linux/drivers/firewire, branch v3.3

firewire: ohci: disable MSI on Ricoh controllers

2012-01-30T20:33:34Z

The PCIe device FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd FireWire Host Controller [1180:e832] (prog-if 10 [OHCI]) is unable to access attached FireWire devices when MSI is enabled but works if MSI is disabled. http://www.mail-archive.com/alsa-user@lists.sourceforge.net/msg28251.html Hence add the "disable MSI" quirks flag for this device, or in fact for safety and simplicity for all current (R5U230, R5U231, R5U240) and future Ricoh PCIe 1394 controllers. Reported-by: Stefan Thomas Cc: 2.6.36+ Signed-off-by: Stefan Richter

firewire: ohci: add reset packet quirk for SB Audigy

2012-01-26T21:53:17Z

The Audigy's SB1394 controller is actually from Texas Instruments and has the same bus reset packet generation bug, so it needs the same quirk entry. Signed-off-by: Clemens Ladisch Cc: 2.6.36+ Signed-off-by: Stefan Richter

module_param: make bool parameters really bool (drivers & misc)

2012-01-12T23:02:20Z

module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab Signed-off-by: Rusty Russell

Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

2011-11-07T03:44:47Z

* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include net: sch_generic remove redundant use of net: inet_timewait_sock doesnt need ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h

drivers/firewire: Add export.h for EXPORT_SYMBOL to core-iso.c

2011-10-31T23:31:46Z

Ensure that the EXPORT_SYMBOL macros are present for when we clean up the "module.h" is everywhere situation, to prevent build failures. Signed-off-by: Paul Gortmaker

firewire: ohci: fix isochronous DMA synchronization

2011-10-18T10:32:39Z

Add the dma_sync_single_* calls necessary to ensure proper cache synchronization for isochronous data buffers on non-coherent architectures. Signed-off-by: Clemens Ladisch Signed-off-by: Stefan Richter

firewire: ohci: work around selfID junk due to wrong gap count

2011-10-18T10:32:39Z

If a device's firmware initiates a bus reset by setting the IBR bit in PHY register 1 without resetting the gap count field to 63 (and without having sent a PHY configuration packet beforehand), the gap count of this node will remain at the old value after the bus reset and thus be inconsistent with the gap count on all other nodes. The bus manager is supposed to detect the inconsistent gap count values in the self ID packets and correct them by issuing another bus reset. However, if the buggy device happens to be the cycle master, and if it sends a cycle start packet immediately after the bus reset (which is likely after a long bus reset), then the time between the end of the selfID phase and the start of the cycle start packet will be based on the too-small gap count value, so this gap will be too short to be detected as a subaction gap by the other nodes. This means that the cycle start packet will be assumed to be self ID data, and will be stored after the actual self ID quadlets in the self ID buffer. This garbage in the self ID buffer made firewire-core ignore all of the self ID data, and thus prevented the Linux bus manager from correcting the problem. Furthermore, because the bus reset handling was aborted completely, asynchronous transfers would be no longer handled correctly, and fw_run_transaction() would hang until the next bus reset. To fix this, make the detection of inconsistent self IDs more discriminating: If the invalid data in the self ID buffer looks like a cycle start packet, we can assume that the previous data in the buffer is correctly received self ID information, and process it normally. (We inspect only the first quadlet of the cycle start packet, because this value is different enough from any valid self ID quadlet, and many controllers do not store the cycle start packet in five quadlets because they expect self ID data to have an even number of quadlets.) This bug has been observed when a bus-powered DesktopKonnekt6 is switched off with its power button. Signed-off-by: Clemens Ladisch Signed-off-by: Stefan Richter

firewire: net: Use posted writes

2011-10-09T15:00:18Z

Change memory region to ohci "middle address space". This effectively reduces the number of packets by 50%. [Stefan R.:] This eliminates 1394 ack packets and improved throughput by a few percent in some tests with an S400a connection with and without gap count optimization. Since firewire-net taxes the AR-req DMA unit of a FireWire controller much more than firewire-sbp2 (which uses the middle address space with PCI posted writes too), this commit also changes a related error printk into a ratelimited one as a precaution. Side note: The IPv4-over-1394 drivers of Mac OS X 10.4, Windows XP SP3, and the Thesycon 1394 bus driver for Windows all use the middle address space too. Signed-off-by: Stephan Gatzka Signed-off-by: Stefan Richter

firewire: use clamp and min3 macros

2011-10-09T15:00:18Z

Use kernel.h's convenience macros. Also omit a printk that should never happen and won't matter much if it ever happened. Signed-off-by: Stefan Richter

firewire: ohci: optimize TSB41BA3D detection

2011-10-09T15:00:17Z

Takes less source code and machine code, and less runtime with PHYs other than TSB41BA3D (e.g. TSB81BA3 with device ID 0x831304 which takes one instead of six read_paged_phy_reg now). Signed-off-by: Stefan Richter