linux/drivers/gpu, branch v3.0.10

drm/i915: enable ring freq scaling, RC6 and graphics turbo on Ivy Bridge v3

2011-11-21T22:31:20Z

commit 1c70c0cebd1295a42fec75045b8a6b4419cedef3 upstream. They use the same register interfaces, so we can simply enable the existing code on IVB. v2: - resolve conflict with ring freq scaling, we can enable it too v3: - resolve conflict again, this time on drm-intel-next Signed-off-by: Jesse Barnes Signed-off-by: Keith Packard Signed-off-by: Robert Hooker Acked-by: Leann Ogasawara Acked-by: Herton Krzesinski Signed-off-by: Tim Gardner Signed-off-by: Greg Kroah-Hartman

drm/radeon/kms: make an aux failure debug only

2011-11-21T22:31:16Z

commit 091264f0bc12419560ac64fcef4567809d611658 upstream. Can happen when there is no DP panel attached, confusing users. Make it debug only. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie Signed-off-by: Greg Kroah-Hartman

drm/nouveau: initialize chan->fence.lock before use

2011-11-21T22:31:16Z

commit 5e60ee780e792efe6dce97eceb110b1d30bab850 upstream. Fence lock needs to be initialized before any call to nouveau_channel_put because it calls nouveau_channel_idle->nouveau_fence_update which uses fence lock. BUG: spinlock bad magic on CPU#0, test/24134 lock: ffff88019f90dba8, .magic: 00000000, .owner: /-1, .owner_cpu: 0 Pid: 24134, comm: test Not tainted 3.0.0-nv+ #800 Call Trace: spin_bug+0x9c/0xa3 do_raw_spin_lock+0x29/0x13c _raw_spin_lock+0x1e/0x22 nouveau_fence_update+0x2d/0xf1 nouveau_channel_idle+0x22/0xa0 nouveau_channel_put_unlocked+0x84/0x1bd nouveau_channel_put+0x20/0x24 nouveau_channel_alloc+0x4ec/0x585 nouveau_ioctl_fifo_alloc+0x50/0x130 drm_ioctl+0x289/0x361 do_vfs_ioctl+0x4dd/0x52c sys_ioctl+0x42/0x65 system_call_fastpath+0x16/0x1b It's easily triggerable from userspace. Additionally remove double initialization of chan->fence.pending. Signed-off-by: Marcin Slusarz Signed-off-by: Ben Skeggs Signed-off-by: Greg Kroah-Hartman

drm/i915: Fix object refcount leak on mmappable size limit error path.

2011-11-21T22:31:15Z

commit 14660ccd599dc7bd6ecef17408bd76dc853f9b77 upstream. I've been seeing memory leaks on my system in the form of large (300-400MB) GEM objects created by now-dead processes laying around clogging up memory. I usually notice when it gets to about 1.2GB of them. Hopefully this clears up the issue, but I just found this bug by inspection. Signed-off-by: Eric Anholt Signed-off-by: Keith Packard Signed-off-by: Greg Kroah-Hartman

drm/radeon/kms: set HPD polarity in hpd_init()

2011-11-11T17:36:56Z

commit 64912e997f0fe13512e4c7b90e4f7c11cb922ab5 upstream. Polarity needs to be set accordingly to connector status (connected or disconnected). Set it up in hpd_init() so first hotplug works reliably no matter what is the initial set of connector. hpd_init() also covers resume so HPD will work correctly after resume as well. Signed-off-by: Alex Deucher Cc: Jerome Glisse Signed-off-by: Dave Airlie Signed-off-by: Greg Kroah-Hartman

drm/radeon/kms: add MSI module parameter

2011-11-11T17:36:56Z

commit a18cee15ed4c8b6a35f96b7b26a46bac32e04bd9 upstream. Allow the user to override whether MSIs are enabled or not on supported ASICs. MSIs are disabled by default on IGP chips as they tend not to work. However certain IGP chips only seem to work with MSIs enabled. I suspect this is a chipset or bios issue, but I'm not sure what the proper fix is. This will at least make diagnosing and working around the problem much easier. See: https://bugs.freedesktop.org/show_bug.cgi?id=37679 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie Signed-off-by: Greg Kroah-Hartman

drm/radeon/kms: Add MSI quirk for Dell RS690

2011-11-11T17:36:55Z

commit 01e718ec194e30b3e8eb3858c742c13649757efc upstream. Some Dell laptops only seem to work with MSIs. This looks like a platform/bios bug. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=37679 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie Signed-off-by: Greg Kroah-Hartman

drm/radeon/kms: properly set panel mode for eDP

2011-11-11T17:36:54Z

commit 00dfb8df5bf8c3afe4c0bb8361133156b06b7a2c upstream. This should make eDP more reliable. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie Signed-off-by: Greg Kroah-Hartman

drm/radeon: set hpd polarity at init time so hotplug detect works

2011-11-11T17:36:53Z

commit 8ab250d4484b72ccc78e34276c5ffa84c1d41303 upstream. Polarity needs to be set accordingly to connector status (connected or disconnected). Set it up at module init so first hotplug works reliably no matter what is the initial set of connector. Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie Signed-off-by: Greg Kroah-Hartman

drm/radeon/kms: Add MSI quirk for HP RS690

2011-11-11T17:36:52Z

commit b362105f7f5223fa4d2e03ceeea0e51da754ccc6 upstream. Some HP laptops only seem to work with MSIs. This looks like a platform/bios bug. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=37679 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie Signed-off-by: Greg Kroah-Hartman