linux/drivers/input/touchscreen/Kconfig, branch v3.4-rc2

Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2012-03-27T23:03:32Z

Pull "ARM: global cleanups" from Arnd Bergmann: "Quite a bit of code gets removed, and some stuff moved around, mostly the old samsung s3c24xx stuff. There should be no functional changes in this series otherwise. Some cleanups have dependencies on other arm-soc branches and will be sent in the second round. Signed-off-by: Arnd Bergmann " Fixed up trivial conflicts mainly due to #include's being changes on both sides. * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (121 commits) ep93xx: Remove unnecessary includes of ep93xx-regs.h ep93xx: Move EP93XX_SYSCON defines to SoC private header ep93xx: Move crunch code to mach-ep93xx directory ep93xx: Make syscon access functions private to SoC ep93xx: Configure GPIO ports in core code ep93xx: Move peripheral defines to local SoC header ep93xx: Convert the watchdog driver into a platform device. ep93xx: Use ioremap for backlight driver ep93xx: Move GPIO defines to gpio-ep93xx.h ep93xx: Don't use system controller defines in audio drivers ep93xx: Move PHYS_BASE defines to local SoC header file ARM: EXYNOS: Add clock register addresses for EXYNOS4X12 bus devfreq driver ARM: EXYNOS: add clock registers for exynos4x12-cpufreq PM / devfreq: update the name of EXYNOS clock registers that were omitted PM / devfreq: update the name of EXYNOS clock register ARM: EXYNOS: change the prefix S5P_ to EXYNOS4_ for clock ARM: EXYNOS: use static declaration on regarding clock ARM: EXYNOS: replace clock.c for other new EXYNOS SoCs ARM: OMAP2+: Fix build error after merge ARM: S3C24XX: remove call to s3c24xx_setup_clocks ...

Input: ili210x - add support for Ilitek ILI210x based touchscreens

2012-03-17T19:20:44Z

The driver supports chipsets ILI2102, ILI2102s, ILI2103, ILI2103s and ILI2105. Such kind of controllers can be found in Amazon Kindle Fire devices. Reviewed-by: Jan Paesmans Reviewed-by: Henrik Rydberg Signed-off-by: Olivier Sobrie Signed-off-by: Dmitry Torokhov

Input: usbtouchscreen - add support for Data Modul EasyTouch TP 72037

2012-03-04T18:45:13Z

The Data Modul TP 72037 EasyTouch controller is derived from EGALAX controller and is capable of detecting dual contacts. Packets can be 5 bytes or 10 bytes long, depending whether one or two contacts are detected. Format is same as EGALAX touch controller, but with x and y coordinates inverted. Signed-off-by: Armando Visconti Signed-off-by: Viresh Kumar Signed-off-by: Daniel Ritz Signed-off-by: Dmitry Torokhov

Input: add support for TI Touchscreen controller

2012-03-04T16:45:00Z

This patch adds support for TI's touchscreen controller for a 4/5/8 wire resistive panel that is directly fed to the ADC. This touchscreen controller will be part of AM335x TI SoC. The TRM can be found at: http://www.ti.com/lit/ug/spruh73a/spruh73a.pdf Signed-off-by: Patil, Rachna Signed-off-by: Dmitry Torokhov

ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX

2012-03-02T22:44:51Z

This patch changes the ARCH name to "ARCH_S3C24XX" for Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, and S3C2450 SoCs so that we can merge the mach-xxx directories and plat-s3c24xx dir. to just one mach-s3c24xx for them. I think this should be sent to upstream via samsung tree because this touches many samsung stuff. Cc: Dmitry Torokhov Cc: Richard Purdie Cc: Chris Ball Cc: David Woodhouse Cc: Alessandro Zummo Cc: Grant Likely Cc: Greg Kroah-Hartman [for the gadget part:] Acked-by: Felipe Balbi [for the framebuffer (video) part:] Acked-by: Florian Tobias Schandinat [For the watchdog-part:] Acked-by: Wim Van Sebroeck Cc: Sangbeom Kim Cc: Liam Girdwood Cc: Mark Brown Cc: Russell King Signed-off-by: Kukjin Kim

Input: add Cypress TTSP capacitive multi-touch screen support

2012-01-31T08:18:36Z

Cypress TrueTouch(tm) Standard Product controllers are found in a wide range of embedded devices. This driver add support for a variety of TTSP controllers. Since the hardware is capable of tracking identifiable contacts, multi-touch protocol type B (stateful) is used to report contact information. The driver is composed of a core driver that process the data sent by the contacts and a set of bus specific interface modules. This patch adds the base core TTSP driver. Signed-off-by: Javier Martinez Canillas Reviewed-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov

Input: add driver for pixcir i2c touchscreens

2011-12-30T23:25:52Z

This patch adds a driver for PIXCIR's I2C connected touchscreens. Signed-off-by: Jianchun Acked-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov

Input: add driver for AUO In-Cell touchscreens using pixcir ICs

2011-12-28T05:22:18Z

Some displays from AUO have a so called in-cell touchscreen, meaning it is built directly into the display unit. Touchdata is gathered through PIXCIR Tango-ICs and processed in an Atmel ATmega168P with custom firmware. Communication between the host system and ATmega is done via I2C. Devices using this touch solution include the Dell Streak5 and the family of Qisda ebook readers. The driver reports single- and multi-touch events including touch area values. Signed-off-by: Heiko Stuebner Signed-off-by: Dmitry Torokhov

Input: add EETI eGalax I2C capacitive multi touch driver

2011-11-15T17:46:30Z

This patch adds the EETI eGalax serial multi touch controller driver. EETI eGalax serial touch screen controller is a I2C based multiple capacitive touch screen controller, it can support 5 touch events maximum. Signed-off-by: Zhang Jiejing Signed-off-by: Dmitry Torokhov

Input: usbtouchscreen - add ELO IntelliTouch 2700 support

2011-11-05T07:02:27Z

Signed-off-by: Michael Gebetsroither Reviewed-by: Wanlong Gao Signed-off-by: Dmitry Torokhov