linux/drivers/input/mouse, branch v3.10.38

Input: cypress_ps2 - don't report as a button pads

2014-04-03T19:01:04Z

commit 6797b39e6f6f34c74177736e146406e894b9482b upstream. The cypress PS/2 trackpad models supported by the cypress_ps2 driver emulate BTN_RIGHT events in firmware based on the finger position, as part of this no motion events are sent when the finger is in the button area. The INPUT_PROP_BUTTONPAD property is there to indicate to userspace that BTN_RIGHT events should be emulated in userspace, which is not necessary in this case. When INPUT_PROP_BUTTONPAD is advertised userspace will wait for a motion event before propagating the button event higher up the stack, as it needs current abs x + y data for its BTN_RIGHT emulation. Since in the cypress_ps2 pads don't report motion events in the button area, this means that clicks in the button area end up being ignored, so INPUT_PROP_BUTTONPAD actually causes problems for these touchpads, and removing it fixes: https://bugs.freedesktop.org/show_bug.cgi?id=76341 Reported-by: Adam Williamson Tested-by: Adam Williamson Reviewed-by: Peter Hutterer Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: synaptics - add manual min/max quirk for ThinkPad X240

2014-04-03T19:01:04Z

commit 8a0435d958fb36d93b8df610124a0e91e5675c82 upstream. This extends Benjamin Tissoires manual min/max quirk table with support for the ThinkPad X240. Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: synaptics - add manual min/max quirk

2014-04-03T19:01:04Z

commit 421e08c41fda1f0c2ff6af81a67b491389b653a5 upstream. The new Lenovo Haswell series (-40's) contains a new Synaptics touchpad. However, these new Synaptics devices report bad axis ranges. Under Windows, it is not a problem because the Windows driver uses RMI4 over SMBus to talk to the device. Under Linux, we are using the PS/2 fallback interface and it occurs the reported ranges are wrong. Of course, it would be too easy to have only one range for the whole series, each touchpad seems to be calibrated in a different way. We can not use SMBus to get the actual range because I suspect the firmware will switch into the SMBus mode and stop talking through PS/2 (this is the case for hybrid HID over I2C / PS/2 Synaptics touchpads). So as a temporary solution (until RMI4 land into upstream), start a new list of quirks with the min/max manually set. Signed-off-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: elantech - improve clickpad detection

2014-03-31T16:58:14Z

commit c15bdfd5b9831e4cab8cfc118243956e267dd30e upstream. The current assumption in the elantech driver that hw version 3 touchpads are never clickpads and hw version 4 touchpads are always clickpads is wrong. There are several bug reports for this, ie: https://bugzilla.redhat.com/show_bug.cgi?id=1030802 http://superuser.com/questions/619582/right-elantech-touchpad-button-not-working-in-linux I've spend a couple of hours wading through various bugzillas, launchpads and forum posts to create a list of fw-versions and capabilities for different laptop models to find a good method to differentiate between clickpads and versions with separate hardware buttons. Which shows that a device being a clickpad is reliable indicated by bit 12 being set in the fw_version. I've included the gathered list inside the driver, so that we've this info at hand if we need to revisit this later. Signed-off-by: Hans de Goede Reviewed-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov Cc: Josh Boyer Signed-off-by: Greg Kroah-Hartman

Input: cypress_ps2 - do not consider data bad if palm is detected

2013-12-04T18:57:18Z

commit 5df682b297f6b23ec35615ed7bb50cbb25d25869 upstream. If hardware (or firmware) detects palm on the surface of the device it does not mean that the data packet is bad from the protocol standpoint. Instead of reporting PSMOUSE_BAD_DATA in this case simply threat it as if nothing touches the surface. BugLink: http://bugs.launchpad.net/bugs/1229361 Signed-off-by: Joseph Salisbury Tested-by: Kamal Mostafa Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

HID: Correct the USB IDs for the new Macbook Air 6

2013-09-27T00:18:15Z

commit 8c89cc17b91992845bd635813cd162fe8dfcec6e upstream. A recent patch (9d9a04ee) added support for the new machine, but got the sequence of USB ids wrong. Reports from both Ian and Linus T show that the 0x0291 id is for ISO, not ANSI, which should have the missing number 0x0290. This patchs moves the three numbers accordingly, fixing the problem. Reported-and-tested-by: Ian Munsie Tested-by: Linus G Thiel Signed-off-by: Henrik Rydberg Acked-by: Dmitry Torokhov Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman

Input: bcm5974 - add support for the 2013 MacBook Air

2013-07-22T01:21:29Z

commit 148c1c8ad3c4170186ebe6ea5900adde27d2a0e7 upstream. The June 2013 Macbook Air (13'') has a new trackpad protocol; four new values are inserted in the header, and the mode switch is no longer needed. This patch adds support for the new devices. Reported-and-tested-by: Brad Ford Signed-off-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2013-06-05T00:11:06Z

Pull input fixes from Dmitry Torokhov: "Just a 2 small driver fixups here" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wacom - fix a typo for Cintiq 22HDT Input: synaptics - fix sync lost after resume on some laptops

Input: synaptics - fix sync lost after resume on some laptops

2013-06-04T16:33:16Z

In summary, the symptom is intermittent key events lost after resume on some machines with synaptics touchpad (seems this is synaptics _only_), and key events loss is due to serio port reconnect after psmouse sync lost. Removing psmouse and inserting it back during the suspend/resume process is able to work around the issue, so the difference between psmouse_connect() and psmouse_reconnect() is the key to the root cause of this problem. After comparing the two different paths, synaptics driver has its own implementation of synaptics_reconnect(), and the missing psmouse_probe() seems significant, the patch below added psmouse_probe() to the reconnect process, and has been verified many times that the issue could not be reliably reproduced. There are two PS/2 commands in psmouse_probe(): 1. PSMOUSE_CMD_GETID 2. PSMOUSE_CMD_RESET_DIS Only the PSMOUSE_CMD_GETID seems to be significant. The PSMOUSE_CMD_RESET_DIS is irrelevant to this issue after trying several times. So we have only implemented this patch to issue the PSMOUSE_CMD_GETID so far. Tested-by: Daniel Manrique Signed-off-by: James M Leddy Signed-off-by: Dmitry Torokhov

Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux

2013-05-09T16:59:16Z

Pull removal of GENERIC_GPIO from Grant Likely: "GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it is possible to do so which has been causing confusion and breakage. This branch does the work to completely eliminate GENERIC_GPIO." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: gpio: update gpio Chinese documentation Remove GENERIC_GPIO config option Convert selectors of GENERIC_GPIO to GPIOLIB blackfin: force use of gpiolib m68k: coldfire: use gpiolib mips: pnx833x: remove requirement for GENERIC_GPIO openrisc: default GENERIC_GPIO to false avr32: default GENERIC_GPIO to false xtensa: remove explicit selection of GENERIC_GPIO sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB powerpc: remove redundant GENERIC_GPIO selection unicore32: default GENERIC_GPIO to false unicore32: remove unneeded select GENERIC_GPIO arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB arm: remove redundant GENERIC_GPIO selection mips: alchemy: require gpiolib mips: txx9: change GENERIC_GPIO to GPIOLIB mips: loongson: use GPIO driver on CONFIG_GPIOLIB mips: remove redundant GENERIC_GPIO select