linux/drivers/net, branch v2.6.16.17

[PATCH] TG3: ethtool always report port is TP.

2006-05-20T22:00:31Z

Even with fiber cards ethtool reports that the connected port is TP, the patch fix this. Signed-off-by: Karsten Keil Acked-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Chris Wright Signed-off-by: Greg Kroah-Hartman

[PATCH] via-rhine: zero pad short packets on Rhine I ethernet cards

2006-05-20T22:00:28Z

Fixes Rhine I cards disclosing fragments of previously transmitted frames in new transmissions. Before transmission, any socket buffer (skb) shorter than the ethernet minimum length of 60 bytes was zero-padded. On Rhine I cards the data can later be copied into an aligned transmission buffer without copying this padding. This resulted in the transmission of the frame with the extra bytes beyond the provided content leaking the previous contents of this buffer on to the network. Now zero-padding is repeated in the local aligned buffer if one is used. Following a suggestion from the via-rhine maintainer, no attempt is made here to avoid the duplicated effort of padding the skb if it is known that an aligned buffer will definitely be used. This is to make the change "obviously correct" and allow it to be applied to a stable kernel if necessary. There is no change to the flow of control and the changes are only to the Rhine I code path. The patch has run on an in-service Rhine-I host without incident. Frames shorter than 60 bytes are now correctly zero-padded when captured on a separate host. I see no unusual stats reported by ifconfig, and no unusual log messages. Signed-off-by: Craig Brind Signed-off-by: Roger Luethi Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik Signed-off-by: Greg Kroah-Hartman Signed-off-by: Chris Wright

[PATCH] NET: e1000: Update truesize with the length of the packet for packet split

2006-05-01T19:03:44Z

Update skb with the real packet size. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok Signed-off-by: John Ronciak Signed-off-by: Greg Kroah-Hartman

[PATCH] sky2: bad memory reference on dual port cards

2006-04-17T20:16:04Z

Sky2 driver will oops referencing bad memory if used on a dual port card. The problem is accessing past end of MIB counter space. Signed-off-by: Stephen Hemminger Signed-off-by: Greg Kroah-Hartman

[PATCH] hostap: Fix EAPOL frame encryption

2006-04-07T16:44:30Z

Fixed encrypted of EAPOL frames from wlan#ap interface (hostapd). This was broken when moving to use new frame control field defines in net/ieee80211.h. hostapd uses Protected flag, not protocol version (which was cleared in this function anyway). This fixes WPA group key handshake and re-authentication. http://hostap.epitest.fi/bugz/show_bug.cgi?id=126 Signed-off-by: Jouni Malinen

[PATCH] AIRO{,_CS} <-> CRYPTO fixes

2006-04-07T16:44:30Z

CRYPTO is a helper variable, and to make it easier for users, it should therefore select'ed and not be listed in the dependencies. drivers/net/wireless/airo.c requires CONFIG_CRYPTO for compilations. Therefore, AIRO_CS also has to select CRYPTO. Signed-off-by: Adrian Bunk Signed-off-by: Greg Kroah-Hartman

[PATCH] drivers/net/wireless/ipw2200.c: fix an array overun

2006-04-07T16:44:29Z

This patch fixes a big array overun found by the Coverity checker. This was already fixed in Linus' tree. Signed-off-by: Adrian Bunk Signed-off-by: Greg Kroah-Hartman

[PATCH] PCMCIA_SPECTRUM must select FW_LOADER

2006-04-07T16:44:27Z

PCMCIA_SPECTRUM must select FW_LOADER. Reported by "Alexander E. Patrakov" . This patch was already included in Linus' tree. Signed-off-by: Adrian Bunk Signed-off-by: Greg Kroah-Hartman

[PATCH] USB: Fix irda-usb use after use

2006-04-07T16:44:26Z

Don't read from free'd memory after calling netif_rx(). docopy is used as a boolean (0 and 1) so unsigned int is sufficient. Coverity bug #928 Signed-off-by: Eugene Teo Cc: "David S. Miller" Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman

[TG3]: 40-bit DMA workaround part 2

2006-03-19T21:21:12Z

The 40-bit DMA workaround recently implemented for 5714, 5715, and 5780 needs to be expanded because there may be other tg3 devices behind the EPB Express to PCIX bridge in the 5780 class device. For example, some 4-port card or mother board designs have 5704 behind the 5714. All devices behind the EPB require the 40-bit DMA workaround. Thanks to Chris Elmquist again for reporting the problem and testing the patch. Signed-off-by: Michael Chan Signed-off-by: David S. Miller