linux/drivers/mtd/devices, branch v3.0.86

mtd: slram: invalid checking of absolute end address

2012-12-03T20:59:13Z

commit c36a7ff4578ab6294885aef5ef241aeec4cdb1f0 upstream. Fixed parsing end absolute address. Signed-off-by: Jiri Engelthaler Signed-off-by: Artem Bityutskiy Signed-off-by: Greg Kroah-Hartman

mtd: m25p80: set writebufsize

2012-04-13T15:14:05Z

commit b54f47c8bcfc5f766bf13ec31bd7dd1d4726d33b upstream. Using UBI on m25p80 can give messages like: UBI error: io_init: bad write buffer size 0 for 1 min. I/O unit We need to initialize writebufsize; I think "page_size" is the correct "bufsize", although I'm not sure. Comments? Signed-off-by: Brian Norris Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse Signed-off-by: Greg Kroah-Hartman

mtd: lart: initialize writebufsize

2012-04-13T15:14:05Z

commit fcc44a07dae0af16e84e93425fc8afe642ddc603 upstream. The writebufsize concept was introduce by commit "0e4ca7e mtd: add writebufsize field to mtd_info struct" and it represents the maximum amount of data the device writes to the media at a time. This is an important parameter for UBIFS which is used during recovery and which basically defines how big a corruption caused by a power cut can be. Set writebufsize to 4 because this drivers writes at max 4 bytes at a time. Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse Signed-off-by: Greg Kroah-Hartman

mtd: block2mtd: initialize writebufsize

2012-04-13T15:14:05Z

commit b604387411ec6a072e95910099262616edd2bd2f upstream. The writebufsize concept was introduce by commit "0e4ca7e mtd: add writebufsize field to mtd_info struct" and it represents the maximum amount of data the device writes to the media at a time. This is an important parameter for UBIFS which is used during recovery and which basically defines how big a corruption caused by a power cut can be. However, we forgot to set this parameter for block2mtd. Set it to PAGE_SIZE because this is actually the amount of data we write at a time. Signed-off-by: Artem Bityutskiy Acked-by: Joern Engel Signed-off-by: David Woodhouse Signed-off-by: Greg Kroah-Hartman

mtd: sst25l: initialize writebufsize

2012-04-13T15:14:05Z

commit c4cc625ea5958d065c21cc0fcea29e9ed8f3d2bc upstream. The writebufsize concept was introduce by commit "0e4ca7e mtd: add writebufsize field to mtd_info struct" and it represents the maximum amount of data the device writes to the media at a time. This is an important parameter for UBIFS which is used during recovery and which basically defines how big a corruption caused by a power cut can be. Set writebufsize to the flash page size because it is the maximum amount of data it writes at a time. Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse Signed-off-by: Greg Kroah-Hartman

mtd: convert remaining users to mtd_device_register()

2011-05-25T01:25:00Z

The older add_mtd_device()/add_mtd_partitions() and their removal counterparts will soon be gone. Replace uses with mtd_device_register() and mtd_device_unregister(). Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse

mtd: sst25l: convert to mtd_device_register()

2011-05-25T01:21:33Z

Convert to mtd_device_register() and remove the check for mtd_has_partitions() as we always have partitioning enabled now. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse

mtd: dataflash: convert to mtd_device_register()

2011-05-25T01:21:30Z

Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse

mtd: m25p80: convert to mtd_device_register()

2011-05-25T01:21:24Z

mtd: sst25l: fix section markings

2011-05-25T01:02:57Z

The previous section mismatch fix for this driver wasn't entirely correct. The sst25l_flash_info array is now used in the devinit probe func, but is marked as initdata, so building results in the warning: WARNING: drivers/mtd/devices/sst25l.o(.devinit.text): Section mismatch in reference from the function sst25l_probe() to the variable .init.data:sst25l_flash_info Further, the remove func should be devexit rather than exit to match the probe func. Signed-off-by: Mike Frysinger Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse