linux/drivers/i2c, branch v3.16

i2c: sun6i-p2wi: Remove duplicate inclusion of module.h

2014-06-27T12:39:36Z

module.h was included twice. Signed-off-by: Sachin Kamat Acked-by: Boris BREZILLON Signed-off-by: Wolfram Sang

i2c: mux: pca954x: fix dependencies

2014-06-27T12:27:19Z

This driver causes the following randconfig build error: drivers/i2c/muxes/i2c-mux-pca954x.c: In function ‘pca954x_probe’: drivers/i2c/muxes/i2c-mux-pca954x.c:204:2: error: implicit declaration of function ‘devm_gpiod_get’ [-Werror=implicit-function-declaration] gpio = devm_gpiod_get(&client->dev, "reset"); ^ drivers/i2c/muxes/i2c-mux-pca954x.c:204:7: warning: assignment makes pointer from integer without a cast [enabled by default] gpio = devm_gpiod_get(&client->dev, "reset"); ^ drivers/i2c/muxes/i2c-mux-pca954x.c:206:3: error: implicit declaration of function ‘gpiod_direction_output’ [-Werror=implicit-function-declaration] gpiod_direction_output(gpio, 0); ^ cc1: some warnings being treated as errors make[3]: *** [drivers/i2c/muxes/i2c-mux-pca954x.o] Error 1 This is because it is getting compiled without gpiolib, so introduce an explicit dependency. Reported-by: Jim Davis Signed-off-by: Linus Walleij Signed-off-by: Wolfram Sang

i2c: sun6-p2wi: fix call to snprintf

2014-06-17T12:28:04Z

Fixes possible issue in case pdev name contains formatting characters. Signed-off-by: Boris BREZILLON Reported-by: Kees Cook Signed-off-by: Wolfram Sang

i2c: rk3x: add NULL entry to the end of_device_id array

2014-06-12T21:56:37Z

drivers/i2c/busses/i2c-rk3x.c:610:69-70: rk3x_i2c_match is not NULL terminated at line 610 Make sure of_device_id tables are NULL terminated Generated by: /kbuild/src/linux/scripts/coccinelle/misc/of_table.cocci Signed-off-by: Dan Carpenter Signed-off-by: Wolfram Sang

i2c: sun6i-p2wi: use proper return value in probe

2014-06-12T20:22:25Z

Fixes: >> drivers/i2c/busses/i2c-sun6i-p2wi.c:243:10: warning: 'ret' may be used uninitialized in this function [-Wmaybe-uninitialized] Reported-by: kbuild test robot Signed-off-by: Wolfram Sang

i2c: sunxi: add P2WI (Push/Pull 2 Wire Interface) controller support

2014-06-11T22:24:06Z

The P2WI controller looks like an SMBus controller which only supports byte data transfers. But, it differs from standard SMBus protocol on several aspects: - it supports only one slave device, and thus drop the address field - it adds a parity bit every 8bits of data - only one read access is required to read a byte (instead of a write followed by a read access in standard SMBus protocol) - there's no Ack bit after each byte transfer This means this bus cannot be used to interface with standard SMBus devices (the only known device to support this interface is the AXP221 PMIC). However the P2WI protocol is close enough to SMBus to be integrated in the I2C subsystem (see this thread [1] for detailed reasons that led to integrating this driver in the I2C subsystem). [1] http://www.spinics.net/lists/linux-i2c/msg15066.html Signed-off-by: Boris BREZILLON Acked-by: Maxime Ripard Acked-by: Arnd Bergmann Signed-off-by: Wolfram Sang

i2c: rk3x: add driver for Rockchip RK3xxx SoC I2C adapter

2014-06-11T22:23:56Z

Driver for the native I2C adapter found in Rockchip RK3xxx SoCs. Configuration is only possible through devicetree. The driver is interrupt driven and supports the I2C_M_IGNORE_NAK mangling bit. Signed-off-by: Max Schwarz Signed-off-by: Wolfram Sang

Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next

2014-06-06T19:26:57Z

Pull i2c updates from Wolfram Sang: "I2C has the following updates for 3.16: - major cleanups to the rcar and sh_mobile drivers - removal of nuc900 driver which had a compile error for years - usual bunch of driver updates, bugfixes and cleanups" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (44 commits) i2c: pca954x: Fix compilation without CONFIG_GPIOLIB i2c: mux: pca954x: Use the descriptor-based GPIO API i2c: mpc: insert DR read in i2c_fixup() i2c: bfin: turn to Resource-managed API in probe function i2c: Make of_device_id array const i2c: remove unnecessary OOM messages i2c: designware-pci: Add Haswell PCI IDs i2c: designware: Add runtime PM hooks i2c: designware: Disable device on system suspend i2c: nuc900: remove driver i2c: imx: update i2c clock divider for each transaction i2c: imx: fix the i2c bus hang issue when do repeat restart i2c: rcar: update copyright and license information i2c: rcar: janitorial cleanup after refactoring i2c: rcar: reuse status bits as enable bits i2c: rcar: remove spinlock i2c: rcar: refactor status bit handling i2c: rcar: refactor setting up msg i2c: rcar: check bus free before first message i2c: rcar: refactor irq state machine ...

i2c: pca954x: Fix compilation without CONFIG_GPIOLIB

2014-06-05T13:09:33Z

The pca954x driver recently switched to the GPIO descriptor API without including the correct header. This breaks compilation without CONFIG_GPIOLIB. drivers/i2c/muxes/i2c-mux-pca954x.c: In function ‘pca954x_probe’: drivers/i2c/muxes/i2c-mux-pca954x.c:204:2: error: implicit declaration of function ‘devm_gpiod_get’ [-Werror=implicit-function-declaration] gpio = devm_gpiod_get(&client->dev, "reset"); ^ drivers/i2c/muxes/i2c-mux-pca954x.c:204:7: warning: assignment makes pointer from integer without a cast [enabled by default] gpio = devm_gpiod_get(&client->dev, "reset"); ^ drivers/i2c/muxes/i2c-mux-pca954x.c:206:3: error: implicit declaration of function ‘gpiod_direction_output’ [-Werror=implicit-function-declaration] gpiod_direction_output(gpio, 0); ^ cc1: some warnings being treated as errors make[3]: *** [drivers/i2c/muxes/i2c-mux-pca954x.o] Error 1 Fix it by including the right header. Reported-by: Jim Davis Signed-off-by: Laurent Pinchart Signed-off-by: Wolfram Sang

i2c: mux: pca954x: Use the descriptor-based GPIO API

2014-06-03T12:24:20Z

The ID-based GPIO API pushes handling of GPIO polarity to drivers. Simplify the driver by switching to the descriptor-based GPIO API. This also fixes a mismatch between the pca954x DT bindings that document a "reset-gpios" property and the driver that requests a "reset-gpio" property. Signed-off-by: Laurent Pinchart Reviewed-by: Linus Walleij Signed-off-by: Wolfram Sang