linux/drivers/spi, branch v3.6

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

2012-08-25T18:45:04Z

Pull MIPS fixes from Ralf Baechle: "Random fixes across the MIPS tree. The two hotspots are several bugs in the module loader and the ath79 SOC support; also noteworthy is the restructuring of the code to synchronize CPU timers across CPUs on startup; the old code recently ceased to work due to unrelated changes. All except one of these patches have sat for a significant time in linux-next for testing." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: pci-ar724x: avoid data bus error due to a missing PCIe module MIPS: Malta: Delete duplicate PCI fixup. MIPS: ath79: don't hardcode the unavailability of the DSP ASE MIPS: Synchronize MIPS count one CPU at a time MIPS: BCM63xx: Fix SPI message control register handling for BCM6338/6348. MIPS: Module: Deal with malformed HI16/LO16 relocation sequences. MIPS: Fix race condition in module relocation code. MIPS: Fix memory leak in error path of HI16/LO16 relocation handling. MIPS: MTX-1: Add udelay to mtx1_pci_idsel MIPS: ath79: select HAVE_CLK MIPS: ath79: Use correct IRQ number for the OHCI controller on AR7240 MIPS: ath79: Fix number of GPIO lines for AR724[12] MIPS: Octeon: Fix broken interrupt controller code.

Merge tag 'spi-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc

2012-08-20T20:05:27Z

Pull spi fixes from Mark Brown: "Grant is still away so another pull request with some fairly minor fixes, the most notable of which are several fixes for some common error patterns with the reference counting spi_master_get/put do." * tag 'spi-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: spi/coldfire-qspi: Drop extra calls to spi_master_get in suspend/resume functions spi: spi-coldfire-qspi: Drop extra spi_master_put in device remove function spi/pl022: fix spi-pl022 pm enable at probe spi/bcm63xx: Ensure that memory is freed only after it is no longer used spi: omap2-mcspi: Fix the error handling in probe spi/s3c64xx: Add missing static storage class specifiers

spi/coldfire-qspi: Drop extra calls to spi_master_get in suspend/resume functions

2012-08-17T21:46:41Z

Suspend and resume functions call spi_master_get() without matching spi_master_put(). The extra references are unnecessary and cause subsequent module unload attempts to fail, so drop the calls. Signed-off-by: Guenter Roeck Signed-off-by: Mark Brown

spi: spi-coldfire-qspi: Drop extra spi_master_put in device remove function

2012-08-17T21:46:41Z

The call sequence spi_alloc_master/spi_register_master/spi_unregister_master is complete; it reduces the device reference count to zero, which and results in device memory being freed. The subsequent call to spi_master_put is unnecessary and results in an access to free memory. Drop it. Signed-off-by: Guenter Roeck Signed-off-by: Mark Brown

spi/pl022: fix spi-pl022 pm enable at probe

2012-08-17T21:46:41Z

amba drivers does not need to enable pm runtime at probe. amba_probe already enables pm runtime. This rids this warning in the ux500 boot log: ssp-pl022 ssp0: Unbalanced pm_runtime_enable! Signed-off-by: Michel JAOUEN Signed-off-by: Linus Walleij Signed-off-by: Mark Brown

MIPS: BCM63xx: Fix SPI message control register handling for BCM6338/6348.

2012-08-17T08:57:28Z

BCM6338 and BCM6348 have a message control register width of 8 bits, instead of 16-bits like what the SPI driver assumes right now. Also the SPI message type shift value of 14 is actually 6 for these SoCs. This resulted in transmit FIFO corruption because we were writing 16-bits to an 8-bits wide register, thus spanning on the first byte of the transmit FIFO, which had already been filed in bcm63xx_spi_fill_txrx_fifo(). Fix this by passing the message control register width and message type shift through platform data back to the SPI driver so that it can use it properly. Signed-off-by: Florian Fainelli Cc: linux-mips@linux-mips.org Cc: grant.likely@secretlab.ca Cc: spi-devel-general@lists.sourceforge.net Cc: jonas.gorski@gmail.com Patchwork: https://patchwork.linux-mips.org/patch/3983/ Signed-off-by: Ralf Baechle

spi/bcm63xx: Ensure that memory is freed only after it is no longer used

2012-08-13T12:29:20Z

The call to spi_unregister_master() in the device remove function frees device memory, and with it any device local data. However, device local data is still accessed after the call to spi_unregister_master(). Acquire a reference to the SPI device and release it after cleanup is complete to solve the problem. Signed-off-by: Guenter Roeck Signed-off-by: Mark Brown

spi/s3c64xx: improve error handling

2012-08-10T10:27:47Z

When a device tree definition os an s3c64xx SPI master is missing a "controller-data" subnode, the newly added s3c64xx_get_slave_ctrldata function might use uninitialized memory in place of that node, which was correctly reported by gcc. Without this patch, building s3c6400_defconfig results in: drivers/spi/spi-s3c64xx.c: In function 's3c64xx_get_slave_ctrldata.isra.25': drivers/spi/spi-s3c64xx.c:841:5: warning: 'data_np' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Arnd Bergmann Acked-by: Thomas Abraham Acked-by: Kukjin Kim Cc: Jaswinder Singh Cc: Grant Likely

spi: omap2-mcspi: Fix the error handling in probe

2012-08-04T11:06:47Z

The kfree() is taken care of by the spi core (spi_master_release() function) that is called once the last reference to the underlying struct device has been released. So the driver need not call kfree. Also the put was missed in some of the error handling fix the same. There by fixing the missing device_put in some of the error paths. Acked-by: Guenter Roeck Reported-by: Guenter Roeck Signed-off-by: Shubhrajyoti D Signed-off-by: Mark Brown

spi/s3c64xx: Add missing static storage class specifiers

2012-08-04T11:06:47Z

Silences the following sparse warnings: drivers/spi/spi-s3c64xx.c:1482:32: warning: symbol 's3c2443_spi_port_config' was not declared. Should it be static? drivers/spi/spi-s3c64xx.c:1489:32: warning: symbol 's3c6410_spi_port_config' was not declared. Should it be static? drivers/spi/spi-s3c64xx.c:1495:32: warning: symbol 's5p64x0_spi_port_config' was not declared. Should it be static? drivers/spi/spi-s3c64xx.c:1501:32: warning: symbol 's5pc100_spi_port_config' was not declared. Should it be static? drivers/spi/spi-s3c64xx.c:1508:32: warning: symbol 's5pv210_spi_port_config' was not declared. Should it be static? drivers/spi/spi-s3c64xx.c:1515:32: warning: symbol 'exynos4_spi_port_config' was not declared. Should it be static? Signed-off-by: Sachin Kamat Signed-off-by: Mark Brown