linux/drivers/pci, branch v3.2.38

PCI: Allow pcie_aspm=force even when FADT indicates it is unsupported

2013-02-06T04:33:34Z

commit 9e16721498b0c3d3ebfa0b503c63d35c0a4c0642 upstream. Right now using pcie_aspm=force will not enable ASPM if the FADT indicates ASPM is unsupported. However, the semantics of force should probably allow for this, especially as they did before 3c076351c4 ("PCI: Rework ASPM disable code") This patch just skips the clearing of any ASPM setup that the firmware has carried out on this bus if pcie_aspm=force is being used. Reference: http://bugs.launchpad.net/bugs/962038 Signed-off-by: Colin Ian King Signed-off-by: Bjorn Helgaas Signed-off-by: Ben Hutchings

PCI: shpchp: Use per-slot workqueues to avoid deadlock

2013-02-06T04:33:33Z

commit f652e7d2916fe2fcf9e7d709aa5b7476b431e2dd upstream. When we have an SHPC-capable bridge with a second SHPC-capable bridge below it, pushing the upstream bridge's attention button causes a deadlock. The deadlock happens because we use the shpchp_wq workqueue to run shpchp_pushbutton_thread(), which uses shpchp_disable_slot() to remove devices below the upstream bridge. When we remove the downstream bridge, we call shpc_remove(), the shpchp driver's .remove() method. That calls flush_workqueue(shpchp_wq), which deadlocks because the shpchp_pushbutton_thread() work item is still running. This patch avoids the deadlock by creating a workqueue for every slot and removing the single shared workqueue. Here's the call path that leads to the deadlock: shpchp_queue_pushbutton_work queue_work(shpchp_wq) # shpchp_pushbutton_thread ... shpchp_pushbutton_thread shpchp_disable_slot remove_board shpchp_unconfigure_device pci_stop_and_remove_bus_device ... shpc_remove # shpchp driver .remove method hpc_release_ctlr cleanup_slots flush_workqueue(shpchp_wq) This change is based on code inspection, since we don't have hardware with this topology. Based-on-patch-by: Yijing Wang Signed-off-by: Bjorn Helgaas [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings

PCI: shpchp: Handle push button event asynchronously

2013-02-06T04:33:33Z

commit d347e75847c1fb299c97736638f45e6ea39702d4 upstream. Use non-ordered workqueue for attention button events. Attention button events on each slot can be handled asynchronously. So we should use non-ordered workqueue. This patch also removes ordered workqueue in shpchp as a result. 486b10b9f4 ("PCI: pciehp: Handle push button event asynchronously") made the same change to pciehp. I split this out from a patch by Yijing Wang so we fix one thing at a time and to make the shpchp history correspond more closely with the pciehp history. Signed-off-by: Bjorn Helgaas CC: Kenji Kaneshige Signed-off-by: Ben Hutchings

PCI/AER: pci_get_domain_bus_and_slot() call missing required pci_dev_put()

2013-02-06T04:33:33Z

commit a82b6af37d20bfe6e99a4d890f1cf1d89059929f upstream. The function aer_recover_queue() calls pci_get_domain_bus_and_slot(), which requires that the caller decrement the reference count with pci_dev_put(). This patch adds the missing call to pci_dev_put(). Signed-off-by: Betty Dall Signed-off-by: Bjorn Helgaas Reviewed-by: Shuah Khan Signed-off-by: Ben Hutchings

PCI: pciehp: Use per-slot workqueues to avoid deadlock

2013-02-06T04:33:32Z

commit c2be6f93b383c873a4f9d521afa49b1b67d06085 upstream. When we have a hotplug-capable PCIe port with a second hotplug-capable PCIe port below it, removing the device below the upstream port causes a deadlock. The deadlock happens because we use the pciehp_wq workqueue to run pciehp_power_thread(), which uses pciehp_disable_slot() to remove devices below the upstream port. When we remove the downstream PCIe port, we call pciehp_remove(), the pciehp driver's .remove() method. That calls flush_workqueue(pciehp_wq), which deadlocks because the pciehp_power_thread() work item is still running. This patch avoids the deadlock by creating a workqueue for every PCIe port and removing the single shared workqueue. Here's the call path that leads to the deadlock: pciehp_queue_pushbutton_work queue_work(pciehp_wq) # queue pciehp_power_thread ... pciehp_power_thread pciehp_disable_slot remove_board pciehp_unconfigure_device pci_stop_and_remove_bus_device ... pciehp_remove # pciehp driver .remove method pciehp_release_ctrl pcie_cleanup_slot flush_workqueue(pciehp_wq) This is fairly urgent because it can be caused by simply unplugging a Thunderbolt adapter, as reported by Daniel below. [bhelgaas: changelog] Reference: http://lkml.kernel.org/r/CAMVG2ssiRgcTD1bej2tkUUfsWmpL5eNtPcNif9va2-Gzb2u8nQ@mail.gmail.com Reported-and-tested-by: Daniel J Blueman Reviewed-by: Kenji Kaneshige Signed-off-by: Yijing Wang Signed-off-by: Bjorn Helgaas [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings

PCI: pciehp: Handle push button event asynchronously

2013-02-06T04:33:32Z

commit 486b10b9f43500741cd63a878d0ef23cd87fc66d upstream. Use non-ordered workqueue for attention button events. Attention button events on each slot can be handled asynchronously. So we should use non-ordered workqueue. This patch also removes ordered workqueue in pciehp as a result. Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes Signed-off-by: Ben Hutchings

PCI: pciehp: Fix wrong workqueue cleanup

2013-02-06T04:33:32Z

commit 027e8d52abdd44bc00e405af83cd2fbfb96c0824 upstream. Fix improper workqueue cleanup. In the current pciehp, pcied_cleanup() calls destroy_workqueue() before calling pcie_port_service_unregister(). This causes kernel oops because flush_workqueue() is called in the pcie_port_service_unregister() code path after the workqueue was destroyed. So pcied_cleanup() must call pcie_port_service_unregister() first before calling destroy_workqueue(). Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes Signed-off-by: Ben Hutchings

PCI: Reduce Ricoh 0xe822 SD card reader base clock frequency to 50MHz

2013-01-16T01:13:13Z

commit 812089e01b9f65f90fc8fc670d8cce72a0e01fbb upstream. Otherwise it fails like this on cards like the Transcend 16GB SDHC card: mmc0: new SDHC card at address b368 mmcblk0: mmc0:b368 SDC 15.0 GiB mmcblk0: error -110 sending status command, retrying mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb0 Tested on my Lenovo x200 laptop. [bhelgaas: changelog] Signed-off-by: Andy Lutomirski Signed-off-by: Bjorn Helgaas Acked-by: Chris Ball CC: Manoj Iyer Signed-off-by: Ben Hutchings

PCI : Calculate right add_size

2012-12-06T11:20:13Z

commit a4ac9fea016fc5c09227eb479bd35e34978323a4 upstream. During debug of one SRIOV enabled hotplug device, we found found that add_size is not passed properly. The device has devices under two level bridges: +-[0000:80]-+-00.0-[81-8f]-- | +-01.0-[90-9f]-- | +-02.0-[a0-af]----00.0-[a1-a3]--+-02.0-[a2]--+-00.0 Oracle Corporation Device | | \-03.0-[a3]--+-00.0 Oracle Corporation Device Which means later the parent bridge will not try to add a big enough range: [ 557.455077] pci 0000:a0:00.0: BAR 14: assigned [mem 0xf9000000-0xf93fffff] [ 557.461974] pci 0000:a0:00.0: BAR 15: assigned [mem 0xf6000000-0xf61fffff pref] [ 557.469340] pci 0000:a1:02.0: BAR 14: assigned [mem 0xf9000000-0xf91fffff] [ 557.476231] pci 0000:a1:02.0: BAR 15: assigned [mem 0xf6000000-0xf60fffff pref] [ 557.483582] pci 0000:a1:03.0: BAR 14: assigned [mem 0xf9200000-0xf93fffff] [ 557.490468] pci 0000:a1:03.0: BAR 15: assigned [mem 0xf6100000-0xf61fffff pref] [ 557.497833] pci 0000:a1:03.0: BAR 14: can't assign mem (size 0x200000) [ 557.504378] pci 0000:a1:03.0: failed to add optional resources res=[mem 0xf9200000-0xf93fffff] [ 557.513026] pci 0000:a1:02.0: BAR 14: can't assign mem (size 0x200000) [ 557.519578] pci 0000:a1:02.0: failed to add optional resources res=[mem 0xf9000000-0xf91fffff] It turns out we did not calculate size1 properly. static resource_size_t calculate_memsize(resource_size_t size, resource_size_t min_size, resource_size_t size1, resource_size_t old_size, resource_size_t align) { if (size < min_size) size = min_size; if (old_size == 1 ) old_size = 0; if (size < old_size) size = old_size; size = ALIGN(size + size1, align); return size; } We should not pass add_size with min_size in calculate_memsize since that will make add_size not contribute final add_size. So just pass add_size with size1 to calculate_memsize(). With this change, we should have chance to remove extra addon in pci_reassign_resource. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes Signed-off-by: Ben Hutchings

PCI: Check P2P bridge for invalid secondary/subordinate range

2012-10-17T02:48:34Z

commit 1965f66e7db08d1ebccd24a59043eba826cc1ce8 upstream. For bridges with "secondary > subordinate", i.e., invalid bus number apertures, we don't enumerate anything behind the bridge unless the user specified "pci=assign-busses". This patch makes us automatically try to reassign the downstream bus numbers in this case (just for that bridge, not for all bridges as "pci=assign-busses" does). We don't discover all the devices on the Intel DP43BF motherboard without this change (or "pci=assign-busses") because its BIOS configures a bridge as: pci 0000:00:1e.0: PCI bridge to [bus 20-08] (subtractive decode) [bhelgaas: changelog, change message to dev_info] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=18412 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=625754 Reported-by: Brian C. Huffman Reported-by: VL Tested-by: VL Signed-off-by: Yinghai Lu Signed-off-by: Bjorn Helgaas Signed-off-by: Ben Hutchings