linux/drivers/input, branch v3.0.87

Input: walkera0701 - fix crash on startup

2013-01-11T17:03:38Z

commit a455e2985f57e2a71566bb8850094af38b2c932d upstream. The driver's timer must be set up before enabling IRQ handler, otherwise bad things may happen. Reported-and-tested-by: Fengguang Wu Signed-off-by: Peter Popovec Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

x86, 8042: Enable A20 using KBC to fix S3 resume on some MSI laptops

2013-01-11T17:03:36Z

commit ad68652412276f68ad4fe3e1ecf5ee6880876783 upstream. Some MSI laptop BIOSes are broken - INT 15h code uses port 92h to enable A20 line but resume code assumes that KBC was used. The laptop will not resume from S3 otherwise but powers off after a while and then powers on again stuck with a blank screen. Fix it by enabling A20 using KBC in i8042_platform_init for x86. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=12878 Signed-off-by: Ondrej Zary Cc: Dmitry Torokhov Cc: Alan Cox Cc: Rafael J. Wysocki Link: http://lkml.kernel.org/r/201212112218.06551.linux@rainbow-software.org Signed-off-by: H. Peter Anvin Signed-off-by: Greg Kroah-Hartman

Input: bcm5974 - set BUTTONPAD property

2012-12-03T20:59:16Z

commit 52965cc012f7a3cf35f06485ec275ebf3b3fddae upstream. Some bcm5974 trackpads have a physical button beneath the physical surface. This patch sets the property bit so user space applications can detect the trackpad type and act accordingly. Signed-off-by: Jussi Pakkanen Reviewed-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov Cc: maximilian attems Signed-off-by: Greg Kroah-Hartman

Input: i8042 - disable mux on Toshiba C850D

2012-10-02T16:47:27Z

commit 8669cf6793bb38307a30fb6b9565ddc8840ebd3f upstream. On Toshiba Satellite C850D, the touchpad and the keyboard might randomly not work at boot. Preventing MUX mode activation solves this issue. Signed-off-by: Anisse Astier Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: i8042 - add Gigabyte T1005 series netbooks to noloop table

2012-09-14T17:00:51Z

commit 7b125b94ca16b7e618c6241cb02c4c8060cea5e3 upstream. They all define their chassis type as "Other" and therefore are not categorized as "laptops" by the driver, which tries to perform AUX IRQ delivery test which fails and causes touchpad not working. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42620 Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: wacom - Bamboo One 1024 pressure fix

2012-08-15T19:04:30Z

commit 6dc463511d4a690f01a9248df3b384db717e0b1c upstream. Bamboo One's with ID of 0x6a and 0x6b were added with correct indication of 1024 pressure levels but the Graphire packet routine was only looking at 9 bits. Increased to 10 bits. This bug caused these devices to roll over to zero pressure at half way mark. The other devices using this routine only support 256 or 512 range and look to fix unused bits at zero. Signed-off-by: Chris Bagwell Reported-by: Tushant Mirchandani Reviewed-by: Ping Cheng Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: xpad - add Andamiro Pump It Up pad

2012-07-19T15:58:21Z

commit e76b8ee25e034ab601b525abb95cea14aa167ed3 upstream. I couldn't find the vendor ID in any of the online databases, but this mat has a Pump It Up logo on the top side of the controller compartment, and a disclaimer stating that Andamiro will not be liable on the bottom. Signed-off-by: Yuri Khan Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: ALPS - fix touchpad detection when buttons are pressed

2012-03-12T17:33:00Z

commit 99c90ab31fad855b9da9dee3a5aa6c27f263e9d6 upstream. ALPS touchpad detection fails if some buttons of ALPS are pressed. The reason is that the "E6" query response byte is different from what is expected. This was tested on a Toshiba Portege R500. Signed-off-by: Akio Idehara Tested-by: Seth Forshee Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: synaptics - fix touchpad not working after S2R on Vostro V13

2012-01-06T22:13:49Z

commit 8521478f67e95ada4e87970c7b41e504c724b2cf upstream. Synaptics touchpads on several Dell laptops, particularly Vostro V13 systems, may not respond properly to PS/2 commands and queries immediately after resuming from suspend to RAM. This leads to unresponsive touchpad after suspend/resume cycle. Adding a 1-second delay after resetting the device allows touchpad to finish initializing (calibrating?) and start reacting properly. Reported-by: Daniel Manrique Tested-by: Daniel Manrique Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

input: pmic8xxx-pwrkey: Do not use mfd_get_data()

2011-07-05T08:38:43Z

mfd_get_data() has been removed from the MFD API. Cc: Anirudh Ghayal Signed-off-by: Samuel Ortiz