linux/drivers/isdn, branch v3.0.30

net: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared

2011-08-16T01:31:38Z

[ Upstream commit 550fd08c2cebad61c548def135f67aba284c6162 ] After the last patch, We are left in a state in which only drivers calling ether_setup have IFF_TX_SKB_SHARING set (we assume that drivers touching real hardware call ether_setup for their net_devices and don't hold any state in their skbs. There are a handful of drivers that violate this assumption of course, and need to be fixed up. This patch identifies those drivers, and marks them as not being able to support the safe transmission of skbs by clearning the IFF_TX_SKB_SHARING flag in priv_flags Signed-off-by: Neil Horman CC: Karsten Keil CC: "David S. Miller" CC: Jay Vosburgh CC: Andy Gospodarek CC: Patrick McHardy CC: Krzysztof Halasa CC: "John W. Linville" CC: Greg Kroah-Hartman CC: Marcel Holtmann CC: Johannes Berg Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

gigaset: call module_put before restart of if_open()

2011-06-17T19:27:32Z

if_open() calls try_module_get(), and after an attempt to lock a mutex the if_open() function may return -ERESTARTSYS without putting the module. Then, when if_open() is executed again, try_module_get() is called making the reference counter of THIS_MODULE greater than one at successful exit from if_open(). The if_close() function puts the module only once, and as a result it can't be unloaded. This patch adds module_put call before the return from if_open(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Pavel Shved Signed-off-by: David S. Miller

ISDN, hfcsusb: Don't leak in hfcsusb_ph_info()

2011-06-12T01:59:07Z

We leak the memory allocated to 'phi' when the variable goes out of scope in hfcsusb_ph_info(). Signed-off-by: Jesper Juhl Signed-off-by: David S. Miller

Revert "tty: make receive_buf() return the amout of bytes received"

2011-06-03T21:33:24Z

This reverts commit b1c43f82c5aa265442f82dba31ce985ebb7aa71c. It was broken in so many ways, and results in random odd pty issues. It re-introduced the buggy schedule_work() in flush_to_ldisc() that can cause endless work-loops (see commit a5660b41af6a: "tty: fix endless work loop when the buffer fills up"). It also used an "unsigned int" return value fo the ->receive_buf() function, but then made multiple functions return a negative error code, and didn't actually check for the error in the caller. And it didn't actually work at all. BenH bisected down odd tty behavior to it: "It looks like the patch is causing some major malfunctions of the X server for me, possibly related to PTYs. For example, cat'ing a large file in a gnome terminal hangs the kernel for -minutes- in a loop of what looks like flush_to_ldisc/workqueue code, (some ftrace data in the quoted bits further down). ... Some more data: It -looks- like what happens is that the flush_to_ldisc work queue entry constantly re-queues itself (because the PTY is full ?) and the workqueue thread will basically loop forver calling it without ever scheduling, thus starving the consumer process that could have emptied the PTY." which is pretty much exactly the problem we fixed in a5660b41af6a. Milton Miller pointed out the 'unsigned int' issue. Reported-by: Benjamin Herrenschmidt Reported-by: Milton Miller Cc: Stefan Bigler Cc: Toby Gray Cc: Felipe Balbi Cc: Greg Kroah-Hartman Cc: Alan Cox Signed-off-by: Linus Torvalds

Merge branch 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6

2011-05-26T20:19:00Z

* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: gfs2: Drop __TIME__ usage isdn/diva: Drop __TIME__ usage atm: Drop __TIME__ usage dlm: Drop __TIME__ usage wan/pc300: Drop __TIME__ usage parport: Drop __TIME__ usage hdlcdrv: Drop __TIME__ usage baycom: Drop __TIME__ usage pmcraid: Drop __DATE__ usage edac: Drop __DATE__ usage rio: Drop __DATE__ usage scsi/wd33c93: Drop __TIME__ usage scsi/in2000: Drop __TIME__ usage aacraid: Drop __TIME__ usage media/cx231xx: Drop __TIME__ usage media/radio-maxiradio: Drop __TIME__ usage nozomi: Drop __TIME__ usage cyclades: Drop __TIME__ usage

isdn/diva: Drop TIME usage

2011-05-26T08:27:51Z

The kernel already prints its build timestamp during boot, no need to repeat it in random drivers and produce different object files each time. Cc: Armin Schindler Cc: netdev@vger.kernel.org Signed-off-by: Michal Marek

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

2011-05-26T00:00:17Z

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (89 commits) bonding: documentation and code cleanup for resend_igmp bonding: prevent deadlock on slave store with alb mode (v3) net: hold rtnl again in dump callbacks Add Fujitsu 1000base-SX PCI ID to tg3 bnx2x: protect sequence increment with mutex sch_sfq: fix peek() implementation isdn: netjet - blacklist Digium TDM400P via-velocity: don't annotate MAC registers as packed xen: netfront: hold RTNL when updating features. sctp: fix memory leak of the ASCONF queue when free asoc net: make dev_disable_lro use physical device if passed a vlan dev (v2) net: move is_vlan_dev into public header file (v2) bug.h: Fix build with CONFIG_PRINTK disabled. wireless: fix fatal kernel-doc error + warning in mac80211.h wireless: fix cfg80211.h new kernel-doc warnings iwlagn: dbg_fixed_rate only used when CONFIG_MAC80211_DEBUGFS enabled dst: catch uninitialized metrics be2net: hash key for rss-config cmd not set bridge: initialize fake_rtable metrics net: fix __dst_destroy_metrics_generic() ... Fix up trivial conflicts in drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c

isdn: netjet - blacklist Digium TDM400P

2011-05-25T21:55:32Z

[2nd try ... 1st attempt didn't make it to netdev mailing list] A quick google search reveals that people with this card are blacklisting it in the initramfs and in the module blacklist based on a statement that it is unsupported. Since the older Digium is also unsupported I'm pretty confident that this newer card is also not supported. lspci -xxx -vv shows 04:07.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface Subsystem: Device b100:0003 P. ----8<---- The Asterisk Voice Card, DIGIUM TDM400P is unsupported by the netjet driver. Blacklist it like the Digium X100P/X101P card. Signed-off-by: Prarit Bhargava Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6

2011-05-24T20:28:35Z

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: Make struct pcmcia_device_id const, sound drivers edition staging: pcmcia: Convert pcmcia_device_id declarations to const pcmcia: Convert pcmcia_device_id declarations to const pcmcia: Make declaration and uses of struct pcmcia_device_id const pcmcia/sa1100: put sa11x0_pcmcia_hw_init[] to .devinit.data

Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6

2011-05-23T19:23:20Z

* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (48 commits) serial: 8250_pci: add support for Cronyx Omega PCI multiserial board. tty/serial: Fix break handling for PORT_TEGRA tty/serial: Add explicit PORT_TEGRA type n_tracerouter and n_tracesink ldisc additions. Intel PTI implementaiton of MIPI 1149.7. Kernel documentation for the PTI feature. export kernel call get_task_comm(). tty: Remove to support serial for S5P6442 pch_phub: Support new device ML7223 8250_pci: Add support for the Digi/IBM PCIe 2-port Adapter ASoC: Update cx20442 for TTY API change pch_uart: Support new device ML7223 IOH parport: Use request_muxed_region for IT87 probe and lock tty/serial: add support for Xilinx PS UART n_gsm: Use print_hex_dump_bytes drivers/tty/moxa.c: Put correct tty value TTY: tty_io, annotate locking functions TTY: serial_core, remove superfluous set_task_state TTY: serial_core, remove invalid test Char: moxa, fix locking in moxa_write ... Fix up trivial conflicts in drivers/bluetooth/hci_ldisc.c and drivers/tty/serial/Makefile. I did the hci_ldisc thing as an evil merge, cleaning things up.