linux/drivers/net, branch v3.0.84

gianfar: add missing iounmap() on error in gianfar_ptp_probe()

2013-06-27T17:34:32Z

[ Upstream commit e5f5e380e0f3bb11f04ca5bc66a551e58e0ad26e ] Add the missing iounmap() before return from gianfar_ptp_probe() in the error handling case. Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ath9k: Disable PowerSave by default

2013-06-20T18:28:20Z

commit 531671cb17af07281e6f28c1425f754346e65c41 upstream. Almost all the DMA issues which have plagued ath9k (in station mode) for years are related to PS. Disabling PS usually "fixes" the user's connection stablility. Reports of DMA problems are still trickling in and are sitting in the kernel bugzilla. Until the PS code in ath9k is given a thorough review, disbale it by default. The slight increase in chip power consumption is a small price to pay for improved link stability. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville Signed-off-by: Greg Kroah-Hartman

b43: stop format string leaking into error msgs

2013-06-20T18:28:20Z

commit e0e29b683d6784ef59bbc914eac85a04b650e63c upstream. The module parameter "fwpostfix" is userspace controllable, unfiltered, and is used to define the firmware filename. b43_do_request_fw() populates ctx->errors[] on error, containing the firmware filename. b43err() parses its arguments as a format string. For systems with b43 hardware, this could lead to a uid-0 to ring-0 escalation. CVE-2013-2852 Signed-off-by: Kees Cook Signed-off-by: John W. Linville Signed-off-by: Greg Kroah-Hartman

r8169: fix vlan tag read ordering.

2013-05-19T17:04:47Z

commit ce11ff5e5963e441feb591e76278528f876c332d upstream. Control of receive descriptor must not be returned to ethernet chipset before vlan tag processing is done. VLAN tag receive word is now reset both in normal and error path. Signed-off-by: Francois Romieu Spotted-by: Timo Teras Cc: Hayes Wang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

macvlan: fix passthru mode race between dev removal and rx path

2013-05-19T17:04:46Z

[ Upstream commit 233c7df0821c4190e2d3f4be0f2ca0ab40a5ed8c, note that I had to add list_first_or_null_rcu to rculist.h in order to accomodate this fix. ] Currently, if macvlan in passthru mode is created and data are rxed and you remove this device, following panic happens: NULL pointer dereference at 0000000000000198 IP: [] macvlan_handle_frame+0x153/0x1f7 [macvlan] I'm using following script to trigger this: I run this script while "ping -f" is running on another machine to send packets to e1 rx. Reason of the panic is that list_first_entry() is blindly called in macvlan_handle_frame() even if the list was empty. vlan is set to incorrect pointer which leads to the crash. I'm fixing this by protecting port->vlans list by rcu and by preventing from getting incorrect pointer in case the list is empty. Introduced by: commit eb06acdc85585f2 "macvlan: Introduce 'passthru' mode to takeover the underlying device" Signed-off-by: Jiri Pirko Acked-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

3c59x: fix PCI resource management

2013-05-19T17:04:45Z

[ Upstream commit 4b264a1676e70dc656ba53a8cac690f2d4b65f4e ] The driver wrongly claimed I/O ports at an address returned by pci_iomap() -- even if it was passed an MMIO address. Fix this by claiming/releasing all PCI resources in the PCI driver's probe()/remove() methods instead and get rid of 'must_free_region' flag weirdness (why would Cardbus claim anything for us?). Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

3c59x: fix freeing nonexistent resource on driver unload

2013-05-19T17:04:44Z

[ Upstream commit c81400be716aa4c76f6ebf339ba94358dbbf6da6 ] When unloading the driver that drives an EISA board, a message similar to the following one is displayed: Trying to free nonexistent resource <0000000000013000-000000000001301f> Then an user is unable to reload the driver because the resource it requested in the previous load hasn't been freed. This happens most probably due to a typo in vortex_eisa_remove() which calls release_region() with 'dev->base_addr' instead of 'edev->base_addr'... Reported-by: Matthew Whitehead Tested-by: Matthew Whitehead Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA)

2013-05-19T17:04:43Z

[ Upstream commit 3b54912f9cd167641b91d4a697bd742f70e534fe ] The venerable 3c509 driver only sets its device parent in one case, the ISAPnP one. It does this with the SET_NETDEV_DEV function. It should register with the device hierarchy in two additional cases: standard (non-PnP) ISA and EISA. - Currently they appear here: /sys/devices/virtual/net/eth0 (standard ISA) /sys/devices/virtual/net/eth1 (EISA) - Rather, they should instead be here: /sys/devices/isa/3c509.0/net/eth0 (standard ISA) /sys/devices/pci0000:00/0000:00:07.0/00:04/net/eth1 (EISA) Tested on ISA and EISA boards. Signed-off-by: Matthew Whitehead Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

mwifiex: fix setting of multicast filter

2013-05-19T17:04:42Z

commit ccd384b10420ac81ba3fb9b0a7d18272c7173552 upstream. A small bug in this code was causing the ALLMULTI filter to be set when in fact we were just wanting to program a selective multicast list to the hardware. Fix that bug and remove a redundant if condition in the code that follows. This fixes wakeup behaviour when multicast WOL is enabled. Previously, all multicast packets would wake up the system. Now, only those that the host intended to receive trigger wakeups. Signed-off-by: Daniel Drake Acked-by: Bing Zhao Signed-off-by: John W. Linville Signed-off-by: Greg Kroah-Hartman

mwifiex: clear is_suspended flag when interrupt is received early

2013-05-19T17:04:41Z

commit 48795424acff7215d5eac0b52793a2c1eb3a6283 upstream. When the XO-4 with 8787 wireless is woken up due to wake-on-WLAN mwifiex is often flooded with "not allowed while suspended" messages and the interface is unusable. [ 202.171609] int: sdio_ireg = 0x1 [ 202.180700] info: mwifiex_process_hs_config: auto cancelling host sleep since there is interrupt from the firmware [ 202.201880] event: wakeup device... [ 202.211452] event: hs_deactivated [ 202.514638] info: --- Rx: Data packet --- [ 202.514753] data: 4294957544 BSS(0-0): Data <= kernel [ 202.514825] PREP_CMD: device in suspended state [ 202.514839] data: dequeuing the packet ec7248c0 ec4869c0 [ 202.514886] mwifiex_write_data_sync: not allowed while suspended [ 202.514886] host_to_card, write iomem (1) failed: -1 [ 202.514917] mwifiex_write_data_sync: not allowed while suspended [ 202.514936] host_to_card, write iomem (2) failed: -1 [ 202.514949] mwifiex_write_data_sync: not allowed while suspended [ 202.514965] host_to_card, write iomem (3) failed: -1 [ 202.514976] mwifiex_write_data_async failed: 0xFFFFFFFF This can be readily reproduced when putting the XO-4 in a loop where it goes to sleep due to inactivity, but then wakes up due to an incoming ping. The error is hit within an hour or two. This issue happens when an interrupt comes in early while host sleep is still activated. Driver handles this case by auto cancelling host sleep. However is_suspended flag is still set which prevents any cmd or data from being sent to firmware. Fix it by clearing is_suspended flag in this path. Reported-by: Daniel Drake Tested-by: Daniel Drake Signed-off-by: Bing Zhao Signed-off-by: John W. Linville Signed-off-by: Greg Kroah-Hartman