linux/drivers/input/misc/Makefile, branch v3.12.13

Input: add driver for slidebar on Lenovo IdeaPad laptops

2013-08-26T16:30:03Z

This driver adds support for slidebars found on some Lenovo IdeaPad laptops (the slidebars work with SlideNav/Desktop Navigator under Windows). Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=16004 Registers 'IdeaPad Slidebar' input device and /sys/devices/platform/ideapad_slidebar/slidebar_mode for switching slidebar's modes. Now works on: IdeaPad Y550, Y550P. May work on (testing and adding new models is needed): Ideapad Y560, Y460, Y450, Y650, and, probably, some others. Signed-off-by: Andrey Moiseev Signed-off-by: Dmitry Torokhov

Input: sirfsoc_pwrc - add onkey input driver for CSR SiRFprimaII PWRC

2013-06-03T06:49:12Z

There is an embedded PWRC(power controller) in SiRFprimaII and SiRFatlasVI, we have an ONKEY button which can generate interrupt to IRQ controller. In a typical user scenarios, at the runtime, if users touch the key, we put system to s2ram status. Signed-off-by: Binghua Duan Signed-off-by: Xianglong Du Signed-off-by: Barry Song Signed-off-by: Dmitry Torokhov

Merge tag 'v3.9-rc3' into next

2013-03-18T02:40:50Z

Merge with mainline to bring in module_platform_driver_probe() and devm_ioremap_resource().

Input: add IMS Passenger Control Unit driver

2013-03-12T15:50:22Z

The PCU is a device installed in the armrest of a plane seat and is connected to IMS Rave Entertainment System. It has a set of control buttons (Volume Up/Down, Attendant, Lights, etc) on one side and gamepad-like controls on the other side. Originally the device was handled from userspace and because of that it presents itself on USB bus as a CDC-ACM modem device that however can not make calls. However the custom handling is not as convenient as using standard input subsystem facilities. If it was pure input device it would be possible to continue using userspace solution (moving it over to uinput), but the device also has backlighted keys which can not be supported via uinput. Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2012-12-18T20:46:37Z

Pull second round of input updates from Dmitry Torokhov: "As usual, there are a couple of new drivers, input core now supports managed input devices (devres), a slew of drivers now have device tree support and a bunch of fixes and cleanups." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (71 commits) Input: walkera0701 - fix crash on startup Input: matrix-keymap - provide a proper module license Input: gpio_keys_polled - switch to using gpio_request_one() Input: gpio_keys - switch to using gpio_request_one() Input: wacom - fix touch support for Bamboo Fun CTH-461 Input: xpad - add a few new VID/PID combinations Input: xpad - minor formatting fixes Input: gpio-keys-polled - honor 'autorepeat' setting in platform data Input: tca8418-keypad - switch to using managed resources Input: tca8418_keypad - increase severity of failures in probe() Input: tca8418_keypad - move device ID tables closer to where they are used Input: tca8418_keypad - use dev_get_platdata() to retrieve platform data Input: tca8418_keypad - use a temporary variable for parent device Input: tca8418_keypad - add support for shared interrupt Input: tca8418_keypad - add support for device tree bindings Input: remove Compaq iPAQ H3600 (Bitsy) touchscreen driver Input: bu21013_ts - add support for Device Tree booting Input: bu21013_ts - move GPIO init and exit functions into the driver Input: bu21013_ts - request regulator that actually exists ARM: ux500: Strip out duplicate touch screen platform information ...

Input - arizona-haptics: Add driver haptics module on Arizona CODECs

2012-11-28T13:43:52Z

The Arizona CODECs contain a haptics module providing vibration feedback support. Implement basic support for this, providing simple start/stop and signal magnitude control. Since the output path for haptics is routed through the CODEC audio routing it is modelled as a signal generator within ASoC, the haptics driver calls DAPM to start and stop the output drivers. An appropriate output path must be configured via ALSA to connect the haptics source to the correct output. Signed-off-by: Mark Brown

Input: add Retu power button driver.

2012-11-10T09:02:09Z

Signed-off-by: Aaro Koskinen Acked-by: Felipe Balbi Signed-off-by: Dmitry Torokhov

Input: add DA9055 Onkey driver

2012-10-30T07:47:09Z

This is the ONKEY driver of the Dialog DA9055 PMIC and depends on the DA9055 MFD core driver. This driver was functionally tested on SMDK6410 board. Signed-off-by: David Dajun Chen Signed-off-by: Ashish Jangam Signed-off-by: Dmitry Torokhov

input: Add onkey support for 88PM80X PMIC

2012-07-24T22:29:19Z

Add onkey support for MARVELL 88PM80X PMIC. Signed-off-by: Qiao Zhou Acked-by: Dmitry Torokhov Signed-off-by: Samuel Ortiz

Input: add driver support for MAX8997-haptic

2012-03-17T05:49:25Z

The MAX8997-haptic function can be used to control motor. User can control the haptic driver by using force feedback framework. Signed-off-by: Donggeun Kim Signed-off-by: MyungJoo Ham Signed-off-by: Kyungmin Park Acked-by: Samuel Ortiz Signed-off-by: Dmitry Torokhov