linux/drivers/mfd, branch v3.0.23

mfd: Turn on the twl4030-madc MADC clock

2012-01-06T22:14:11Z

commit 3d6271f92e98094584fd1e609a9969cd33e61122 upstream. Without turning the MADC clock on, no MADC conversions occur. $ cat /sys/class/hwmon/hwmon0/device/in8_input [ 53.428436] twl4030_madc twl4030_madc: conversion timeout! cat: read error: Resource temporarily unavailable Signed-off-by: Kyle Manna Signed-off-by: Samuel Ortiz Signed-off-by: Greg Kroah-Hartman

mfd: Check for twl4030-madc NULL pointer

2012-01-06T22:14:11Z

commit d0e84caeb4cd535923884735906e5730329505b4 upstream. If the twl4030-madc device wasn't registered, and another device, such as twl4030-madc-hwmon, calls twl4030_madc_conversion() a NULL pointer is dereferenced. Signed-off-by: Kyle Manna Signed-off-by: Samuel Ortiz Signed-off-by: Greg Kroah-Hartman

mfd: Copy the device pointer to the twl4030-madc structure

2012-01-06T22:14:11Z

commit 66cc5b8e50af87b0bbd0f179d76d2826f4549c13 upstream. Worst case this fixes the following error: [ 72.086212] (NULL device *): conversion timeout! Best case it prevents a crash Signed-off-by: Kyle Manna Signed-off-by: Samuel Ortiz

mfd: Fix mismatch in twl4030 mutex lock-unlock

2012-01-06T22:14:10Z

commit e178ccb33569da17dc897a08a3865441b813bdfb upstream. A mutex is locked on entry into twl4030_madc_conversion(). Immediate return on some error conditions leaves the mutex locked. This patch ensures that mutex is always unlocked before leaving the function. Signed-off-by: Sanjeev Premi Cc: Keerthy Signed-off-by: Samuel Ortiz Signed-off-by: Greg Kroah-Hartman

mfd: Fix twl-core oops while calling twl_i2c_* for unbound driver

2012-01-06T22:13:53Z

commit 8653be1afd60d6e8c36139b487e375b70357d9ef upstream. Check inuse variable before trying to access twl_map to prevent dereferencing of uninitialized variable. Signed-off-by: Ilya Yanok Signed-off-by: Samuel Ortiz Signed-off-by: Greg Kroah-Hartman

revert "mfd: Fix twl4030 dependencies for audio codec"

2011-12-09T16:52:35Z

This reverts commit 11b8fc6ae54bf18a48c94e181c37ca135b858b42, which was commit f09ee0451a44a4e913a7c3cec3805508f7de6c54 upstream. Koen Kooi reports that this shouldn't have been applied to the 3.0 kernel as it isn't relevant there, only 3.1. Reported-by: Koen Kooi Cc: Thomas Weber Cc: Peter Ujfalusi Cc: Samuel Ortiz Cc: Jarkko Nikula Signed-off-by: Greg Kroah-Hartman

mfd: Fix twl4030 dependencies for audio codec

2011-11-21T22:31:23Z

commit f09ee0451a44a4e913a7c3cec3805508f7de6c54 upstream. The codec for Devkit8000 (TWL4030) was not detected except when build with CONFIG_SND_SOC_ALL_CODECS. twl-core.c still uses the CONFIG_TWL4030_CODEC for twl_has_codec(). In commit 57fe7251f5bfc4332f24479376de48a1e8ca6211 the CONFIG_TWL4030_CODEC was renamed into CONFIG_MFD_TWL4030_AUDIO, thatswhy the codec was not detected. This patch renames the CONFIG_ TWL4030_CODEC into CONFIG_MFD_TWL4030_AUDIO in twl-core.c. Signed-off-by: Thomas Weber Acked-by: Peter Ujfalusi Signed-off-by: Samuel Ortiz Cc: Jarkko Nikula Signed-off-by: Greg Kroah-Hartman

mfd: Make omap-usb-host TLL mode work again

2011-10-03T18:40:27Z

commit e600cffe618ff0da29ae1f8b8d3824ce0e2409fc upstream. This code section seems to have been accidentally copy pasted. It causes incorrect bits to be set up in the TLL_CHANNEL_CONF register and prevents the TLL mode from working correctly. Signed-off-by: Anand Gadiyar Cc: Keshava Munegowda Acked-by: Felipe Balbi Signed-off-by: Samuel Ortiz Signed-off-by: Greg Kroah-Hartman

mfd: Fix initialisation of tps65910 interrupts

2011-10-03T18:40:27Z

commit fa948761e685fb03823b3029e5b6bdb52229d6ce upstream. Fix regression introduced by commit a2974732ca7614aaf0baf9d6dd3ad893d50ce1c5 (TPS65911: Add new irq definitions) which caused irq_num to be incorrectly set for tps65910. Signed-off-by: Johan Hovold Acked-by: Graeme Gregory Signed-off-by: Samuel Ortiz Signed-off-by: Greg Kroah-Hartman

w1: ds1wm: add a reset recovery parameter

2011-07-09T04:14:44Z

This fixes a regression in 3.0 reported by Paul Parsons regarding the removal of the msleep(1) in the ds1wm_reset() function: : The linux-3.0-rc4 DS1WM 1-wire driver is logging "bus error, retrying" : error messages on an HP iPAQ hx4700 PDA (XScale-PXA270): : : : Driver for 1-wire Dallas network protocol. : DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko : 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko : ds1wm ds1wm: pass: 1 bus error, retrying : ds1wm ds1wm: pass: 2 bus error, retrying : ds1wm ds1wm: pass: 3 bus error, retrying : ds1wm ds1wm: pass: 4 bus error, retrying : ds1wm ds1wm: pass: 5 bus error, retrying : ... : : The visible result is that the battery charging LED is erratic; sometimes : it works, mostly it doesn't. : : The linux-2.6.39 DS1WM 1-wire driver worked OK. I haven't tried 3.0-rc1, : 3.0-rc2, or 3.0-rc3. This sleep should not be required on normal circuitry provided the pull-ups on the bus are correctly adapted to the slaves. Unfortunately, this is not always the case. The sleep is restored but as a parameter to the probe function in the pdata. [akpm@linux-foundation.org: coding-style fixes] Reported-by: Paul Parsons Tested-by: Paul Parsons Signed-off-by: Jean-François Dagenais Cc: Evgeniy Polyakov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds