linux/drivers/dma, branch v3.8.11

dmaengine: omap-dma: Start DMA without delay for cyclic channels

2013-04-17T04:48:28Z

commit 765024697807ad1e1cac332aa891253ca4a339da upstream. cyclic DMA is only used by audio which needs DMA to be started without a delay. If the DMA for audio is started using the tasklet we experience random channel switch (to be more precise: channel shift). Reported-by: Peter Meerwald Signed-off-by: Peter Ujfalusi Acked-by: Santosh Shilimkar Acked-by: Russell King Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dma: sh: Don't use ENODEV for failing slave lookup

2013-02-28T13:38:42Z

commit 7c1119bdd650fa58dad8157bc75c5fcf6ed97843 upstream. If dmaengine driver's .device_alloc_chan_resources() method returns -ENODEV, dma_request_channel() will decide, that the driver has been removed and will remove the device from its list. To prevent this use ENXIO if a slave lookup fails. Reported-by: Kuninori Morimoto Signed-off-by: Guennadi Liakhovetski Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma

2013-01-24T18:17:49Z

Pull slave-dmaengine fixes from Vinod Koul: "A few fixes on slave dmanengine. There are trivial fixes in imx-dma, tegra-dma & ioat driver" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma: tegra: implement flags parameters for cyclic transfer dmaengine: imx-dma: Disable use of hw_chain to fix sg_dma transfers. ioat: Fix DMA memory sync direction correct flag

dma: tegra: implement flags parameters for cyclic transfer

2013-01-09T14:13:32Z

The flag parameter is added in the cyclic transfer request. Use the flag option of: - DMA_PREP_INTERRUPT for enabling interrupt. - DMA_CTRL_ACK for deciding whether ack is requred or not for descriptor. Signed-off-by: Laxman Dewangan CC: Signed-off-by: Vinod Koul

Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2013-01-09T02:53:56Z

Pull ARM SoC fixes from Olof Johansson: "People are back from the holiday breaks, and it shows. Here are a bunch of fixes for a number of platforms: - A couple of small fixes for Nomadik - A larger set of changes for kirkwood/mvebu - uart driver selection, dt clocks, gpio-poweroff fixups, a few __init annotation fixes and some error handling improvement in their xor dma driver. - i.MX had a couple of minor fixes (and a critical one for flexcan2 clock setup) - MXS has a small board fix and a framebuffer bugfix - A set of fixes for Samsung Exynos, fixing default bootargs and some Exynos5440 clock issues - A set of OMAP changes including PM fixes and a few sparse warning fixups All in all a bit more positive code delta than we'd ideally want to see here, mostly from the OMAP PM changes, but nothing overly crazy." * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits) ARM: clps711x: Fix bad merge of clockevents setup ARM: highbank: save and restore L2 cache and GIC on suspend ARM: highbank: add a power request clear ARM: highbank: fix secondary boot and hotplug ARM: highbank: fix typos with hignbank in power request functions ARM: dts: fix highbank cpu mpidr values ARM: dts: add device_type prop to cpu nodes on Calxeda platforms ARM: mx5: Fix MX53 flexcan2 clock ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array pinctrl: mvebu: make pdma clock on dove mandatory ARM: Dove: Add pinctrl clock to DT dma: mv_xor: fix error handling for clocks dma: mv_xor: fix error handling of mv_xor_channel_add() arm: mvebu: Add missing ; for cpu node. arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces arm: mvebu: Armada XP MV78230 has two cores, not one clk: mvebu: Remove inappropriate __init tagging ARM: Kirkwood: Use fixed-regulator instead of board gpio call ARM: Kirkwood: Fix missing sdio clock ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers ...

dmaengine: imx-dma: Disable use of hw_chain to fix sg_dma transfers.

2013-01-08T15:44:56Z

HW chaining is currently broken in imx-dma. It can be easily reproduced doing intensive accesses to a external MMC card and checking how the file system is corrupted. Preventing the driver to use HW chaining solves these issues. Signed-off-by: Javier Martin Signed-off-by: Vinod Koul

dma: mv_xor: fix error handling for clocks

2013-01-06T17:53:28Z

When a channel fails to initialize, we release all ressources, including clocks. However, a XOR unit is not necessarily associated to a clock (some variants of Marvell SoCs have a clock for XOR units, some don't), so we shouldn't unconditionally be releasing the clock. Instead, just like we do in the mv_xor_remove() function, we should check if one clock was found before releasing it. Signed-off-by: Thomas Petazzoni Signed-off-by: Jason Cooper

dma: mv_xor: fix error handling of mv_xor_channel_add()

2013-01-06T17:53:25Z

When mv_xor_channel_add() fails for one XOR channel, we jump to the err_channel_add label to clean up all previous channels that had been initialized correctly. Unfortunately, while handling this error condition, we were disposing the IRQ mapping before calling mv_xor_channel_remove() (which does the free_irq()), which is incorrect. Instead, do things properly in the reverse order of the initialization: first remove the XOR channel (so that free_irq() is done), and then dispose the IRQ mapping. This avoids ugly warnings when for some reason one of the XOR channel fails to initialize. Signed-off-by: Thomas Petazzoni Signed-off-by: Jason Cooper

ioat: Fix DMA memory sync direction correct flag

2013-01-06T16:36:34Z

ioat does DMA memory sync with DMA_TO_DEVICE direction on a buffer allocated for DMA_FROM_DEVICE dma, resulting in the following warning from dma debug. Fixed the dma_sync_single_for_device() call to use the correct direction. [ 226.288947] WARNING: at lib/dma-debug.c:990 check_sync+0x132/0x550() [ 226.288948] Hardware name: ProLiant DL380p Gen8 [ 226.288951] ioatdma 0000:00:04.0: DMA-API: device driver syncs DMA memory with different direction [device address=0x00000000ffff7000] [size=4096 bytes] [mapped with DMA_FROM_DEVICE] [synced with DMA_TO_DEVICE] [ 226.288953] Modules linked in: iTCO_wdt(+) sb_edac(+) ioatdma(+) microcode serio_raw pcspkr edac_core hpwdt(+) iTCO_vendor_support hpilo(+) dca acpi_power_meter ata_generic pata_acpi sd_mod crc_t10dif ata_piix libata hpsa tg3 netxen_nic(+) sunrpc dm_mirror dm_region_hash dm_log dm_mod [ 226.288967] Pid: 1055, comm: work_for_cpu Tainted: G W 3.3.0-0.20.el7.x86_64 #1 [ 226.288968] Call Trace: [ 226.288974] [] warn_slowpath_common+0x7f/0xc0 [ 226.288977] [] warn_slowpath_fmt+0x46/0x50 [ 226.288980] [] check_sync+0x132/0x550 [ 226.288983] [] debug_dma_sync_single_for_device+0x3f/0x50 [ 226.288988] [] ? wait_for_common+0x72/0x180 [ 226.288995] [] ioat_xor_val_self_test+0x3e5/0x832 [ioatdma] [ 226.288999] [] ? kfree+0x259/0x270 [ 226.289004] [] ioat3_dma_self_test+0x1b/0x20 [ioatdma] [ 226.289008] [] ioat_probe+0x2f8/0x348 [ioatdma] [ 226.289011] [] ioat3_dma_probe+0x1d5/0x2aa [ioatdma] [ 226.289016] [] ioat_pci_probe+0x139/0x17c [ioatdma] [ 226.289020] [] local_pci_probe+0x5c/0xd0 [ 226.289023] [] ? destroy_work_on_stack+0x20/0x20 [ 226.289025] [] do_work_for_cpu+0x18/0x30 [ 226.289029] [] kthread+0xb7/0xc0 [ 226.289033] [] kernel_thread_helper+0x4/0x10 [ 226.289036] [] ? _raw_spin_unlock_irq+0x30/0x50 [ 226.289038] [] ? retint_restore_args+0x13/0x13 [ 226.289041] [] ? kthread_worker_fn+0x1a0/0x1a0 [ 226.289044] [] ? gs_change+0x13/0x13 [ 226.289045] ---[ end trace e1618afc7a606089 ]--- [ 226.289047] Mapped at: [ 226.289048] [] debug_dma_map_page+0x87/0x150 [ 226.289050] [] dma_map_page.constprop.18+0x70/0xb34 [ioatdma] [ 226.289054] [] ioat_xor_val_self_test+0x1d8/0x832 [ioatdma] [ 226.289058] [] ioat3_dma_self_test+0x1b/0x20 [ioatdma] [ 226.289061] [] ioat_probe+0x2f8/0x348 [ioatdma] Signed-off-by: Shuah Khan CC: Signed-off-by: Vinod Koul

Drivers: dma: remove __dev* attributes.

2013-01-03T23:57:15Z

CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton Cc: Viresh Kumar Cc: Dan Williams Cc: Vinod Koul Cc: Barry Song Cc: Jeff Kirsher Cc: Alexander Duyck Cc: Russell King Cc: Linus Walleij Cc: Jassi Brar Cc: Dave Jiang Cc: Bill Pemberton Cc: Guennadi Liakhovetski Signed-off-by: Greg Kroah-Hartman