linux/drivers/serial/serial_core.c, branch v2.6.19

Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-serial

2006-10-03T16:13:29Z

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-serial: (21 commits) [SERIAL] add PNP IDs for FPI based touchscreens [SERIAL] Magic SysRq SAK does nothing on serial consoles [SERIAL] tickle NMI watchdog on serial output. [SERIAL] Fix oops when removing suspended serial port [SERIAL] Fix resume handling bug [SERIAL] Remove wrong asm/serial.h inclusions [SERIAL] CONFIG_PM=n slim: drivers/serial/8250_pci.c [SERIAL] OMAP1510 serial fix for 115200 baud [SERIAL] returning proper error from serial core driver [SERIAL] Make uart_line_info() correctly tell MMIO from I/O port [SERIAL] suspend/resume handlers don't have level arg anymore [SERIAL] 8250 resourse management fixes [SERIAL] serial_cs: Add quirk for brainboxes 2-port RS232 card [SERIAL] serial_cs: handle Nokia multi->single port bodge via config quirk [SERIAL] serial_cs: add configuration quirk [SERIAL] serial_cs: Convert Oxford 950 / Possio GCC wakeup quirk [SERIAL] serial_cs: convert IBM post-init handling to a quirk [SERIAL] serial_cs: allow wildcarded quirks [SERIAL] serial_cs: convert multi-port table to quirk table [SERIAL] serial_cs: Use clean up multiport card detection ...

[PATCH] const struct tty_operations

2006-10-02T14:57:14Z

As part of an SMP cleanliness pass over UML, I consted a bunch of structures in order to not have to document their locking. One of these structures was a struct tty_operations. In order to const it in UML without introducing compiler complaints, the declaration of tty_set_operations needs to be changed, and then all of its callers need to be fixed. This patch declares all struct tty_operations in the tree as const. In all cases, they are static and used only as input to tty_set_operations. As an extra check, I ran an i386 allyesconfig build which produced no extra warnings. 53 drivers are affected. I checked the history of a bunch of them, and in most cases, there have been only a handful of maintenance changes in the last six months. serial_core.c was the busiest one that I looked at. Signed-off-by: Jeff Dike Acked-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[SERIAL] Fix oops when removing suspended serial port

2006-10-01T16:17:40Z

A serial card might have been removed when the system is resumed. This results in a suspended port being shut down, which results in the ports shutdown method being called twice in a row. This causes BUGs. Avoid this by tracking the suspended state separately from the initialised state. Signed-off-by: Russell King

[SERIAL] returning proper error from serial core driver

2006-10-01T16:07:00Z

Fix the issue of returning 0 even in case of error from uart_set_info function. Now it returns the error EBUSY when it can not set new port. Signed-off-by: Ram Gupta Signed-off-by: Andrew Morton Signed-off-by: Russell King

[SERIAL] Make uart_line_info() correctly tell MMIO from I/O port

2006-10-01T16:06:57Z

/proc/tty/driver/serial incorrectly claims that UARTs having iotype of UPIO_MEM32, UPIO_AU, or UPIO_TSI are I/O mapped. Signed-off-by: Sergei Shtylyov Signed-off-by: Russell King

[PATCH] suspend: make it possible to disable serial console suspend

2006-09-26T15:49:03Z

Hack uart_suspend_port() and uart_resume_port() so that serial console ports are not suspended if CONFIG_DISABLE_CONSOLE_SUSPEND is set. This makes it possible to debug the suspend and resume routines of all device drivers as well as the lowest-level swsusp code with the help of the serial console. Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[SERIAL] Make uart_match_port() work with all memory mapped UARTs

2006-08-30T09:06:14Z

uart_match_port() always fails with UPIO_MEM32, UPIO_AU, and UPIO_TSI cases. Since they match to the memory mapped UARTs, they should be handled just like UPIO_MEM case. Signed-off-by: Sergei Shtylyov Signed-off-by: Russell King

[SERIAL] 8250: add tsi108 serial support

2006-07-09T20:11:09Z

The following patch gets rid of CONFIG_TSI108_BRIDGE. I add UPIO_TSI to handle IIR and IER register in serial_in and serial_out. (1) the reason to rewrite serial_in: TSI108 rev Z1 version ERRATA. Reading the UART's Interrupt Identification Register (IIR) clears the Transmit Holding Register Empty (THRE) and Transmit buffer Empty (TEMP) interrupts even if they are not enabled in the Interrupt Enable Register (IER). This leads to loss of the interrupts. Interrupts are not cleared when reading UART registers as 32-bit word. (2) the reason to rewrite serial_out: Check for UART_IER_UUE bit in the autoconfig routine. This section of autoconfig is excluded for Tsi108/109 because bits 7 and 6 are reserved for internal use. They are R/W bits. In addition to incorrect identification, changing these bits (from 00) will make Tsi108/109 UART non-functional. Signed-off-by: Roy Zang Signed-off-by: Andrew Morton Signed-off-by: Russell King

Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-serial

2006-07-04T04:31:05Z

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] Ensure 8250_pci quirks are not marked __devinit [SERIAL] Convert fifosize to an unsigned int

[PATCH] lockdep: annotate serial

2006-07-03T22:27:06Z

Teach special (dual-initialized) locking code to the lock validator. Has no effect on non-lockdep kernels. Signed-off-by: Ingo Molnar Signed-off-by: Arjan van de Ven Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds