linux/drivers/input/serio, branch v3.2.41

x86, 8042: Enable A20 using KBC to fix S3 resume on some MSI laptops

2013-01-03T03:33:36Z

commit ad68652412276f68ad4fe3e1ecf5ee6880876783 upstream. Some MSI laptop BIOSes are broken - INT 15h code uses port 92h to enable A20 line but resume code assumes that KBC was used. The laptop will not resume from S3 otherwise but powers off after a while and then powers on again stuck with a blank screen. Fix it by enabling A20 using KBC in i8042_platform_init for x86. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=12878 Signed-off-by: Ondrej Zary Cc: Dmitry Torokhov Cc: Alan Cox Cc: Rafael J. Wysocki Link: http://lkml.kernel.org/r/201212112218.06551.linux@rainbow-software.org Signed-off-by: H. Peter Anvin Signed-off-by: Ben Hutchings

Input: i8042 - also perform controller reset when suspending

2012-12-06T11:20:13Z

commit 1729ad1f4f9e167ade84ca8b5269695c42351160 upstream. In addition to some laptops needing i8042 reset after resuming from S2R to get their touchpads working there is another class of laptops - ones that need i8042 reset before going to S2R, otherwise they will simply reboot instead of resuming. See https://bugzilla.kernel.org/show_bug.cgi?id=15612 This change forces reset of i8042 before doing S2R. Reported-by: Stefan Koch Tested-by: Alexander van Loon Signed-off-by: Dmitry Torokhov Signed-off-by: Ben Hutchings

Input: i8042 - disable mux on Toshiba C850D

2012-10-10T02:31:00Z

commit 8669cf6793bb38307a30fb6b9565ddc8840ebd3f upstream. On Toshiba Satellite C850D, the touchpad and the keyboard might randomly not work at boot. Preventing MUX mode activation solves this issue. Signed-off-by: Anisse Astier Signed-off-by: Dmitry Torokhov Signed-off-by: Ben Hutchings

Input: i8042 - add Gigabyte T1005 series netbooks to noloop table

2012-09-19T14:04:27Z

commit 7b125b94ca16b7e618c6241cb02c4c8060cea5e3 upstream. They all define their chassis type as "Other" and therefore are not categorized as "laptops" by the driver, which tries to perform AUX IRQ delivery test which fails and causes touchpad not working. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42620 Signed-off-by: Dmitry Torokhov Signed-off-by: Ben Hutchings

Input: ams_delta_serio - include linux/module.h

2011-11-10T05:19:54Z

Fix the following compilation failure with v3.2-rc1 by including module.h: CC drivers/input/serio/ams_delta_serio.o drivers/input/serio/ams_delta_serio.c:33:15: error: expected declaration specifiers or '...' before string constant drivers/input/serio/ams_delta_serio.c:34:20: error: expected declaration specifiers or '...' before string constant drivers/input/serio/ams_delta_serio.c:35:16: error: expected declaration specifiers or '...' before string constant drivers/input/serio/ams_delta_serio.c: In function 'ams_delta_serio_init': drivers/input/serio/ams_delta_serio.c:155:2: error: 'THIS_MODULE' undeclared (first use in this function) drivers/input/serio/ams_delta_serio.c:155:2: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by: Aaro Koskinen Signed-off-by: Dmitry Torokhov

Input: i8042 - add HP Pavilion dv4s to 'notimeout' and 'nomux' blacklists

2011-11-05T07:03:21Z

Touchpad input doesn't work with newer HP Pavilion dv4 laptops due to bad i8042 timeout data. Booting with i8042.notimeout and i8042.nomux successfully works around the problem. This patch adds the devices to the i8042 notimeout and nomux blacklists. Signed-off-by: Tomas Miljenovic Signed-off-by: Dmitry Torokhov

Input: serio_raw - fix memory leak when closing char device

2011-10-11T01:35:23Z

Apparently we never freed memory allocated when users open our char devices nor removed old users from the list of connected clients. Also unregister misc device immediately upon disconnecting the port instead of waiting until last user drops off (refcounting in misc device code will make sure needed pieces stay around while they are needed) and make sure we are not holing holding serio_raw_mutex when registering/unregistering misc device. This should fix potential deadlock between serio_raw and misc device code uncovered by lockdep and reported by Thomas Tuttle. Reviewed-by: Wanlong Gao Signed-off-by: Dmitry Torokhov

Input: serio_raw - kick clients when disconnecting port

2011-10-11T01:35:18Z

Send SIGIO/POLL_HUP and otherwise wake up waiters when corresponding serio port is being disconnected. Also check if port is dead in serio_raw_poll and signal POLLHUP|POLLERR. This should speed up process of releasing dead devices by userspace applications. Reviewed-by: Wanlong Gao Signed-off-by: Dmitry Torokhov

Input: serio_raw - explicitly mark disconnected ports as dead

2011-10-11T01:35:13Z

Instead of relying on setting serio_raw->serio to NULL upon disconnecting ports mark them explicitly as "dead". Also take and carry reference to underlying serio port to make sure it does not go away until we are done with it. Reviewed-by: Wanlong Gao Signed-off-by: Dmitry Torokhov

Input: serio_raw - fix coding style issues

2011-10-11T01:35:10Z

This makes checkpatch.pl happy with the driver Reviewed-by: Wanlong Gao Signed-off-by: Dmitry Torokhov