linux/drivers/phy, branch v3.14

phy: let phy_provider_register be the last step in registering PHY

2014-02-18T20:13:16Z

Registering phy_provider before creating the PHY can result in PHY callbacks being invoked which will lead to aborts. In order to avoid this invoke phy_provider_register after phy_create and phy_set_drvdata. Reported-by: Felipe Balbi Signed-off-by: Kishon Vijay Abraham I Acked-by: Sylwester Nawrocki Signed-off-by: Greg Kroah-Hartman

phy-core: Don't allow building phy-core as a module

2014-02-18T20:13:16Z

include/phy/phy.h has stub code in there for when building without the phy-core enabled. This is useful for generic drivers such as ahci-platform, ehci-platoform and ohci-platform which have support for driving an optional phy passed to them through the devicetree. Since on some boards this phy functionality is not needed, being able to disable the phy subsystem without needing a lot of #ifdef magic in the driver using it is quite useful. However this breaks when the module using the phy subsystem is build-in and the phy-core is not, which leads to the build failing with missing symbol errors in the linking stage of the zImage. Which leads to gems such as this being added to the Kconfig for achi_platform: depends on GENERIC_PHY || !GENERIC_PHY Rather then duplicating this code in a lot of places using the phy-core, I believe it is better to simply not allow the phy-core to be built as a module. The phy core is quite small and has no external dependencies, so always building it in when enabling it should not be an issue. Signed-off-by: Hans de Goede Acked-by: Roger Quadros Acked-by: Andrew Lunn Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman

phy-core: Don't propagate -ENOSUPP from phy_pm_runtime_get_sync to caller

2014-02-18T20:13:16Z

The phy-core allows phy_init and phy_power_on to be called multiple times, but before this patch -ENOSUPP from phy_pm_runtime_get_sync would be propagated to the caller for the 2nd and later calls. Signed-off-by: Hans de Goede Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman

phy-core: phy_get: Leave error logging to the caller

2014-02-18T20:13:15Z

In various cases errors may be expected, ie probe-deferral or a call to phy_get from a driver where the use of a phy is optional. Rather then adding all sort of complicated checks for this, and/or adding special functions like devm_phy_get_optional, simply don't log an error, and let deciding if get_phy returning an error really should result in a dev_err up to the caller. Signed-off-by: Hans de Goede Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman

phy,phy-bcm-kona-usb2.c: Add dependency on HAS_IOMEM

2014-02-18T20:13:15Z

On archs like S390 or um this driver cannot build nor work. Make it depend on HAS_IOMEM to bypass build failures. drivers/phy/phy-bcm-kona-usb2.c:114: undefined reference to `devm_ioremap_resource' Signed-off-by: Richard Weinberger Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman

drivers: phy: Add support for optional phys

2014-02-05T05:48:43Z

Add devm_phy_optional_get and phy_optional_get, which should be used when the phy is optional. They does not return an error when the phy does not exist, rather they returns NULL, which is considered as a valid phy, but results in NOPs when used with the consumer API. Signed-off-by: Andrew Lunn Tested-by: Gregory CLEMENT Acked-by: Kishon Vijay Abraham I Signed-off-by: Jason Cooper

drivers: phy: Make NULL a valid phy reference

2014-02-05T05:27:54Z

The common clock framework considers NULL a valid clock reference. This makes handling optional clocks simple, in that if the optional clock is not available, a NULL reference can be used in the place of a real clock, simplifying the clock consumer. Extend this concept to the phy consumer API. A NULL can be passed to the release calls, the phy_init() and phy_exit() calls, and phy_power_on() and phy_power_off() and a NOP is performed. Signed-off-by: Andrew Lunn Tested-by: Gregory CLEMENT Acked-by: Kishon Vijay Abraham I Signed-off-by: Jason Cooper

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2014-01-25T19:17:34Z

Pull networking updates from David Miller: 1) BPF debugger and asm tool by Daniel Borkmann. 2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann. 3) Correct reciprocal_divide and update users, from Hannes Frederic Sowa and Daniel Borkmann. 4) Currently we only have a "set" operation for the hw timestamp socket ioctl, add a "get" operation to match. From Ben Hutchings. 5) Add better trace events for debugging driver datapath problems, also from Ben Hutchings. 6) Implement auto corking in TCP, from Eric Dumazet. Basically, if we have a small send and a previous packet is already in the qdisc or device queue, defer until TX completion or we get more data. 7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko. 8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel Borkmann. 9) Share IP header compression code between Bluetooth and IEEE802154 layers, from Jukka Rissanen. 10) Fix ipv6 router reachability probing, from Jiri Benc. 11) Allow packets to be captured on macvtap devices, from Vlad Yasevich. 12) Support tunneling in GRO layer, from Jerry Chu. 13) Allow bonding to be configured fully using netlink, from Scott Feldman. 14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can already get the TCI. From Atzm Watanabe. 15) New "Heavy Hitter" qdisc, from Terry Lam. 16) Significantly improve the IPSEC support in pktgen, from Fan Du. 17) Allow ipv4 tunnels to cache routes, just like sockets. From Tom Herbert. 18) Add Proportional Integral Enhanced packet scheduler, from Vijay Subramanian. 19) Allow openvswitch to mmap'd netlink, from Thomas Graf. 20) Key TCP metrics blobs also by source address, not just destination address. From Christoph Paasch. 21) Support 10G in generic phylib. From Andy Fleming. 22) Try to short-circuit GRO flow compares using device provided RX hash, if provided. From Tom Herbert. The wireless and netfilter folks have been busy little bees too. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits) net/cxgb4: Fix referencing freed adapter ipv6: reallocate addrconf router for ipv6 address when lo device up fib_frontend: fix possible NULL pointer dereference rtnetlink: remove IFLA_BOND_SLAVE definition rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info qlcnic: update version to 5.3.55 qlcnic: Enhance logic to calculate msix vectors. qlcnic: Refactor interrupt coalescing code for all adapters. qlcnic: Update poll controller code path qlcnic: Interrupt code cleanup qlcnic: Enhance Tx timeout debugging. qlcnic: Use bool for rx_mac_learn. bonding: fix u64 division rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC sfc: Use the correct maximum TX DMA ring size for SFC9100 Add Shradha Shah as the sfc driver maintainer. net/vxlan: Share RX skb de-marking and checksum checks with ovs tulip: cleanup by using ARRAY_SIZE() ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called net/cxgb4: Don't retrieve stats during recovery ...

Merge tag 'usb-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2014-01-21T00:13:02Z

Pull USB updates from Greg KH: "Here's the big USB pull request for 3.14-rc1 Lots of little things all over the place, and the usual USB gadget updates, and XHCI fixes (some for an issue reported by a lot of people). USB PHY updates as well as chipidea updates and fixes. All of these have been in the linux-next tree with no reported issues" * tag 'usb-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (318 commits) usb: chipidea: udc: using MultO at TD as real mult value for ISO-TX usb: chipidea: need to mask INT_STATUS when write otgsc usb: chipidea: put hw_phymode_configure before ci_usb_phy_init usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28 usb: chipidea: add freescale imx28 special write register method usb: ehci: add freescale imx28 special write register method usb: core: check for valid id_table when using the RefId feature usb: cdc-wdm: resp_count can be 0 even if WDM_READ is set usb: core: bail out if user gives an unknown RefId when using new_id usb: core: allow a reference device for new_id usb: core: add sanity checks when using bInterfaceClass with new_id USB: image: correct spelling mistake in comment USB: c67x00: correct spelling mistakes in comments usb: delete non-required instances of include usb:hub set hub->change_bits when over-current happens Revert "usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28" xhci: Set scatter-gather limit to avoid failed block writes. xhci: Avoid infinite loop when sg urb requires too many trbs usb: gadget: remove unused variable in gr_queue_int() ...

phy,exynos: Add dependency on HAS_IOMEM

2014-01-15T22:51:22Z

On archs like S390 or um this driver cannot build nor work. Make it depend on HAS_IOMEM to bypass build failures. drivers/built-in.o: In function `exynos_mipi_video_phy_probe': drivers/phy/phy-exynos-mipi-video.c:130: undefined reference to `devm_ioremap_resource' Signed-off-by: Richard Weinberger Signed-off-by: David S. Miller