linux/drivers/power, branch v3.9

power: convert to idr_alloc()

2013-02-28T03:10:18Z

Convert to the much saner new idr interface. Signed-off-by: Tejun Heo Acked-by: Anton Vorontsov Cc: David Woodhouse Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'staging-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

2013-02-21T20:11:44Z

Pull staging tree update from Greg Kroah-Hartman: "Here's the big staging tree merge for 3.9-rc1 Lots of cleanups and updates for drivers all through the staging tree. We are pretty much "code neutral" here, adding just about as many lines as we removed. All of these have been in linux-next for a while." * tag 'staging-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (804 commits) staging: comedi: vmk80xx: wait for URBs to complete staging: comedi: drivers: addi-data: hwdrv_apci3200.c: Add a missing semicolon staging: et131x: Update TODO list staging: et131x: Remove assignment of skb->dev staging: wlan-ng: hfa384x.h: fix for error reported by smatch staging/zache checkpatch ERROR: spaces prohibited around that staging/ozwpan: Mark read only parameters and structs as const staging/ozwpan: Remove empty and unused function oz_cdev_heartbeat staging/ozwpan: Mark local functions as static (fix sparse warnings) staging/ozwpan: Add missing header includes staging/usbip: Mark local functions as static (fix sparse warnings) staging/xgifb: Remove duplicated code in loops. staging/xgifb: Consolidate return paths staging/xgifb: Remove code without effect staging/xgifb: Remove unnecessary casts staging/xgifb: Consolidate if/else if with identical code branches staging: vt6656: replaced custom TRUE definition with true staging: vt6656: replaced custom FALSE definition with false staging: vt6656: replace custom BOOL definition with bool staging/rtl8187se: Mark functions as static to silence sparse ...

Merge tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2013-02-21T20:05:51Z

Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...

Merge tag 'for-v3.9' of git://git.infradead.org/battery-2.6

2013-02-20T18:19:07Z

Pull battery updates from Anton Vorontsov: "Four new drivers: - goldfish_battery: This is Android Emulator battery driver. Originally from Google, but Intel folks reshaped it for mainline - pm2301_charger: A new driver for ST-Ericsson 2301 Power Management chip, uses AB8500 battery management core - qnap-poweroff: The driver adds poweroff functionality for QNAP NAS boxes - restart-poweroff: A generic driver that implements 'power off by restarting'. The actual poweroff functionality is implemented through a bootloader, so Linux' task is just to restart the box. The driver is useful on Buffalo Linkstation LS-XHL and LS-CHLv2 boards. Andrew Lunn worked on submitting the driver (as well as qnap-poweroff above). Additionally: - A lot of fixes for ab8500 drivers. This is a part of efforts of syncing internal ST-Ericsson development tree with the mainline. Lee Jones @ Linaro worked on compilation and reshaping these series. - New health properties for the power supplies: "Watchdog timer expire" and "Safety timer expire" - As usual, a bunch of fixes/cleanups here and there" * tag 'for-v3.9' of git://git.infradead.org/battery-2.6: (81 commits) bq2415x_charger: Add support for offline and 100mA mode generic-adc-battery: Fix forever loop in gab_remove() goldfish_battery: Add missing GENERIC_HARDIRQS dependency da9030_battery: Include notifier.h bq27x00_battery: Fix reporting battery temperature power/reset: Remove newly introduced __dev* annotations lp8727_charger: Small cleanup in naming ab8500_btemp: Demote initcall sequence ds2782_battery: Add power_supply_changed() calls for proper uevent support power: Add battery driver for goldfish emulator u8500-charger: Delay for USB enumeration ab8500-bm: Remove individual [charger|btemp|fg|chargalg] pdata structures ab8500-charger: Do not touch VBUSOVV bits ab8500-fg: Use correct battery charge full design pm2301: LPN mode control support pm2301: Enable vbat low monitoring ab8500-bm: Flush all work queues before suspending ab8500-fg: Go to INIT_RECOVERY when charger removed ab8500-charger: Add support for autopower on AB8505 and AB9540 abx500-chargalg: Add new sysfs interface to get current charge status ... Fix up fairly straightforward conflicts in the ab8500 driver. But since it seems to be ARM-specific, I can't even compile-test the result..

bq2415x_charger: Add support for offline and 100mA mode

2013-02-16T21:34:10Z

* Renamed mode BQ2415X_MODE_NONE to BQ2415X_MODE_OFF because this mode turning chaging completly off * Added new mode BQ2415X_MODE_NONE which enable charging with maximal current limit 100mA (this is minimal safe value for bq2415x chips) Signed-off-by: Pali Rohár Signed-off-by: Anton Vorontsov

generic-adc-battery: Fix forever loop in gab_remove()

2013-02-16T21:27:09Z

There is a forever loop calling iio_channel_release() because the "chan < " part of the "chan < ARRAY_SIZE()" is missing. This is in both the error handling on probe and also in the remove function. The other thing is that it's possible for some of the elements of the adc_bat->channel[chan] array to be an ERR_PTR(). I've changed them to be NULL instead. We're still not allowed to pass NULLs to iio_channel_release() so I've added a check. Finally, I removed an unused "chan = ARRAY_SIZE(gab_chan_name);" statement as a small cleanup. Signed-off-by: Dan Carpenter Signed-off-by: Anton Vorontsov

goldfish_battery: Add missing GENERIC_HARDIRQS dependency

2013-02-16T21:23:33Z

Fix this link error on s390: ERROR: "devm_request_threaded_irq" [drivers/power/goldfish_battery.ko] undefined! Cc: David Woodhouse Signed-off-by: Heiko Carstens Signed-off-by: Anton Vorontsov

da9030_battery: Include notifier.h

2013-02-09T01:28:35Z

randconfig complains about: drivers/power/da9030_battery.c:113: error: field ‘nb’ has incomplete type because there is no direct include for notifier.h which defines struct notifier_block. Signed-off-by: Michal Hocko Signed-off-by: Anton Vorontsov

driver-core: constify data for class_find_device()

2013-02-06T20:18:56Z

All in-kernel users of class_find_device() don't really need mutable data for match callback. In two places (kernel/power/suspend_test.c, drivers/scsi/osd/osd_uld.c) this patch changes match callbacks to use const search data. The const is propagated to rtc_class_open() and power_supply_get_by_name() parameters. Note that there's a dev reference leak in suspend_test.c that's not touched in this patch. Signed-off-by: Michał Mirosław Acked-by: Grant Likely Signed-off-by: Greg Kroah-Hartman

iio: Update iio_channel_get API to use consumer device pointer as argument

2013-02-06T19:23:52Z

For iio_channel_get to work with OF based configurations, it needs the consumer device pointer instead of the consumer device name as argument. Signed-off-by: Guenter Roeck Acked-by: Anton Vorontsov Acked-by: Chanwoo Choi Signed-off-by: Jonathan Cameron