linux/drivers/net, branch v3.2.31

tg3: Fix TSO CAP for 5704 devs w / ASF enabled

2012-10-10T02:31:34Z

[ Upstream commit cf9ecf4b631f649a964fa611f1a5e8874f2a76db ] On the earliest TSO capable devices, TSO was accomplished through firmware. The TSO cannot coexist with ASF management firmware though. The tg3 driver determines whether or not ASF is enabled by calling tg3_get_eeprom_hw_cfg(), which checks a particular bit of NIC memory. Commit dabc5c670d3f86d15ee4f42ab38ec5bd2682487d, entitled "tg3: Move TSO_CAPABLE assignment", accidentally moved the code that determines TSO capabilities earlier than the call to tg3_get_eeprom_hw_cfg(). As a consequence, the driver was attempting to determine TSO capabilities before it had all the data it needed to make the decision. This patch fixes the problem by revisiting and reevaluating the decision after tg3_get_eeprom_hw_cfg() is called. Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Ben Hutchings

pppoe: drop PPPOX_ZOMBIEs in pppoe_release

2012-10-10T02:31:30Z

[ Upstream commit 2b018d57ff18e5405823e5cb59651a5b4d946d7b ] When PPPOE is running over a virtual ethernet interface (e.g., a bonding interface) and the user tries to delete the interface in case the PPPOE state is ZOMBIE, the kernel will loop forever while unregistering net_device for the reference count is not decreased to zero which should have been done with dev_put(). Signed-off-by: Xiaodong Xu Signed-off-by: David S. Miller Signed-off-by: Ben Hutchings

sierra_net: Endianess bug fix.

2012-10-10T02:31:27Z

[ Upstream commit 2120c52da6fe741454a60644018ad2a6abd957ac ] I discovered I couldn't get sierra_net to work on a powerpc. Turns out the firmware attribute check assumes the system is little endian and hence fails because the attributes is a 16 bit value. Signed-off-by: Len Sorensen Signed-off-by: David S. Miller Signed-off-by: Ben Hutchings

netxen: check for root bus in netxen_mask_aer_correctable

2012-10-10T02:31:26Z

[ Upstream commit e4d1aa40e363ed3e0486aeeeb0d173f7f822737e ] Add a check if pdev->bus->self == NULL (root bus). When attaching a netxen NIC to a VM it can be on the root bus and the guest would crash in netxen_mask_aer_correctable() because of a NULL pointer dereference if CONFIG_PCIEAER is present. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller Signed-off-by: Ben Hutchings

ixp4xx_hss: fix build failure due to missing linux/module.h inclusion

2012-10-10T02:31:26Z

[ Upstream commit 0b836ddde177bdd5790ade83772860940bd481ea ] Commit 36a1211970193ce215de50ed1e4e1272bc814df1 (netprio_cgroup.h: dont include module.h from other includes) made the following build error on ixp4xx_hss pop up: CC [M] drivers/net/wan/ixp4xx_hss.o drivers/net/wan/ixp4xx_hss.c:1412:20: error: expected ';', ',' or ')' before string constant drivers/net/wan/ixp4xx_hss.c:1413:25: error: expected ';', ',' or ')' before string constant drivers/net/wan/ixp4xx_hss.c:1414:21: error: expected ';', ',' or ')' before string constant drivers/net/wan/ixp4xx_hss.c:1415:19: error: expected ';', ',' or ')' before string constant make[8]: *** [drivers/net/wan/ixp4xx_hss.o] Error 1 This was previously hidden because ixp4xx_hss includes linux/hdlc.h which includes linux/netdevice.h which includes linux/netprio_cgroup.h which used to include linux/module.h. The real issue was actually present since the initial commit that added this driver since it uses macros from linux/module.h without including this file. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Ben Hutchings

net: ethernet: davinci_cpdma: decrease the desc count when cleaning up the remaining packets

2012-10-10T02:31:25Z

[ Upstream commit ffb5ba90017505a19e238e986e6d33f09e4df765 ] chan->count is used by rx channel. If the desc count is not updated by the clean up loop in cpdma_chan_stop, the value written to the rxfree register in cpdma_chan_start will be incorrect. Signed-off-by: Tao Hou Signed-off-by: David S. Miller Signed-off-by: Ben Hutchings

bnx2x: fix rx checksum validation for IPv6

2012-10-10T02:31:20Z

[ Upstream commit e488921f44765e8ab6c48ca35e3f6b78df9819df ] Commit d6cb3e41 "bnx2x: fix checksum validation" caused a performance regression for IPv6. Rx checksum offload does not work. IPv6 packets are passed to the stack with CHECKSUM_NONE. The hardware obviously cannot perform IP checksum validation for IPv6, because there is no checksum in the IPv6 header. This should not prevent us from setting CHECKSUM_UNNECESSARY. Tested on BCM57711. Signed-off-by: Michal Schmidt Acked-by: Eric Dumazet Acked-by: Eilon Greenstein Signed-off-by: David S. Miller Signed-off-by: Ben Hutchings

can: ti_hecc: fix oops during rmmod

2012-10-10T02:31:01Z

commit ab04c8bd423edb03e2148350a091836c196107fc upstream. This patch fixes an oops which occurs when unloading the driver, while the network interface is still up. The problem is that first the io mapping is teared own, then the CAN device is unregistered, resulting in accessing the hardware's iomem: [ 172.744232] Unable to handle kernel paging request at virtual address c88b0040 [ 172.752441] pgd = c7be4000 [ 172.755645] [c88b0040] *pgd=87821811, *pte=00000000, *ppte=00000000 [ 172.762207] Internal error: Oops: 807 [#1] PREEMPT ARM [ 172.767517] Modules linked in: ti_hecc(-) can_dev [ 172.772430] CPU: 0 Not tainted (3.5.0alpha-00037-g3554cc0 #126) [ 172.778961] PC is at ti_hecc_close+0xb0/0x100 [ti_hecc] [ 172.784423] LR is at __dev_close_many+0x90/0xc0 [ 172.789123] pc : [] lr : [] psr: 60000013 [ 172.789123] sp : c5c1de68 ip : 00040081 fp : 00000000 [ 172.801025] r10: 00000001 r9 : c5c1c000 r8 : 00100100 [ 172.806457] r7 : c5d0a48c r6 : c5d0a400 r5 : 00000000 r4 : c5d0a000 [ 172.813232] r3 : c88b0000 r2 : 00000001 r1 : c5d0a000 r0 : c5d0a000 [ 172.820037] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 172.827423] Control: 10c5387d Table: 87be4019 DAC: 00000015 [ 172.833404] Process rmmod (pid: 600, stack limit = 0xc5c1c2f0) [ 172.839447] Stack: (0xc5c1de68 to 0xc5c1e000) [ 172.843994] de60: bf00c6b8 c5c1dec8 c5d0a000 c5d0a000 00200200 c033be58 [ 172.852478] de80: c5c1de44 c5c1dec8 c5c1dec8 c033bf2c c5c1de90 c5c1de90 c5d0a084 c5c1de44 [ 172.860992] dea0: c5c1dec8 c033c098 c061d3dc c5d0a000 00000000 c05edf28 c05edb34 c000d724 [ 172.869476] dec0: 00000000 c033c2f8 c5d0a084 c5d0a084 00000000 c033c370 00000000 c5d0a000 [ 172.877990] dee0: c05edb00 c033c3b8 c5d0a000 bf00d3ac c05edb00 bf00d7c8 bf00d7c8 c02842dc [ 172.886474] df00: c02842c8 c0282f90 c5c1c000 c05edb00 bf00d7c8 c0283668 bf00d7c8 00000000 [ 172.894989] df20: c0611f98 befe2f80 c000d724 c0282d10 bf00d804 00000000 00000013 c0068a8c [ 172.903472] df40: c5c538e8 685f6974 00636365 c61571a8 c5cb9980 c61571a8 c6158a20 c00c9bc4 [ 172.911987] df60: 00000000 00000000 c5cb9980 00000000 c5cb9980 00000000 c7823680 00000006 [ 172.920471] df80: bf00d804 00000880 c5c1df8c 00000000 000d4267 befe2f80 00000001 b6d90068 [ 172.928985] dfa0: 00000081 c000d5a0 befe2f80 00000001 befe2f80 00000880 b6d90008 00000008 [ 172.937469] dfc0: befe2f80 00000001 b6d90068 00000081 00000001 00000000 befe2eac 00000000 [ 172.945983] dfe0: 00000000 befe2b18 00023ba4 b6e6addc 60000010 befe2f80 a8e00190 86d2d344 [ 172.954498] [] (ti_hecc_close+0xb0/0x100 [ti_hecc]) from [] (__dev__registered_many+0xc0/0x2a0) [ 172.984161] [] (rollback_registered_many+0xc0/0x2a0) from [] (rollback_registered+0x20/0x30) [ 172.994750] [] (rollback_registered+0x20/0x30) from [] (unregister_netdevice_queue+0x68/0x98) [ 173.005401] [] (unregister_netdevice_queue+0x68/0x98) from [] (unregister_netdev+0x18/0x20) [ 173.015899] [] (unregister_netdev+0x18/0x20) from [] (ti_hecc_remove+0x60/0x80 [ti_hecc]) [ 173.026245] [] (ti_hecc_remove+0x60/0x80 [ti_hecc]) from [] (platform_drv_remove+0x14/0x18) [ 173.036712] [] (platform_drv_remove+0x14/0x18) from [] (__device_release_driver+0x7c/0xbc) Cc: Anant Gole Tested-by: Jan Luebbe Signed-off-by: Marc Kleine-Budde Signed-off-by: Ben Hutchings

can: janz-ican3: fix support for older hardware revisions

2012-10-10T02:31:01Z

commit e21093ef6fb4cbecdf926102286dbe280ae965db upstream. The Revision 1.0 Janz CMOD-IO Carrier Board does not have support for the reset registers. To support older hardware, the code is changed to use the hardware reset register on the Janz VMOD-ICAN3 hardware itself. Signed-off-by: Ira W. Snyder Signed-off-by: Marc Kleine-Budde Signed-off-by: Ben Hutchings

asix: Support DLink DUB-E100 H/W Ver C1

2012-10-10T02:30:59Z

commit ed3770a9cd5764a575b83810ea679bbff2b03082 upstream. Signed-off-by: Søren Holm Signed-off-by: David S. Miller [bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings