linux/drivers/mfd/Makefile, branch v3.14.3

mfd: Add LP3943 MFD driver

2014-01-21T08:27:59Z

LP3943 has 16 output pins which can be used as GPIO expander and PWM generator. * Regmap I2C interface for R/W LP3943 registers * Atomic operations for output pin assignment The driver should check whether requested pin is available or not. If the pin is already used, pin request returns as a failure. A driver data, 'pin_used' is checked when gpio_request() and pwm_request() are called. If the pin is available, then pin_used is set. And it is cleared when gpio_free() and pwm_free(). * Device tree support Compatible strings for GPIO and PWM driver. LP3943 platform data is PWM related, so parsing the device tree is implemented in the PWM driver. Signed-off-by: Milo Kim Signed-off-by: Lee Jones

mfd: max14577: Add max14577 MFD driver core

2014-01-21T08:13:36Z

This patch adds max14577 core/irq driver to support MUIC(Micro USB IC) device and charger device and support irq domain method to control internal interrupt of max14577 device. Also, this patch supports DT binding with max14577_i2c_parse_dt(). The MAXIM 14577 chip contains Micro-USB Interface Circuit and Li+ Battery Charger. It contains accessory and USB charger detection logic. It supports USB 2.0 Hi-Speed, UART and stereo audio signals over Micro-USB connector. The battery charger is compliant with the USB Battery Charging Specification Revision 1.1. It has also SFOUT LDO output for powering USB devices. Reviewed-by: Mark Brown Signed-off-by: Chanwoo Choi Signed-off-by: Krzysztof Kozlowski Signed-off-by: Kyungmin Park Signed-off-by: Lee Jones

mfd: Add support for ams AS3722 PMIC

2013-10-23T15:22:33Z

The ams AS3722 is a compact system PMU suitable for mobile phones, tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down controller, 11 LDOs, RTC, automatic battery, temperature and over-current monitoring, 8 GPIOs, ADC and a watchdog. Add MFD core driver for the AS3722 to support core functionality. Acked-by: Stephen Warren Signed-off-by: Laxman Dewangan Signed-off-by: Florian Lobmaier Signed-off-by: Lee Jones

mfd: Add STw481x driver

2013-10-23T15:21:12Z

This adds a driver for the STw481x PMICs found in the Nomadik family of platforms. This one uses pure device tree probing. Print some of the OTP registers on boot and register a regulator MFD child. Signed-off-by: Linus Walleij Signed-off-by: Lee Jones

mfd: da9063: Add IRQ support

2013-08-20T01:16:00Z

This patch adds a regmap irqchip for DA9063 IRQs. It depends on git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap.git tags/regmap-irq-ack-mask Signed-off-by: Krystian Garbaciak Signed-off-by: Philipp Zabel Reviewed-by: Mark Brown Signed-off-by: Samuel Ortiz

mfd: da9063: Add Dialog DA9063 core driver

2013-08-20T01:15:52Z

This is MFD module providing access to registers and interrupts of DA906x series PMIC. It is used by other functional modules, registered as MFD cells. Driver uses regmap with paging to access extended register list. Register map is divided into two pages, where the second page is used during initialisation. This module provides support to following functional cells: - Regulators - RTC - HWMON - OnKey (power key misc input device) - Vibration (force-feedback input device) - Watchdog - LEDs Signed-off-by: Krystian Garbaciak Signed-off-by: Philipp Zabel Reviewed-by: Mark Brown Signed-off-by: Samuel Ortiz

mfd: Kontron PLD mfd driver

2013-06-24T11:48:22Z

Add core MFD driver for the on-board PLD found on some Kontron embedded modules. The PLD device may provide functions like watchdog, GPIO, UART and I2C bus. The following modules are supported: * COMe-bIP# * COMe-bPC2 (ETXexpress-PC) * COMe-bSC# (ETXexpress-SC T#) * COMe-cCT6 * COMe-cDC2 (microETXexpress-DC) * COMe-cPC2 (microETXexpress-PC) * COMe-mCT10 * ETX-OH Originally-From: Michael Brunner Signed-off-by: Kevin Strasser Acked-by: Guenter Roeck Acked-by: Darren Hart Acked-by: Thomas Gleixner Signed-off-by: Samuel Ortiz

mfd: arizona: Integrate wm8997 into Arizona mfd

2013-06-17T22:49:52Z

The wm8997 is a compact, high-performance audio hub CODEC with SLIMbus interfacing, for smartphones, tablets and other portable audio devices based on the Arizona platform. This patch integrates the wm8997 into the Arizona mfd. Signed-off-by: Charles Keepax Signed-off-by: Samuel Ortiz

mfd: Move ssbi driver into drivers/mfd

2013-06-11T17:27:51Z

There is no reason for ssbi to have its own top-level driver directory when the only users of this interface are all MFD drivers. The only mainline driver using it at the moment (PM8921) is marked broken and in fact does not compile. I have verified that fixing the trivial build breakage in pm8921 links in the new ssbi code just fine, but that can be a separate patch. Signed-off-by: Arnd Bergmann Acked-by: Greg Kroah-Hartman Acked-by: Nicolas Pitre Acked-by: David Brown Signed-off-by: Samuel Ortiz

mfd: si476x: Add header files and Kbuild plumbing

2013-04-19T16:38:13Z

This patch adds all necessary header files and Kbuild plumbing for the core driver for Silicon Laboratories Si476x series of AM/FM tuner chips. The driver as a whole is implemented as an MFD device and this patch adds a core portion of it that provides all the necessary functionality to the two other drivers that represent radio and audio codec subsystems of the chip. Acked-by: Hans Verkuil Acked-by: Sam Ravnborg Signed-off-by: Andrey Smirnov Signed-off-by: Samuel Ortiz