linux/drivers/input/mouse, branch v3.6

Input: sentelic - filter out erratic movement when lifting finger

2012-09-19T21:58:07Z

When lifing finger off the surface some versions of touchpad send movement packets with very low coordinates, which cause cursor to jump to the upper left corner of the screen. Let's ignore least significant bits of X and Y coordinates if higher bits are all zeroes and consider finger not touching the pad. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43197 Reported-and-tested-by: Aleksey Spiridonov Tested-by: Eddie Dunn Tested-by: Jakub Luzny Tested-by: Olivier Goffart Signed-off-by: Tai-hwa Liang Signed-off-by: Dmitry Torokhov

Merge branch 'next' into for-linus

2012-07-30T05:34:47Z

Prepare second set of changes for 3.6 merge window.

Input: synaptics - handle out of bounds values from the hardware

2012-07-25T06:55:15Z

The touchpad on the Acer Aspire One D250 will report out of range values in the extreme lower portion of the touchpad. These appear as abrupt changes in the values reported by the hardware from very low values to very high values, which can cause unexpected vertical jumps in the position of the mouse pointer. What seems to be happening is that the value is wrapping to a two's compliment negative value of higher resolution than the 13-bit value reported by the hardware, with the high-order bits being truncated. This patch adds handling for these values by converting them to the appropriate negative values. The only tricky part about this is deciding when to treat a number as negative. It stands to reason that if out of range values can be reported on the low end then it could also happen on the high end, so not all out of range values should be treated as negative. The approach taken here is to split the difference between the maximum legitimate value for the axis and the maximum possible value that the hardware can report, treating values greater than this number as negative and all other values as positive. This can be tweaked later if hardware is found that operates outside of these parameters. BugLink: http://bugs.launchpad.net/bugs/1001251 Cc: stable@vger.kernel.org Signed-off-by: Seth Forshee Reviewed-by: Daniel Kurtz Signed-off-by: Dmitry Torokhov

Merge branch 'next' into for-linus

2012-07-25T05:43:04Z

Input: bcm5974 - Add support for 2012 MacBook Pro Retina

2012-07-10T16:45:05Z

Add support for the 15'' MacBook Pro Retina model (MacBookPro10,1). Patch originally written by clipcarl (forums.opensuse.org). Signed-off-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov

Input: synaptics - print firmware ID and board number at init

2012-07-08T01:20:08Z

Read the Firmware ID and Board Number from a synaptics device at init and display them in the system log. Device behavior is very board and firmware dependent. It may prove useful for users to include this information when providing bug reports or other feedback. Signed-off-by: Daniel Kurtz Acked-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov

Input: synaptics_usb - Remove TrackPoint name trailing whitespace

2012-07-07T02:12:17Z

The USB TrackPoint name string contains a space at the trailing end that can cause confusion/difficulty when creating udev rules. Example: "Synaptics Inc. Composite TouchPad / TrackPoint (Stick) " This patch removes the trailing space. Signed-off-by: Bob Ross Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2012-05-24T17:34:29Z

Pull input layer updates from Dmitry Torokhov: - a bunch of new drivers (DA9052/53 touchscreenn controller, Synaptics Navpoint, LM8333 keypads, Wacom I2C touhscreen); - updates to existing touchpad drivers (ALPS, Sntelic); - Wacom driver now supports Intuos5; - device-tree bindings in numerous drivers; - other cleanups and fixes. Fix annoying conflict in drivers/input/tablet/wacom_wac.c that I think implies that the input layer device naming is broken, but let's see. I brough it up with Dmitry. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) Input: matrix-keymap - fix building keymaps Input: spear-keyboard - document DT bindings Input: spear-keyboard - add device tree bindings Input: matrix-keymap - wire up device tree support Input: matrix-keymap - uninline and prepare for device tree support Input: adp5588 - add support for gpio names Input: omap-keypad - dynamically handle register offsets Input: synaptics - fix compile warning MAINTAINERS: adjust input-related patterns Input: ALPS - switch to using input_mt_report_finger_count Input: ALPS - add semi-MT support for v4 protocol Input: Add Synaptics NavPoint (PXA27x SSP/SPI) driver Input: atmel_mxt_ts - dump each message on just 1 line Input: atmel_mxt_ts - do not read extra (checksum) byte Input: atmel_mxt_ts - verify object size in mxt_write_object Input: atmel_mxt_ts - only allow root to update firmware Input: atmel_mxt_ts - use CONFIG_PM_SLEEP Input: sentelic - report device's production serial number Input: tl6040-vibra - Device Tree support Input: evdev - properly handle read/write with count 0 ...

Merge branch 'next' into for-linus

2012-05-24T08:13:01Z

Input: synaptics - fix compile warning

2012-05-11T05:33:49Z

Move synaptics_invert_y() inside CONFIG_MOUSE_PS2_SYNAPTICS to get rid of a compile warning when we don't select synaptics support. drivers/input/mouse/synaptics.c:53:12: warning: ‘synaptics_invert_y’ defined but not used [-Wunused-function] Signed-off-by: JJ Ding Reviewed-by: Daniel Kurtz Signed-off-by: Dmitry Torokhov