linux/drivers/memory, branch v3.15-rc7

memory: mvebu-devbus: fix the conversion of the bus width

2014-04-17T04:14:30Z

According to the Armada 370 and Armada XP datasheets, the part of the Device Bus register that configure the bus width should contain 0 for a 8 bits bus width, and 1 for a 16 bits bus width (other values are unsupported/reserved). However, the current conversion done in the driver to convert from a bus width in bits to the value expected by the register leads to setting the register to 1 for a 8 bits bus, and 2 for a 16 bits bus. This mistake was compensated by a mistake in the existing Device Tree files for Armada 370/XP platforms: they were declaring a 8 bits bus width, while the hardware in fact uses a 16 bits bus width. This commit fixes that by adjusting the conversion logic. This patch fixes a bug that was introduced in 3edad321b1bd2e6c8b5f38146c115c8982438f06 ('drivers: memory: Introduce Marvell EBU Device Bus driver'), which was merged in v3.11. Signed-off-by: Thomas Petazzoni Link: https://lkml.kernel.org/r/1397489361-5833-2-git-send-email-thomas.petazzoni@free-electrons.com Fixes: 3edad321b1bd ('drivers: memory: Introduce Marvell EBU Device Bus driver') Cc: stable@vger.kernel.org # v3.11+ Acked-by: Ezequiel Garcia Acked-by: Gregory CLEMENT Signed-off-by: Jason Cooper

memory: ti-aemif: introduce AEMIF driver

2014-03-01T00:47:21Z

Add new AEMIF driver for EMIF16 Texas Instruments controller. The EMIF16 module is intended to provide a glue-less interface to a variety of asynchronous memory devices like ASRA M, NOR and NAND memory. A total of 256M bytes of any of these memories can be accessed at any given time via 4 chip selects with 64M byte access per chip select. Synchronous memories such as DDR1 SD RAM, SDR SDRAM and Mobile SDR are not supported. This controller is used on SoCs like Davinci, Keysone2 Acked-by: Santosh Shilimkar Signed-off-by: Murali Karicheri Signed-off-by: Ivan Khoronzhuk Signed-off-by: Greg Kroah-Hartman

powerpc: select MEMORY for FSL_IFC to not break existing .config files

2014-02-28T23:27:10Z

commit d2ae2e20fbdde5a65f3a5a153044ab1e5c53f7cc ("driver/memory:Move Freescale IFC driver to a common driver") introduces this build regression into the mpc85xx_defconfig: drivers/built-in.o: In function `fsl_ifc_nand_remove': drivers/mtd/nand/fsl_ifc_nand.c:1147: undefined reference to `fsl_ifc_ctrl_dev' drivers/mtd/nand/fsl_ifc_nand.c:1147: undefined reference to `fsl_ifc_ctrl_dev' drivers/built-in.o: In function `fsl_ifc_nand_probe': drivers/mtd/nand/fsl_ifc_nand.c:1031: undefined reference to `fsl_ifc_ctrl_dev' drivers/mtd/nand/fsl_ifc_nand.c:1031: undefined reference to `fsl_ifc_ctrl_dev' drivers/built-in.o: In function `match_bank': drivers/mtd/nand/fsl_ifc_nand.c:1013: undefined reference to `convert_ifc_address' drivers/built-in.o: In function `fsl_ifc_nand_probe': drivers/mtd/nand/fsl_ifc_nand.c:1059: undefined reference to `fsl_ifc_ctrl_dev' drivers/mtd/nand/fsl_ifc_nand.c:1080: undefined reference to `fsl_ifc_ctrl_dev' drivers/mtd/nand/fsl_ifc_nand.c:1069: undefined reference to `fsl_ifc_ctrl_dev' drivers/mtd/nand/fsl_ifc_nand.c:1069: undefined reference to `fsl_ifc_ctrl_dev' make: *** [vmlinux] Error 1 This happens because there is nothing to descend us into the drivers/memory directory in the mpc85xx_defconfig. It wasn't selecting CONFIG_MEMORY. So we never built drivers/memory/fsl_ifc.o and so we have nothing to link the above symbols against. Since the goal of the original commit was to relocate the driver to an arch independent location, it only makes sense to relocate the Kconfig setting there as well. But that alone won't fix the build failure; for that we ensure whoever selects FSL_IFC also selects MEMORY. Cc: Prabhakar Kushwaha Cc: Scott Wood Cc: Arnd Bergmann Cc: David Woodhouse Cc: Greg Kroah-Hartman Signed-off-by: Paul Gortmaker Signed-off-by: Greg Kroah-Hartman

driver/memory:Move Freescale IFC driver to a common driver

2014-02-18T20:20:45Z

Freescale IFC controller has been used for mpc8xxx. It will be used for ARM-based SoC as well. This patch moves the driver to driver/memory and fix the header file includes. Also remove module_platform_driver() and instead call platform_driver_register() from subsys_initcall() to make sure this module has been loaded before MTD partition parsing starts. Signed-off-by: Prabhakar Kushwaha Acked-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2013-09-06T20:30:06Z

Pull ARM SoC platform changes from Olof Johansson: "This branch contains mostly additions and changes to platform enablement and SoC-level drivers. Since there's sometimes a dependency on device-tree changes, there's also a fair amount of those in this branch. Pieces worth mentioning are: - Mbus driver for Marvell platforms, allowing kernel configuration and resource allocation of on-chip peripherals. - Enablement of the mbus infrastructure from Marvell PCI-e drivers. - Preparation of MSI support for Marvell platforms. - Addition of new PCI-e host controller driver for Tegra platforms - Some churn caused by sharing of macro names between i.MX 6Q and 6DL platforms in the device tree sources and header files. - Various suspend/PM updates for Tegra, including LP1 support. - Versatile Express support for MCPM, part of big little support. - Allwinner platform support for A20 and A31 SoCs (dual and quad Cortex-A7) - OMAP2+ support for DRA7, a new Cortex-A15-based SoC. The code that touches other architectures are patches moving MSI arch-specific functions over to weak symbols and removal of ARCH_SUPPORTS_MSI, acked by PCI maintainers" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits) tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list ARM: dts: vf610-twr: enable i2c0 device ARM: dts: i.MX51: Add one more I2C2 pinmux entry ARM: dts: i.MX51: Move pins configuration under "iomuxc" label ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX ARM: dts: i.MX27: Disable AUDMUX in the template ARM: dts: wandboard: Add support for SDIO bcm4329 ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template ARM: dts: imx53-qsb: Make USBH1 functional ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module ARM: dts: imx6qdl-sabresd: Add touchscreen support ARM: imx: add ocram clock for imx53 ARM: dts: imx: ocram size is different between imx6q and imx6dl ARM: dts: imx27-phytec-phycore-som: Fix regulator settings ARM: dts: i.MX27: Remove clock name from CPU node ...

tegra: simplify use of devm_ioremap_resource

2013-08-15T22:04:42Z

Remove unneeded error handling on the result of a call to platform_get_resource when the value is passed to devm_ioremap_resource. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @@ expression pdev,res,n,e,e1; expression ret != 0; identifier l; @@ - res = platform_get_resource(pdev, IORESOURCE_MEM, n); ... when != res - if (res == NULL) { ... \(goto l;\|return ret;\) } ... when != res + res = platform_get_resource(pdev, IORESOURCE_MEM, n); e = devm_ioremap_resource(e1, res); // Signed-off-by: Julia Lawall Signed-off-by: Stephen Warren

memory: mvebu-devbus: Remove unused variable

2013-08-12T16:43:28Z

This variable is not being used anywhere and it's only forgotten garbage that should have been removed in the previous commit: commit 9b6e4c0a58e24c28bd757c9365824a37e80b751c Author: Ezequiel Garcia Date: Fri Jul 26 10:17:38 2013 -0300 memory: mvebu-devbus: Remove address decoding window workaround Signed-off-by: Ezequiel Garcia Signed-off-by: Jason Cooper

memory: mvebu-devbus: Remove address decoding window workaround

2013-08-06T14:09:57Z

Now that mbus device tree binding has been introduced, remove the address decoding window management from this driver. A suitable 'ranges' entry should be added to the devbus-compatible node in the device tree, as described by the mbus binding documentation. Acked-by: Greg Kroah-Hartman Signed-off-by: Ezequiel Garcia Tested-by: Andrew Lunn Tested-by: Sebastian Hesselbarth Signed-off-by: Jason Cooper

memory: tegra30-mc: Fix IRQ handler.

2013-06-17T23:46:06Z

In Tegra30 any memory controller interrupt would cause an infinite loop in the IRQ handler. Additionally, a garbage pointer was used to read the MC status registers, which causes wrong values to be printed if a MC error occurred. Signed-off-by: Tuomas Tynkkynen Reviewed-by: Stephen Warren Reviewed-by: Thierry Reding Signed-off-by: Greg Kroah-Hartman

memory: tegra20-mc: Fix hang in IRQ handler.

2013-06-17T23:46:06Z

In Tegra20 any memory controller interrupt would cause an infinite loop in the IRQ handler. Signed-off-by: Tuomas Tynkkynen Reviewed-by: Stephen Warren Reviewed-by: Thierry Reding Signed-off-by: Greg Kroah-Hartman