linux/drivers/net/bonding, branch v3.3

bonding: fix enslaving in alb mode when link down

2012-01-19T01:59:53Z

bond_alb_init_slave() is called from bond_enslave() and sets the slave's MAC address. This is done differently for TLB and ALB modes. bond->alb_info.rlb_enabled is used to discriminate between the two modes but this flag may be uninitialized if the slave is being enslaved prior to calling bond_open() -> bond_alb_initialize() on the master. It turns out all the callers of alb_set_slave_mac_addr() pass bond->alb_info.rlb_enabled as the hw parameter. This patch cleans up the unnecessary parameter of alb_set_slave_mac_addr() and makes the function decide based on the bonding mode instead, which fixes the above problem. Reported-by: Narendra K Signed-off-by: Jiri Bohac Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller

bond_alb: don't disable softirq under bond_alb_xmit

2012-01-11T20:52:26Z

No need to lock soft irqs under bond_alb_xmit() which already has softirq disabled. Changes: 1. add non-bh/bh version to tlb_clear_slave() 2. represent BH and non BH hash table locks _lock_rx_hashtbl_bh/_unlock_rx_hashtbl_bh _lock_rx_hashtbl/_unlock_rx_hashtbl _lock_tx_hashtbl_bh/_unlock_tx_hashtbl_bh _lock_tx_hashtbl/_unlock_tx_hashtbl Signed-off-by: Maxim Uvarov Signed-off-by: Cong Wang Signed-off-by: David S. Miller

Merge branch 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2012-01-07T20:03:30Z

* 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (73 commits) arm: fix up some samsung merge sysdev conversion problems firmware: Fix an oops on reading fw_priv->fw in sysfs loading file Drivers:hv: Fix a bug in vmbus_driver_unregister() driver core: remove __must_check from device_create_file debugfs: add missing #ifdef HAS_IOMEM arm: time.h: remove device.h #include driver-core: remove sysdev.h usage. clockevents: remove sysdev.h arm: convert sysdev_class to a regular subsystem arm: leds: convert sysdev_class to a regular subsystem kobject: remove kset_find_obj_hinted() m86k: gpio - convert sysdev_class to a regular subsystem mips: txx9_sram - convert sysdev_class to a regular subsystem mips: 7segled - convert sysdev_class to a regular subsystem sh: dma - convert sysdev_class to a regular subsystem sh: intc - convert sysdev_class to a regular subsystem power: suspend - convert sysdev_class to a regular subsystem power: qe_ic - convert sysdev_class to a regular subsystem power: cmm - convert sysdev_class to a regular subsystem s390: time - convert sysdev_class to a regular subsystem ... Fix up conflicts with 'struct sysdev' removal from various platform drivers that got changed: - arch/arm/mach-exynos/cpu.c - arch/arm/mach-exynos/irq-eint.c - arch/arm/mach-s3c64xx/common.c - arch/arm/mach-s3c64xx/cpu.c - arch/arm/mach-s5p64x0/cpu.c - arch/arm/mach-s5pv210/common.c - arch/arm/plat-samsung/include/plat/cpu.h - arch/powerpc/kernel/sysfs.c and fix up cpu_is_hotpluggable() as per Greg in include/linux/cpu.h

Merge branch 'driver-core-next' into Linux 3.2

2012-01-06T19:42:52Z

This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file, and it fixes the build error in the arch/x86/kernel/microcode_core.c file, that the merge did not catch. The microcode_core.c patch was provided by Stephen Rothwell who was invaluable in the merge issues involved with the large sysdev removal process in the driver-core tree. Signed-off-by: Greg Kroah-Hartman

bonding: fix error handling if slave is busy (v2)

2012-01-03T17:49:16Z

If slave device already has a receive handler registered, then the error unwind of bonding device enslave function is broken. The following will leave a pointer to freed memory in the slave device list, causing a later kernel panic. # modprobe dummy # ip li add dummy0-1 link dummy0 type macvlan # modprobe bonding # echo +dummy0 >/sys/class/net/bond0/bonding/slaves The fix is to detach the slave (which removes it from the list) in the unwind path. Signed-off-by: Stephen Hemminger Reviewed-by: Nicolas de Pesloüan Signed-off-by: David S. Miller

driver-core: remove sysdev.h usage.

2011-12-22T00:26:03Z

The sysdev.h file should not be needed by any in-kernel code, so remove the .h file from these random files that seem to still want to include it. The sysdev code will be going away soon, so this include needs to be removed no matter what. Cc: Jiandong Zheng Cc: Scott Branden Cc: Russell King Cc: Kukjin Kim Cc: David Brown Cc: Daniel Walker Cc: Bryan Huntsman Cc: Ben Dooks Cc: Wan ZongShun Cc: Haavard Skinnemoen Cc: Hans-Christian Egtvedt Cc: Guan Xuetao Cc: "Venkatesh Pallipadi Cc: Thomas Gleixner Cc: Ingo Molnar Cc: "H. Peter Anvin" Cc: Grant Likely Cc: Richard Purdie Cc: Matthew Garrett Signed-off-by: Kay Sievers

net: introduce vlan_vid_[add/del] and use them instead of direct [add/kill]_vid ndo calls

2011-12-09T00:52:42Z

This patch adds wrapper for ndo_vlan_rx_add_vid/ndo_vlan_rx_kill_vid functions. Check for NETIF_F_HW_VLAN_FILTER feature is done in this wrapper. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller

net: make vlan ndo_vlan_rx_[add/kill]_vid return error value

2011-12-09T00:52:37Z

Let caller know the result of adding/removing vlan id to/from vlan filter. In some drivers I make those functions to just return 0. But in those where there is able to see if hw setup went correctly, return value is set appropriately. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2011-12-02T18:49:21Z

bonding: only use primary address for ARP

2011-12-01T03:59:11Z

Only use the primary address of the bond device for master_ip. This will prevent changing the ARP source address in Active-Backup mode whenever a secondry address is added to the bond device. Signed-off-by: Henrik Saavedra Persson Signed-off-by: Andy Gospodarek Signed-off-by: David S. Miller