linux/drivers/rtc, branch v3.1.8

Revert "rtc: Disable the alarm in the hardware"

2012-01-06T22:17:34Z

commit 157e8bf8b4823bfcdefa6c1548002374b61f61df upstream. This reverts commit c0afabd3d553c521e003779c127143ffde55a16f. It causes failures on Toshiba laptops - instead of disabling the alarm, it actually seems to enable it on the affected laptops, resulting in (for example) the laptop powering on automatically five minutes after shutdown. There's a patch for it that appears to work for at least some people, but it's too late to play around with this, so revert for now and try again in the next merge window. See for example http://bugs.debian.org/652869 Reported-and-bisected-by: Andreas Friedrich (Toshiba Tecra) Reported-by: Antonio-M. Corbi Bellot (Toshiba Portege R500) Reported-by: Marco Santos (Toshiba Portege Z830) Reported-by: Christophe Vu-Brugier (Toshiba Portege R830) Cc: Jonathan Nieder Requested-by: John Stultz Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

rtc: m41t80: Workaround broken alarm functionality

2012-01-06T22:16:49Z

commit c3b79770e51ab1fd4201f3b54edf30113b9ce74f upstream. The m41t80 driver can read and set the alarm, but it doesn't seem to have a functional alarm irq. This causes failures when the generic core sees alarm functions, but then cannot use them properly for things like UIE mode. Disabling the alarm functions allows proper error reporting, and possible fallback to emulated modes. Once someone fixes the alarm irq functionality, this can be restored. CC: Matt Turner CC: Nico Macrionitis CC: Atsushi Nemoto Reported-by: Matt Turner Reported-by: Nico Macrionitis Tested-by: Nico Macrionitis Signed-off-by: John Stultz Signed-off-by: Greg Kroah-Hartman

drivers/rtc/rtc-s3c.c: fix driver clock enable/disable balance issues

2011-12-21T20:58:21Z

commit 2dbcd05f1e9e0932833d16dab1696176fc164b07 upstream. If an error occurs after the clock is enabled, the enable/disable state can become unbalanced. Signed-off-by: Jonghwan Choi Cc: Alessandro Zummo Acked-by: Kukjin Kim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

rtc: Fix some bugs that allowed accumulating time drift in suspend/resume

2011-12-09T16:55:51Z

commit 6a8943d9ec2567572fca25cf69ad45844d0141a3 upstream. The current code checks if abs(delta_delta.tv_sec) is greater or equal to two before it discards the old delta value, but this can trigger at close to -1 seconds since -1.000000001 seconds is stored as tv_sec -2 and tv_nsec 999999999 in a normalized timespec. rtc_resume had an early return check if the rtc value had not changed since rtc_suspend. This effectivly stops time for the duration of the short sleep. Check if sleep_time is positive after all the adjustments have been applied instead since this allows the old_system adjustment in rtc_suspend to have an effect even for short sleep cycles. Signed-off-by: Arve Hjønnevåg Signed-off-by: John Stultz Signed-off-by: Greg Kroah-Hartman

rtc: Disable the alarm in the hardware

2011-12-09T16:55:51Z

commit c0afabd3d553c521e003779c127143ffde55a16f upstream. Currently, the RTC code does not disable the alarm in the hardware. This means that after a sequence such as the one below (the files are in the RTC sysfs), the box will boot up after 2 minutes even though we've asked for the alarm to be turned off. # echo $((`cat since_epoch`)+120) > wakealarm # echo 0 > wakealarm # poweroff Fix this by disabling the alarm when there are no timers to run. Cc: John Stultz Signed-off-by: Rabin Vincent Signed-off-by: John Stultz Signed-off-by: Greg Kroah-Hartman

drivers/rtc/rtc-s3c.c: fix no occurrence of alarm interrupt

2011-09-15T01:09:38Z

The driver does not generate an alarm interrupt even though a time for an alarm is set. This results from disabling rtc_clk after setting the alarm time. To generate an alarm interrupt the driver should maintain its enabled state for rtc_clk the until alarm interrupt occurs. This patch permits generation of an alarm interrupt. [akpm@linux-foundation.org: make s3c_rtc_alarm_clk_lock local to s3c_rtc_alarm_clk_enable()] Signed-off-by: Donggeun Kim Signed-off-by: MyungJoo Ham Signed-off-by: Kyungmin Park Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

drivers/rtc/rtc-imxdi.c needs linux/sched.h

2011-09-15T01:09:37Z

Include linux/sched.h to fix below build error. CC drivers/rtc/rtc-imxdi.o drivers/rtc/rtc-imxdi.c: In function 'di_write_wait': drivers/rtc/rtc-imxdi.c:168: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function) drivers/rtc/rtc-imxdi.c:168: error: (Each undeclared identifier is reported only once drivers/rtc/rtc-imxdi.c:168: error: for each function it appears in.) drivers/rtc/rtc-imxdi.c:168: error: implicit declaration of function 'signal_pending' drivers/rtc/rtc-imxdi.c:168: error: implicit declaration of function 'schedule_timeout' drivers/rtc/rtc-imxdi.c: In function 'dryice_norm_irq': drivers/rtc/rtc-imxdi.c:329: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function) Signed-off-by: Axel Lin Cc: Baruch Siach Cc: Wan ZongShun Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge branch 'timers-fixes-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip

2011-09-07T20:03:48Z

* 'timers-fixes-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip: rtc: twl: Fix registration vs. init order rtc: Initialized rtc_time->tm_isdst rtc: Fix RTC PIE frequency limit rtc: rtc-twl: Remove lockdep related local_irq_enable() rtc: rtc-twl: Switch to using threaded irq rtc: ep93xx: Fix 'rtc' may be used uninitialized warning alarmtimers: Avoid possible denial of service with high freq periodic timers alarmtimers: Memset itimerspec passed into alarm_timer_get alarmtimers: Avoid possible null pointer traversal

rtc: twl: Fix registration vs. init order

2011-08-27T00:26:54Z

Only register as an RTC device after the hardware has been successfully initialized. The RTC class driver will call back to this driver to read a pending alarm, and other drivers watching for new devices on the RTC class may read the RTC time upon registration. Such access might occur while the RTC is stopped, prior to clearing pending alarms, etc. The new ordering also avoids leaving the platform device drvdata set to an unregistered struct rtc_device * on probe errors. Signed-off-by: Todd Poynor Signed-off-by: John Stultz

rtc: Initialized rtc_time->tm_isdst

2011-08-27T00:26:35Z

Even though the Linux kernel does not use the tm_isdst field, it is exposed as part of the ABI. This field can accidentally be left initialized, which is why we currently memset buffers returned to userland in rtc_read_time. There is a case however where the field can return garbage from the stack though when using the RTC_ALM_READ ioctl on the rtc device. This ioctl invokes rtc_read_alarm, which is careful to memset the rtc_wkalrm buffer that is copied to userland, but it then uses a struct copy to assign to alarm->time given the return value from rtc_ktime_to_tm(). rtc_ktime_to_tm() is implemented by calling rtc_time_to_tm using a derivative seconds counds from ktime, but rtc_time_to_tm does not assign a value to ->tm_isdst. This results in garbage from rtc_ktime_to_tm()'s frame ending up being copied out to userland as part of the returned rtc_wkalrm. Fix this by initializing rtc_time->tm_isdst to 0 in rtc_time_to_tm. Signed-off-by: Mike Waychison Signed-off-by: John Stultz