linux/drivers/rtc/Makefile, branch v3.12.10

rtc: add MOXA ART RTC driver

2013-09-11T22:58:54Z

Add RTC driver for MOXA ART SoCs. Signed-off-by: Jonas Jensen Reviewed-by: Mark Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

drivers/rtc/rtc-sirfsoc.c: add rtc drivers for CSR SiRFprimaII and SiRFatlasVI

2013-07-03T23:08:01Z

On CSR SiRFprimaII/atlasVI, there is a programmable 16-bit divider (RTC_DIV) that divides the input 32.768KHz clock to the frequency that users need (E.g. 1 Hz). The divided real-time clock will be used to drive a 32-bit counter (RTC_COUNTER) that provides users with the actual time. In each cycle of the divided real-time clock, there is a Hertz interrupt generated to the RISC. Users can also configure an alarm (RTC_ALARM). When RTC_COUNTER matches the alarm, there will be an alarm interrupt generated to the RISC. The system RTC can generate an alarm wake-up signal to notify the power controller to wake up from power saving mode. Signed-off-by: Xianglong Du Signed-off-by: Barry Song Cc: Jingoo Han Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

rtc: add NXP PCF2127 support (i2c)

2013-07-03T23:08:00Z

Added support for NXP PCF2127 RTC (i2c). [akpm@linux-foundation.org: fix typo, fix warnings] Signed-off-by: Renaud Cerrato Cc: Jingoo Han Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'mfd-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

2013-02-25T04:00:58Z

Pull MFS updates from Samuel Ortiz: "This is the MFD pull request for the 3.9 merge window. No new drivers this time, but a bunch of fairly big cleanups: - Roger Quadros worked on a OMAP USBHS and TLL platform data consolidation, OMAP5 support and clock management code cleanup. - The first step of a major sync for the ab8500 driver from Lee Jones. In particular, the debugfs and the sysct interfaces got extended and improved. - Peter Ujfalusi sent a nice patchset for cleaning and fixing the twl-core driver, with a much needed module id lookup code improvement. - The regular wm5102 and arizona cleanups and fixes from Mark Brown. - Laxman Dewangan extended the palmas APIs in order to implement the palmas GPIO and rt drivers. - Laxman also added DT support for the tps65090 driver. - The Intel SCH and ICH drivers got a couple fixes from Aaron Sierra and Darren Hart. - Linus Walleij patchset for the ab8500 driver allowed ab8500 and ab9540 based devices to switch to the new abx500 pin-ctrl driver. - The max8925 now has device tree and irqdomain support thanks to Qing Xu. - The recently added rtsx driver got a few cleanups and fixes for a better card detection code path and now also supports the RTS5227 chipset, thanks to Wei Wang and Roger Tseng." * tag 'mfd-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (109 commits) mfd: lpc_ich: Use devres API to allocate private data mfd: lpc_ich: Add Device IDs for Intel Wellsburg PCH mfd: lpc_sch: Accomodate partial population of the MFD devices mfd: da9052-i2c: Staticize da9052_i2c_fix() mfd: syscon: Fix sparse warning mfd: twl-core: Fix kernel panic on boot mfd: rtsx: Fix issue that booting OS with SD card inserted mfd: ab8500: Fix compile error mfd: Add missing GENERIC_HARDIRQS dependecies Documentation: Add docs for max8925 dt mfd: max8925: Add dts mfd: max8925: Support dt for backlight mfd: max8925: Fix onkey driver irq base mfd: max8925: Fix mfd device register failure mfd: max8925: Add irqdomain for dt mfd: vexpress: Allow vexpress-sysreg to self-initialise mfd: rtsx: Support RTS5227 mfd: rtsx: Implement driving adjustment to device-dependent callbacks mfd: vexpress: Add pseudo-GPIO based LEDs mfd: ab8500: Rename ab8500 to abx500 for hwmon driver ...

Merge branch 'akpm' (incoming from Andrew)

2013-02-22T01:38:49Z

Merge misc patches from Andrew Morton: - Florian has vanished so I appear to have become fbdev maintainer again :( - Joel and Mark are distracted to welcome to the new OCFS2 maintainer - The backlight queue - Small core kernel changes - lib/ updates - The rtc queue - Various random bits * akpm: (164 commits) rtc: rtc-davinci: use devm_*() functions rtc: rtc-max8997: use devm_request_threaded_irq() rtc: rtc-max8907: use devm_request_threaded_irq() rtc: rtc-da9052: use devm_request_threaded_irq() rtc: rtc-wm831x: use devm_request_threaded_irq() rtc: rtc-tps80031: use devm_request_threaded_irq() rtc: rtc-lp8788: use devm_request_threaded_irq() rtc: rtc-coh901331: use devm_clk_get() rtc: rtc-vt8500: use devm_*() functions rtc: rtc-tps6586x: use devm_request_threaded_irq() rtc: rtc-imxdi: use devm_clk_get() rtc: rtc-cmos: use dev_warn()/dev_dbg() instead of printk()/pr_debug() rtc: rtc-pcf8583: use dev_warn() instead of printk() rtc: rtc-sun4v: use pr_warn() instead of printk() rtc: rtc-vr41xx: use dev_info() instead of printk() rtc: rtc-rs5c313: use pr_err() instead of printk() rtc: rtc-at91rm9200: use dev_dbg()/dev_err() instead of printk()/pr_debug() rtc: rtc-rs5c372: use dev_dbg()/dev_warn() instead of printk()/pr_debug() rtc: rtc-ds2404: use dev_err() instead of printk() rtc: rtc-efi: use dev_err()/dev_warn()/pr_err() instead of printk() ...

rtc: max8997: add driver for max8997 rtc

2013-02-22T01:22:28Z

Add an rtc driver for Maxim 8997 multifunction chip. Max8997 has rtc module in it. and it can be used for timekeeping clock and system alarm. It provide various operational mode those are BCD/binary, 24/12hour, am/pm. Driver sets binary/24/ for default. Maxim 8997 also supports SMPL(Sudden Momentary Power Loss), WTSR (Watchdog Timeout and Software Reset). Signed-off-by: Jonghwa Lee Cc: Devendra Naga Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

rtc: add support for spi rtc rx4581

2013-02-22T01:22:28Z

[akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Torben Hohn Cc: Dan Carpenter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

rtc: add RTC driver for TPS80031/TPS80032

2013-02-22T01:22:28Z

Add an RTC driver for TPS80031/TPS80032 chips by TI. This driver supports: - Setting and getting time and date. - Setting and reading alarm time. - Alarm and interrupt functionlity. [akpm@linux-foundation.org: remove obsolete __devinit/__devexit] Signed-off-by: Laxman Dewangan Reviewed-by: Devendra Naga Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

rtc: add new lp8788 rtc driver

2013-02-22T01:22:27Z

TI LP8788 PMU supports regulators, battery charger, RTC, ADC, backlight driver and current sinks. This patch enables LP8788 rtc module. Signed-off-by: Milo(Woogyom) Kim Cc: "devendra.aaru" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

rtc: max77686: add Maxim 77686 driver

2013-02-22T01:22:27Z

Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun Signed-off-by: Jonghwa Lee Signed-off-by: Myugnjoo Ham Signed-off-by: Kyungmin Park Signed-off-by: Jingoo Han Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds