linux/drivers/net/phy, branch v2.6.22.5

phy: Fix phy_id for Vitesse 824x PHY

2007-06-28T18:26:06Z

The phy_id specified for the Vitesse 824x PHY would never match because it was expecting bits to be set that would be masked by the phy_id_mask. Fix the phy_id so it will match properly, and changed the mdio_bus_match to mask both the driver and devices phy_id with the mask so we dont have this issue in the future. Signed-off-by: Kumar Gala

phylib: add RGMII-ID mode to the Marvell m88e1111 PHY to fix broken ucc_geth

2007-06-09T22:25:35Z

Support for configuring RGMII-ID (RGMII with internal delay) mode on the 88e1111 and 88e1145. Ucc_geth on MPC8360EMDS(the main user of ucc_geth) is broken after changed to use phylib. It is fixed by adding this internal delay. Also renamed 88e1111s -> 88e1111 (no references to an 88e1111s part were found), and fixed some whitespace. Signed-off-by: Kim Phillips Signed-off-by: Li Yang Signed-off-by: Jeff Garzik

fix compiler warning in fixed.c

2007-05-24T21:20:49Z

Correct the following compiler warning (and warnings resulting from the correction): warning: 'fixed_mdio_register_device' defined but not used Signed-off-by: Denver Gingerich Cc: Vitaly Bordug Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik

Add support for the Davicom DM9161A PHY

2007-05-11T21:53:43Z

Distinguish between the Davicom DM9161A PHY and the DM9161E. Signed-off-by: Kim Phillips Signed-off-by: Jeff Garzik

Use menuconfig objects: PHY

2007-05-11T21:53:16Z

Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik

[S390] Kconfig: unwanted menus for s390.

2007-05-10T13:46:07Z

Disable some more menus in the configuration files that are of no interest to a s390 machine. Signed-off-by: Martin Schwidefsky

unify flush_work/flush_work_keventd and rename it to cancel_work_sync

2007-05-09T19:30:53Z

flush_work(wq, work) doesn't need the first parameter, we can use cwq->wq (this was possible from the very beginnig, I missed this). So we can unify flush_work_keventd and flush_work. Also, rename flush_work() to cancel_work_sync() and fix all callers. Perhaps this is not the best name, but "flush_work" is really bad. (akpm: this is why the earlier patches bypassed maintainers) Signed-off-by: Oleg Nesterov Cc: Jeff Garzik Cc: "David S. Miller" Cc: Jens Axboe Cc: Tejun Heo Cc: Auke Kok , Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

phy: use flush_work_keventd()

2007-05-09T19:30:51Z

(akpm: bypassed maintainers, sorry. There are other patches which depend on this) Cc: "Maciej W. Rozycki" Cc: David Howells Cc: Jeff Garzik Cc: Oleg Nesterov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

network: add the missing phy_device speed information to phy_mii_ioctl

2007-04-28T15:00:57Z

Function `phy_mii_ioctl' returns physical device's information based on user requests. When requested to return the basic mode control register information (BMCR), the original implementation only returns the physical device's duplex information and forgets to return speed information, which should not be because BMCR register is used to hold both duplex and speed information. The patch checks the BMCR value against speed-related flags and fills the return structure's speed field accordingly. Signed-off-by: Shan Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik

phy layer: add kernel-doc + DocBook

2007-04-28T15:00:57Z

Convert function documentation in drivers/net/phy/ to kernel-doc and add it to DocBook. Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik