linux/drivers/net/can, branch v3.3

can: sja1000: fix isr hang when hw is unplugged under load

2012-02-20T10:36:56Z

In the case of hotplug enabled devices (PCMCIA/PCIeC) the removal of the hardware can cause an infinite loop in the common sja1000 isr. Use the already retrieved status register to indicate a possible hardware removal and double check by reading the mode register in sja1000_is_absent. Cc: stable@kernel.org [3.2+] Signed-off-by: Oliver Hartkopp Acked-by: Wolfgang Grandegger Signed-off-by: Marc Kleine-Budde

can: peak_pci: Fix the way channels are linked together

2012-02-02T23:26:27Z

Change the way channels objects are linked together by peak_pci_probe() avoiding any kernel oops when driver is removed. Side effect is that the list is now browsed from last to first channel. Signed-off-by: Stephane Grosjean Signed-off-by: Marc Kleine-Budde

can: ems_usb: Removed double netif_device_detach

2012-02-02T23:25:31Z

netif_device_attched is called twice when ems_usb_start fails with -ENODEV Signed-off-by: Sebastian Haas Signed-off-by: Marc Kleine-Budde

can: pch_can: fix error passive level test

2012-02-02T23:25:22Z

The test (((errc & PCH_REC) >> 8) > 127) would always be false because the receive error counter ((errc & PCH_REC) >> 8) is at most 127, where PCH_REC is defined as 0x7f00. To test whether the receive error counter has reached the error passive level, the RP bit (15) should be used. Signed-off-by: Xi Wang Acked-by: Wolfgang Grandegger Signed-off-by: Marc Kleine-Budde

can: ti_hecc: use netif_rx in the interrupt

2012-02-02T23:25:15Z

This patch fixes locking problems by using netif_rx() instead of netif_receive_skb() in ti_hecc_error() called from the interrupt context. Signed-off-by: Wolfgang Grandegger Signed-off-by: Marc Kleine-Budde

can: cc770: Fix indirect access deadlock on ISA cards

2012-02-02T23:25:06Z

This fix avoids a deadlock if an interrupt occurs during consecutive port operations on ISA cards utilising indirect access via address and data port. Tested on a B&R ISA card. Cc: linux-can@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Wolfgang Zarre Acked-by: Wolfgang Grandegger Signed-off-by: Marc Kleine-Budde

can: cc770: store echo skb before starting the transfer

2012-02-02T23:24:59Z

On slow systems and high CAN bitrates, the error message "can_put_echo_skb: BUG! echo_skb is occupied!" did show up because can_put_echo_skb() was called after starting the transfer. Signed-off-by: Wolfgang Grandegger Signed-off-by: Marc Kleine-Budde

can: flexcan: fix irq flooding by clearing all interrupt sources

2012-02-02T23:24:50Z

As pointed out by Reuben Dowle and Lothar Waßmann, the TWRN_INT, RWRN_INT, BOFF_INT interrupt sources need to be cleared as well to avoid interrupt flooding, at least for the Flexcan on i.MX28 SOCs. Furthermore, the interrupts are only cleared, if really one of those interrupt sources are pending (which is not the case for rx and tx done). Cc: Reuben Dowle Cc: Lothar Waßmann Signed-off-by: Wolfgang Grandegger Signed-off-by: Marc Kleine-Budde

Merge tag 'clk' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2012-01-09T22:44:15Z

clock management changes for i.MX Another simple series related to clock management, this time only for imx. * tag 'clk' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: mxs: select HAVE_CLK_PREPARE for clock clk: add config option HAVE_CLK_PREPARE into Kconfig ASoC: mxs-saif: convert to clk_prepare/clk_unprepare video: mxsfb: convert to clk_prepare/clk_unprepare serial: mxs-auart: convert to clk_prepare/clk_unprepare net: flexcan: convert to clk_prepare/clk_unprepare mtd: gpmi-lib: convert to clk_prepare/clk_unprepare mmc: mxs-mmc: convert to clk_prepare/clk_unprepare dma: mxs-dma: convert to clk_prepare/clk_unprepare net: fec: add clk_prepare/clk_unprepare ARM: mxs: convert platform code to clk_prepare/clk_unprepare clk: add helper functions clk_prepare_enable and clk_disable_unprepare Fix up trivial conflicts in drivers/net/ethernet/freescale/fec.c due to commit 0ebafefcaa7a ("net: fec: add clk_prepare/clk_unprepare") clashing trivially with commit e163cc97f9ac ("net/fec: fix the .remove code").

Merge branch 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2012-01-07T20:03:30Z

* 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (73 commits) arm: fix up some samsung merge sysdev conversion problems firmware: Fix an oops on reading fw_priv->fw in sysfs loading file Drivers:hv: Fix a bug in vmbus_driver_unregister() driver core: remove __must_check from device_create_file debugfs: add missing #ifdef HAS_IOMEM arm: time.h: remove device.h #include driver-core: remove sysdev.h usage. clockevents: remove sysdev.h arm: convert sysdev_class to a regular subsystem arm: leds: convert sysdev_class to a regular subsystem kobject: remove kset_find_obj_hinted() m86k: gpio - convert sysdev_class to a regular subsystem mips: txx9_sram - convert sysdev_class to a regular subsystem mips: 7segled - convert sysdev_class to a regular subsystem sh: dma - convert sysdev_class to a regular subsystem sh: intc - convert sysdev_class to a regular subsystem power: suspend - convert sysdev_class to a regular subsystem power: qe_ic - convert sysdev_class to a regular subsystem power: cmm - convert sysdev_class to a regular subsystem s390: time - convert sysdev_class to a regular subsystem ... Fix up conflicts with 'struct sysdev' removal from various platform drivers that got changed: - arch/arm/mach-exynos/cpu.c - arch/arm/mach-exynos/irq-eint.c - arch/arm/mach-s3c64xx/common.c - arch/arm/mach-s3c64xx/cpu.c - arch/arm/mach-s5p64x0/cpu.c - arch/arm/mach-s5pv210/common.c - arch/arm/plat-samsung/include/plat/cpu.h - arch/powerpc/kernel/sysfs.c and fix up cpu_is_hotpluggable() as per Greg in include/linux/cpu.h