Linux kernel source tree https://git.amat.us/linux/atom/drivers/input/misc?h=v3.4.9 2012-04-16T14:45:34Z 2012-04-16T14:45:34Z Peter Ujfalusi peter.ujfalusi@ti.com 2012-04-03T08:56:51Z urn:sha1:8eaeb9393397be8eb700ab38a69c450975463b77 Complete the separation of the twl6040 from the twl core since it is a separate chip, not part of the twl6030 PMIC. Make the needed Kconfig changes for the depending drivers at the same time to avoid breaking the kernel build (vibra, ASoC components). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonicro.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> 2012-04-12T19:49:07Z Linus Torvalds torvalds@linux-foundation.org 2012-04-12T19:49:07Z urn:sha1:4abb663b641ee21024906dae45af7de50ebad2d8 Pull input updates from Dmitry Torokhov: "Just a few small fixes..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: da9052 - fix memory leak in da9052_onkey_probe() Input: gpio_mouse - use linux/gpio.h rather than asm/gpio.h Input: trackpoint - use psmouse_fmt() for messages Input: elantech - v4 is a clickpad, with only one button Input: elantech - reset touchpad before configuring it Input: sentelic - filter taps in absolute mode Input: tps6507x-ts - fix MODULE_ALIAS to match driver name 2012-04-12T05:15:04Z Jesper Juhl jj@chaosbits.net 2012-04-12T03:55:18Z urn:sha1:0e3d0f3d960bf5b895adcf9ffc79d2077f1411d5 If, in drivers/input/misc/da9052_onkey.c::da9052_onkey_probe(), the call to either kzalloc() or input_allocate_device() fails then we will return -ENOMEM from the function without freeing the other allocation that may have succeeded, thus we leak either the memory allocated for 'onkey' or the memory allocated for 'input_dev' if one succeeds and the other fails. Fix that by jumping to the 'err_free_mem' label at the end of the function that properly cleans up rather than returning directly. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> 2012-03-28T20:56:35Z Linus Torvalds torvalds@linux-foundation.org 2012-03-28T20:56:35Z urn:sha1:30304e5a79d424eb2c8707b3ff0e9b8bf6ab3e8f Pull MFD changes from Samuel Ortiz: - 4 new drivers: Freescale i.MX on-chip Anatop, Ricoh's RC5T583 and TI's TPS65090 and TPS65217. - New variants support (8420, 8520 ab9540), cleanups and bug fixes for the abx500 and db8500 ST-E chipsets. - Some minor fixes and update for the wm8994 from Mark. - The beginning of a long term TWL cleanup effort coming from the TI folks. - Various fixes and cleanups for the s5m, TPS659xx, pm860x, and MAX8997 drivers. Fix up trivial conflicts due to duplicate patches and header file cleanups (<linux/device.h> removal etc). * tag 'mfd_3.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (97 commits) gpio/twl: Add DT support to gpio-twl4030 driver gpio/twl: Allocate irq_desc dynamically for SPARSE_IRQ support mfd: Detach twl6040 from the pmic mfd driver mfd: Replace twl-* pr_ macros by the dev_ equivalent and do various cleanups mfd: Micro-optimization on twl4030 IRQ handler mfd: Make twl4030 SIH SPARSE_IRQ capable mfd: Move twl-core IRQ allocation into twl[4030|6030]-irq files mfd: Remove references already defineid in header file from twl-core mfd: Remove unneeded header from twl-core mfd: Make twl-core not depend on pdata->irq_base/end ARM: OMAP2+: board-omap4-*: Do not use anymore TWL6030_IRQ_BASE in board files mfd: Return twl6030_mmc_card_detect IRQ for board setup Revert "mfd: Add platform data for MAX8997 haptic driver" mfd: Add support for TPS65090 mfd: Add some da9052-i2c section annotations mfd: Build rtc5t583 only if I2C config is selected to y. mfd: Add anatop mfd driver mfd: Fix compilation error in tps65910.h mfd: Add 8420 variant to db8500-prcmu mfd: Add 8520 PRCMU variant to db8500-prcmu ... 2012-03-23T03:20:18Z Linus Torvalds torvalds@linux-foundation.org 2012-03-23T03:20:18Z urn:sha1:7bfe0e66d5da32961f0060fc5d96b739b1ed64b9 Pull input subsystem updates from Dmitry Torokhov: "- we finally merged driver for USB version of Synaptics touchpads (I guess most commonly found in IBM/Lenovo keyboard/touchpad combo); - a bunch of new drivers for embedded platforms (Cypress touchscreens, DA9052 OnKey, MAX8997-haptic, Ilitek ILI210x touchscreens, TI touchscreen); - input core allows clients to specify desired clock source for timestamps on input events (EVIOCSCLOCKID ioctl); - input core allows querying state of all MT slots for given event code via EVIOCGMTSLOTS ioctl; - various driver fixes and improvements." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits) Input: ili210x - add support for Ilitek ILI210x based touchscreens Input: altera_ps2 - use of_match_ptr() Input: synaptics_usb - switch to module_usb_driver() Input: convert I2C drivers to use module_i2c_driver() Input: convert SPI drivers to use module_spi_driver() Input: omap4-keypad - move platform_data to <linux/platform_data> Input: kxtj9 - who_am_i check value and initial data rate fixes Input: add driver support for MAX8997-haptic Input: tegra-kbc - revise device tree support Input: of_keymap - add device tree bindings for simple key matrices Input: wacom - fix physical size calculation for 3rd-gen Bamboo Input: twl4030-vibra - really switch from #if to #ifdef Input: hp680_ts_input - ensure arguments to request_irq and free_irq are compatible Input: max8925_onkey - avoid accessing input device too early Input: max8925_onkey - allow to be used as a wakeup source Input: atmel-wm97xx - convert to dev_pm_ops Input: atmel-wm97xx - set driver owner Input: add cyttsp touchscreen maintainer entry Input: cyttsp - remove useless checks in cyttsp_probe() Input: usbtouchscreen - add support for Data Modul EasyTouch TP 72037 ... 2012-03-23T03:16:14Z Linus Torvalds torvalds@linux-foundation.org 2012-03-23T02:59:19Z urn:sha1:d4c6fa73fe984e504d52f3d6bba291fd76fe49f7 Pull xen updates from Konrad Rzeszutek Wilk: "which has three neat features: - PV multiconsole support, so that there can be hvc1, hvc2, etc; This can be used in HVM and in PV mode. - P-state and C-state power management driver that uploads said power management data to the hypervisor. It also inhibits cpufreq scaling drivers to load so that only the hypervisor can make power management decisions - fixing a weird perf bug. There is one thing in the Kconfig that you won't like: "default y if (X86_ACPI_CPUFREQ = y || X86_POWERNOW_K8 = y)" (note, that it all depends on CONFIG_XEN which depends on CONFIG_PARAVIRT which by default is off). I've a fix to convert that boolean expression into "default m" which I am going to post after the cpufreq git pull - as the two patches to make this work depend on a fix in Dave Jones's tree. - Function Level Reset (FLR) support in the Xen PCI backend. Fixes: - Kconfig dependencies for Xen PV keyboard and video - Compile warnings and constify fixes - Change over to use percpu_xxx instead of this_cpu_xxx" Fix up trivial conflicts in drivers/tty/hvc/hvc_xen.c due to changes to a removed commit. * tag 'stable/for-linus-3.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen kconfig: relax INPUT_XEN_KBDDEV_FRONTEND deps xen/acpi-processor: C and P-state driver that uploads said data to hypervisor. xen: constify all instances of "struct attribute_group" xen/xenbus: ignore console/0 hvc_xen: introduce HVC_XEN_FRONTEND hvc_xen: implement multiconsole support hvc_xen: support PV on HVM consoles xenbus: don't free other end details too early xen/enlighten: Expose MWAIT and MWAIT_LEAF if hypervisor OKs it. xen/setup/pm/acpi: Remove the call to boot_option_idle_override. xenbus: address compiler warnings xen: use this_cpu_xxx replace percpu_xxx funcs xen/pciback: Support pci_reset_function, aka FLR or D3 support. pci: Introduce __pci_reset_function_locked to be used when holding device_lock. xen: Utilize the restore_msi_irqs hook. 2012-03-20T00:02:01Z Dmitry Torokhov dmitry.torokhov@gmail.com 2012-03-20T00:02:01Z urn:sha1:10ce3cc919f50c2043b41ca968b43c26a3672600 2012-03-17T06:06:34Z Dmitry Torokhov dmitry.torokhov@gmail.com 2012-03-17T06:05:44Z urn:sha1:4a53383565e340254479ce4d47bc181884ddf6c3 Signed-off-by: Dmitry Torokhov <dtor@mail.ru> 2012-03-17T06:06:19Z Axel Lin axel.lin@gmail.com 2012-03-17T06:05:41Z urn:sha1:1b92c1cf6b638e7cbe9fdaac3f6efb8874f5cc02 This patch converts the drivers in drivers/input/* to use the module_i2c_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> 2012-03-17T06:06:11Z Axel Lin axel.lin@gmail.com 2012-03-17T06:05:26Z urn:sha1:ca83922e1c51c090e62bd42f3c12c84f49374a9e This patch converts the drivers in drivers/input/* to use the module_spi_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>