Linux kernel source tree https://git.amat.us/linux/atom/drivers/input/misc/Kconfig?h=v3.9.3 2012-12-18T20:46:37Z 2012-12-18T20:46:37Z Linus Torvalds torvalds@linux-foundation.org 2012-12-18T20:46:37Z urn:sha1:31564cbd77baa88405862d4aa0d00893ab1d8cb7 Pull second round of input updates from Dmitry Torokhov: "As usual, there are a couple of new drivers, input core now supports managed input devices (devres), a slew of drivers now have device tree support and a bunch of fixes and cleanups." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (71 commits) Input: walkera0701 - fix crash on startup Input: matrix-keymap - provide a proper module license Input: gpio_keys_polled - switch to using gpio_request_one() Input: gpio_keys - switch to using gpio_request_one() Input: wacom - fix touch support for Bamboo Fun CTH-461 Input: xpad - add a few new VID/PID combinations Input: xpad - minor formatting fixes Input: gpio-keys-polled - honor 'autorepeat' setting in platform data Input: tca8418-keypad - switch to using managed resources Input: tca8418_keypad - increase severity of failures in probe() Input: tca8418_keypad - move device ID tables closer to where they are used Input: tca8418_keypad - use dev_get_platdata() to retrieve platform data Input: tca8418_keypad - use a temporary variable for parent device Input: tca8418_keypad - add support for shared interrupt Input: tca8418_keypad - add support for device tree bindings Input: remove Compaq iPAQ H3600 (Bitsy) touchscreen driver Input: bu21013_ts - add support for Device Tree booting Input: bu21013_ts - move GPIO init and exit functions into the driver Input: bu21013_ts - request regulator that actually exists ARM: ux500: Strip out duplicate touch screen platform information ... 2012-11-28T13:43:52Z Mark Brown broonie@opensource.wolfsonmicro.com 2012-11-26T21:17:21Z urn:sha1:9dd555e2f4de1af1bb0f75cc84ed0708fcdb5987 The Arizona CODECs contain a haptics module providing vibration feedback support. Implement basic support for this, providing simple start/stop and signal magnitude control. Since the output path for haptics is routed through the CODEC audio routing it is modelled as a signal generator within ASoC, the haptics driver calls DAPM to start and stop the output drivers. An appropriate output path must be configured via ALSA to connect the haptics source to the correct output. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> 2012-11-10T09:02:09Z Aaro Koskinen aaro.koskinen@iki.fi 2012-11-10T08:50:25Z urn:sha1:544a46c917fcf0a439cc0c428d76ba731a380cae Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 2012-11-03T19:14:56Z Sascha Hauer s.hauer@pengutronix.de 2012-11-03T19:05:52Z urn:sha1:d56a289be2ce01d1aa426a6cf45dede14a8db41e A very simple binding, the only property is the phandle to the PWM. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 2012-10-30T07:47:09Z Ashish Jangam ashish.jangam@kpitcummins.com 2012-10-30T07:27:25Z urn:sha1:8ed2757edd0c6bacf20c1c55bd53a0acba565be8 This is the ONKEY driver of the Dialog DA9055 PMIC and depends on the DA9055 MFD core driver. This driver was functionally tested on SMDK6410 board. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 2012-10-25T07:13:08Z Kees Cook keescook@chromium.org 2012-10-25T06:53:02Z urn:sha1:e52278a36898dc93aa1991a3ac976c1c7c55e2ed This config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 2012-07-24T22:29:19Z Qiao Zhou zhouqiao@marvell.com 2012-07-17T07:17:39Z urn:sha1:96c905f408d4ed16b7b87d7d2b16e8d8d02f0cc8 Add onkey support for MARVELL 88PM80X PMIC. Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> 2012-04-16T14:45:34Z Peter Ujfalusi peter.ujfalusi@ti.com 2012-04-03T08:56:51Z urn:sha1:8eaeb9393397be8eb700ab38a69c450975463b77 Complete the separation of the twl6040 from the twl core since it is a separate chip, not part of the twl6030 PMIC. Make the needed Kconfig changes for the depending drivers at the same time to avoid breaking the kernel build (vibra, ASoC components). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonicro.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> 2012-03-23T03:20:18Z Linus Torvalds torvalds@linux-foundation.org 2012-03-23T03:20:18Z urn:sha1:7bfe0e66d5da32961f0060fc5d96b739b1ed64b9 Pull input subsystem updates from Dmitry Torokhov: "- we finally merged driver for USB version of Synaptics touchpads (I guess most commonly found in IBM/Lenovo keyboard/touchpad combo); - a bunch of new drivers for embedded platforms (Cypress touchscreens, DA9052 OnKey, MAX8997-haptic, Ilitek ILI210x touchscreens, TI touchscreen); - input core allows clients to specify desired clock source for timestamps on input events (EVIOCSCLOCKID ioctl); - input core allows querying state of all MT slots for given event code via EVIOCGMTSLOTS ioctl; - various driver fixes and improvements." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits) Input: ili210x - add support for Ilitek ILI210x based touchscreens Input: altera_ps2 - use of_match_ptr() Input: synaptics_usb - switch to module_usb_driver() Input: convert I2C drivers to use module_i2c_driver() Input: convert SPI drivers to use module_spi_driver() Input: omap4-keypad - move platform_data to <linux/platform_data> Input: kxtj9 - who_am_i check value and initial data rate fixes Input: add driver support for MAX8997-haptic Input: tegra-kbc - revise device tree support Input: of_keymap - add device tree bindings for simple key matrices Input: wacom - fix physical size calculation for 3rd-gen Bamboo Input: twl4030-vibra - really switch from #if to #ifdef Input: hp680_ts_input - ensure arguments to request_irq and free_irq are compatible Input: max8925_onkey - avoid accessing input device too early Input: max8925_onkey - allow to be used as a wakeup source Input: atmel-wm97xx - convert to dev_pm_ops Input: atmel-wm97xx - set driver owner Input: add cyttsp touchscreen maintainer entry Input: cyttsp - remove useless checks in cyttsp_probe() Input: usbtouchscreen - add support for Data Modul EasyTouch TP 72037 ... 2012-03-17T05:49:25Z Donggeun Kim dg77.kim@samsung.com 2012-03-16T19:28:22Z urn:sha1:104594b01ce750c91a19e9f1d8fe6b24ea8f9a59 The MAX8997-haptic function can be used to control motor. User can control the haptic driver by using force feedback framework. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>