linux/drivers/gpu, branch v3.4.22

radeon: add AGPMode 1 quirk for RV250

2012-12-03T19:47:09Z

commit 45171002b01b2e2ec4f991eca81ffd8430fd0aec upstream. The Intel 82855PM host bridge / Mobility FireGL 9000 RV250 combination in an (outdated) ThinkPad T41 needs AGPMode 1 for suspend/resume (under KMS, that is). So add a quirk for it. (Change R250 to RV250 in comment for preceding quirk too.) Signed-off-by: Paul Bolle Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman

drm/i915: fix overlay on i830M

2012-11-26T19:38:01Z

commit a9193983f4f292a82a00c72971c17ec0ee8c6c15 upstream. The overlay on the i830M has a peculiar failure mode: It works the first time around after boot-up, but consistenly hangs the second time it's used. Chris Wilson has dug out a nice errata: "1.5.12 Clock Gating Disable for Display Register Address Offset: 06200h–06203h "Bit 3 Ovrunit Clock Gating Disable. 0 = Clock gating controlled by unit enabling logic 1 = Disable clock gating function DevALM Errata ALM049: Overlay Clock Gating Must be Disabled: Overlay & L2 Cache clock gating must be disabled in order to prevent device hangs when turning off overlay.SW must turn off Ovrunit clock gating (6200h) and L2 Cache clock gating (C8h)." Now I've nowhere found that 0xc8 register and hence couldn't apply the l2 cache workaround. But I've remembered that part of the magic that the OVERLAY_ON/OFF commands are supposed to do is to rearrange cache allocations so that the overlay scaler has some scratch space. And while pondering how that could explain the hang the 2nd time we enable the overlay, I've remembered that the old ums overlay code did _not_ issue the OVERLAY_OFF cmd. And indeed, disabling the OFF cmd results in the overlay working flawlessly, so I guess we can workaround the lack of the above workaround by simply never disabling the overlay engine once it's enabled. Note that we have the first part of the above w/a already implemented in i830_init_clock_gating - leave that as-is to avoid surprises. v2: Add a comment in the code. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47827 Tested-by: Rhys Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter [bwh: Backported to 3.2: - Adjust context - s/intel_ring_emit(ring, /OUT_RING(/] Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

ttm: Clear the ttm page allocated from high memory zone correctly

2012-11-26T19:37:45Z

commit ac207ed2471150e06af0afc76e4becc701fa2733 upstream. The TTM page can be allocated from high memory. In such case it is wrong to use the page_address(page) as the virtual address for the high memory page. bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=50241 Signed-off-by: Zhao Yakui Reviewed-by: Thomas Hellstrom Signed-off-by: Dave Airlie Signed-off-by: Greg Kroah-Hartman

drm/radeon: fix logic error in atombios_encoders.c

2012-11-26T19:37:45Z

commit b9196395c905edec512dfd6690428084228c16ec upstream. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=50431 Reported-by: David Binderman Signed-off-by: Alex Deucher Reviewed-by: Michel Dänzer Signed-off-by: Greg Kroah-Hartman

drm/i915: clear the entire sdvo infoframe buffer

2012-11-17T21:16:35Z

commit b6e0e543f75729f207b9c72b0162ae61170635b2 upstream. Like in the case of native hdmi, which is fixed already in commit adf00b26d18e1b3570451296e03bcb20e4798cdd Author: Paulo Zanoni Date: Tue Sep 25 13:23:34 2012 -0300 drm/i915: make sure we write all the DIP data bytes we need to clear the entire sdvo buffer to avoid upsetting the display. Since infoframe buffer writing is now a bit more elaborate, extract it into it's own function. This will be useful if we ever get around to properly update the ELD for sdvo. Also #define proper names for the two buffer indexes with fixed usage. v2: Cite the right commit above, spotted by Paulo Zanoni. v3: I'm too stupid to paste the right commit. v4: Ben Hutchings noticed that I've failed to handle an underflow in my loop logic, breaking it for i >= length + 8. Since I've just lost C programmer license, use his solution. Also, make the frustrated 0-base buffer size a notch more clear. Reported-and-tested-by: Jürg Billeter Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=25732 Cc: Paulo Zanoni Cc: Ben Hutchings Reviewed-by: Rodrigo Vivi Signed-off-by: Daniel Vetter Signed-off-by: Greg Kroah-Hartman

drm/i915: fixup infoframe support for sdvo

2012-11-17T21:16:35Z

commit 81014b9d0b55fb0b48f26cd2a943359750d532db upstream. At least the worst offenders: - SDVO specifies that the encoder should compute the ecc. Testing also shows that we must not send the ecc field, so copy the dip_infoframe struct to a temporay place and avoid the ecc field. This way the avi infoframe is exactly 17 bytes long, which agrees with what the spec mandates as a minimal storage capacity (with the ecc field it would be 18 bytes). - Only 17 when sending the avi infoframe. The SDVO spec explicitly says that sending more data than what the device announces results in undefined behaviour. - Add __attribute__((packed)) to the avi and spd infoframes, for otherwise they're wrongly aligned. Noticed because the avi infoframe ended up being 18 bytes large instead of 17. We haven't noticed this yet because we don't use the uint16_t fields yet (which are the only ones that would be wrongly aligned). This regression has been introduce by 3c17fe4b8f40a112a85758a9ab2aebf772bdd647 is the first bad commit commit 3c17fe4b8f40a112a85758a9ab2aebf772bdd647 Author: David Härdeman Date: Fri Sep 24 21:44:32 2010 +0200 i915: enable AVI infoframe for intel_hdmi.c [v4] Patch tested on my g33 with a sdvo hdmi adaptor. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=25732 Tested-by: Peter Ross (G35 SDVO-HDMI) Reviewed-by: Eugeni Dodonov Signed-Off-by: Daniel Vetter Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

drm/radeon/si: add some missing regs to the VM reg checker

2012-11-17T21:16:35Z

commit f418b88aad0c42b4caf4d79a0cf8d14a5d0a2284 upstream. This register is needed for streamout to work properly. Signed-off-by: Alex Deucher Reviewed-by: Michel Dänzer Signed-off-by: Greg Kroah-Hartman

drm/radeon/cayman: add some missing regs to the VM reg checker

2012-11-17T21:16:34Z

commit 860fe2f05fa2eacac84368e23547ec8cf3cc6652 upstream. These regs were being wronly rejected leading to rendering issues. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=56876 Signed-off-by: Alex Deucher Reviewed-by: Michel Dänzer Signed-off-by: Greg Kroah-Hartman

drm/vmwgfx: Fix a case where the code would BUG when trying to pin GMR memory

2012-11-17T21:16:34Z

commit afcc87aa6a233e52df73552dc1dc9ae3881b7cc8 upstream. Signed-off-by: Thomas Hellstrom Reviewed-by: Brian Paul Reviewed-by: Dmitry Torokhov Cc: linux-graphics-maintainer@vmware.com Signed-off-by: Dave Airlie Signed-off-by: Greg Kroah-Hartman

drm/vmwgfx: Fix hibernation device reset

2012-11-17T21:16:34Z

commit 95e8f6a21996c4cc2c4574b231c6e858b749dce3 upstream. The device would not reset properly when resuming from hibernation. Signed-off-by: Thomas Hellstrom Reviewed-by: Brian Paul Reviewed-by: Dmitry Torokhov Cc: linux-graphics-maintainer@vmware.com Signed-off-by: Dave Airlie Signed-off-by: Greg Kroah-Hartman