Sagi Grimberg Cc: Or Gerlitz Signed-off-by: Nicholas Bellinger

drivers: target: Mark functions as static in tcm_loop.c

2014-01-10T05:48:37Z

Mark functions tcm_loop_make_naa_tpg(), tcm_loop_drop_naa_tpg(), tcm_loop_make_scsi_hba() and tcm_loop_drop_scsi_hba() as static in loopback/tcm_loop.c because they are not used outside this file. This eliminates the following warning in loopback/tcm_loop.c: drivers/target/loopback/tcm_loop.c:1231:25: warning: no previous prototype for ‘tcm_loop_make_naa_tpg’ [-Wmissing-prototypes] drivers/target/loopback/tcm_loop.c:1276:6: warning: no previous prototype for ‘tcm_loop_drop_naa_tpg’ [-Wmissing-prototypes] drivers/target/loopback/tcm_loop.c:1308:16: warning: no previous prototype for ‘tcm_loop_make_scsi_hba’ [-Wmissing-prototypes] drivers/target/loopback/tcm_loop.c:1378:6: warning: no previous prototype for ‘tcm_loop_drop_scsi_hba’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria Reviewed-by: Josh Triplett Signed-off-by: Nicholas Bellinger