linux/drivers/gpu/drm, branch v3.4.100

drm/radeon: avoid leaking edid data

2014-07-28T14:06:46Z

commit 0ac66effe7fcdee55bda6d5d10d3372c95a41920 upstream. In some cases we fetch the edid in the detect() callback in order to determine what sort of monitor is connected. If that happens, don't fetch the edid again in the get_modes() callback or we will leak the edid. Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman

drm/radeon: stop poisoning the GART TLB

2014-07-17T22:39:50Z

commit 0986c1a55ca64b44ee126a2f719a6e9f28cbe0ed upstream. When we set the valid bit on invalid GART entries they are loaded into the TLB when an adjacent entry is loaded. This poisons the TLB with invalid entries which are sometimes not correctly removed on TLB flush. For stable inclusion the patch probably needs to be modified a bit. Signed-off-by: Christian König Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman

drm/vmwgfx: Fix incorrect write to read-only register v2:

2014-07-09T17:51:20Z

commit 4e578080ed3262ed2c3985868539bc66218d25c0 upstream. Commit "drm/vmwgfx: correct fb_fix_screeninfo.line_length", while fixing a vmwgfx fbdev bug, also writes the pitch to a supposedly read-only register: SVGA_REG_BYTES_PER_LINE, while it should be (and also in fact is) written to SVGA_REG_PITCHLOCK. This patch is Cc'd stable because of the unknown effects writing to this register might have, particularly on older device versions. v2: Updated log message. Cc: Christopher Friedt Tested-by: Christopher Friedt Signed-off-by: Thomas Hellstrom Reviewed-by: Jakob Bornecrantz Signed-off-by: Greg Kroah-Hartman

drm/radeon/atom: fix dithering on certain panels

2014-07-09T17:51:20Z

commit 642528355c694f5ed68f6bff9ff520326a249f99 upstream. We need to specify the encoder mode as LVDS for eDP when using the Crtc_Source atom table in order to properly set up the FMT hardware. bug: https://bugs.freedesktop.org/show_bug.cgi?id=73911 Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman

drm/radeon: fix typo in radeon_connector_is_dp12_capable()

2014-07-09T17:51:20Z

commit af5d36539dfe043f1cf0f8b7334d6bb12cd14e75 upstream. We were checking the ext clock rather than the display clock. Noticed by ArtForz on IRC. Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman

drm/radeon: only apply hdmi bpc pll flags when encoder mode is hdmi

2014-07-09T17:51:20Z

commit 7d5ab3009a8ca777174f6f469277b3922d56fd4b upstream. May fix display issues with non-HDMI displays. Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman

drm/radeon: always program the MC on startup

2014-06-07T23:02:13Z

commit 6fab3febf6d949b0a12b1e4e73db38e4a177a79e upstream. For r6xx+ asics. This mirrors the behavior of pre-r6xx asics. We need to program the MC even if something else in startup() fails. Failure to do so results in an unusable GPU. Based on a fix from: Mark Kettenis Signed-off-by: Alex Deucher [wml: Backported to 3.4: - adjust context - drop changes to cik.c] Signed-off-by: Weng Meiling Signed-off-by: Greg Kroah-Hartman

drm/radeon: fix hdmi mode enable on RS600/RS690/RS740

2014-06-07T23:02:13Z

commit dcb852905772416e322536ced5cb3c796d176af5 upstream. These chips were previously skipped since they are pre-R600. Signed-off-by: Alex Deucher [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings [wml: Backported to 3.4: - adjust context - no !ASIC_IS_DCE3(rdev)] Signed-off-by: Weng Meiling Signed-off-by: Greg Kroah-Hartman

drm/ttm: Fix memory type compatibility check

2014-06-07T23:02:13Z

commit 59c8e66378fb78adbcd05f0d09783dde6fef282b upstream. Also check the busy placements before deciding to move a buffer object. Failing to do this may result in a completely unneccessary move within a single memory type. Signed-off-by: Thomas Hellstrom Reviewed-by: Jakob Bornecrantz [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings Cc: Weng Meiling Signed-off-by: Greg Kroah-Hartman

drm/radeon: fix panel scaling with eDP and LVDS bridges

2014-06-07T23:02:13Z

commit 855f5f1d882a34e4e9dd27b299737cd3508a5624 upstream. We were using the wrong set_properly callback so we always ended up with Full scaling even if something else (Center or Full aspect) was selected. Signed-off-by: Alex Deucher [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings Cc: Weng Meiling Signed-off-by: Greg Kroah-Hartman