linux/drivers/block, branch v3.10.25

xen/blkback: fix reference counting

2013-12-04T18:56:25Z

commit ea5ec76d76da9279d12027c1828544c5ccbe7932 upstream. If the permission check fails, we drop a reference to the blkif without having taken it in the first place. The bug was introduced in commit 604c499cbbcc3d5fe5fb8d53306aa0fae1990109 (xen/blkback: Check device permissions before allowing OP_DISCARD). Cc: Jan Beulich Cc: Konrad Rzeszutek Wilk Signed-off-by: Vegard Nossum Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

loop: fix crash when using unassigned loop device

2013-12-04T18:56:20Z

commit ef7e7c82e02b602f29c2b87f42dcd6143a6777da upstream. When the loop module is loaded, it creates 8 loop devices /dev/loop[0-7]. The devices have no request routine and thus, when they are used without being assigned, a crash happens. For example, these commands cause crash (assuming there are no used loop devices): Kernel Fault: Code=26 regs=000000007f420980 (Addr=0000000000000010) CPU: 1 PID: 50 Comm: kworker/1:1 Not tainted 3.11.0 #1 Workqueue: ksnaphd do_metadata [dm_snapshot] task: 000000007fcf4078 ti: 000000007f420000 task.ti: 000000007f420000 [ 116.319988] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00001000000001001111111100001111 Not tainted r00-03 000000ff0804ff0f 00000000408bf5d0 00000000402d8204 000000007b7ff6c0 r04-07 00000000408a95d0 000000007f420950 000000007b7ff6c0 000000007d06c930 r08-11 000000007f4205c0 0000000000000001 000000007f4205c0 000000007f4204b8 r12-15 0000000000000010 0000000000000000 0000000000000000 0000000000000000 r16-19 000000001108dd48 000000004061cd7c 000000007d859800 000000000800000f r20-23 0000000000000000 0000000000000008 0000000000000000 0000000000000000 r24-27 00000000ffffffff 000000007b7ff6c0 000000007d859800 00000000408a95d0 r28-31 0000000000000000 000000007f420950 000000007f420980 000000007f4208e8 sr00-03 0000000000000000 0000000000000000 0000000000000000 0000000000303000 sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 117.549988] IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000402d82fc 00000000402d8300 IIR: 53820020 ISR: 0000000000000000 IOR: 0000000000000010 CPU: 1 CR30: 000000007f420000 CR31: ffffffffffffffff ORIG_R28: 0000000000000001 IAOQ[0]: generic_make_request+0x11c/0x1a0 IAOQ[1]: generic_make_request+0x120/0x1a0 RP(r2): generic_make_request+0x24/0x1a0 Backtrace: [<00000000402d83f0>] submit_bio+0x70/0x140 [<0000000011087c4c>] dispatch_io+0x234/0x478 [dm_mod] [<0000000011087f44>] sync_io+0xb4/0x190 [dm_mod] [<00000000110883bc>] dm_io+0x2c4/0x310 [dm_mod] [<00000000110bfcd0>] do_metadata+0x28/0xb0 [dm_snapshot] [<00000000401591d8>] process_one_work+0x160/0x460 [<0000000040159bc0>] worker_thread+0x300/0x478 [<0000000040161a70>] kthread+0x118/0x128 [<0000000040104020>] end_fault_vector+0x20/0x28 [<0000000040177220>] task_tick_fair+0x420/0x4d0 [<00000000401aa048>] invoke_rcu_core+0x50/0x60 [<00000000401ad5b8>] rcu_check_callbacks+0x210/0x8d8 [<000000004014aaa0>] update_process_times+0xa8/0xc0 [<00000000401ab86c>] rcu_process_callbacks+0x4b4/0x598 [<0000000040142408>] __do_softirq+0x250/0x2c0 [<00000000401789d0>] find_busiest_group+0x3c0/0xc70 [ 119.379988] Kernel panic - not syncing: Kernel Fault Rebooting in 1 seconds.. Signed-off-by: Mikulas Patocka Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

loop: fix crash if blk_alloc_queue fails

2013-12-04T18:56:18Z

commit 3ec981e30fae1f3c8728a05c730acaa1f627bcfb upstream. loop: fix crash if blk_alloc_queue fails If blk_alloc_queue fails, loop_add cleans up, but it doesn't clean up the identifier allocated with idr_alloc. That causes crash on module unload in idr_for_each(&loop_index_idr, &loop_exit_cb, NULL); where we attempt to remove non-existed device with that id. BUG: unable to handle kernel NULL pointer dereference at 0000000000000380 IP: [] del_gendisk+0x19/0x2d0 PGD 43d399067 PUD 43d0ad067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: loop(-) dm_snapshot dm_zero dm_mirror dm_region_hash dm_log dm_loop dm_mod ip6table_filter ip6_tables uvesafb cfbcopyarea cfbimgblt cfbfillrect fbcon font bitblit fbcon_rotate fbcon_cw fbcon_ud fbcon_ccw softcursor fb fbdev msr ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 xt_state ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc tun ipv6 cpufreq_userspace cpufreq_stats cpufreq_ondemand cpufreq_conservative cpufreq_powersave spadfs fuse hid_generic usbhid hid raid0 md_mod dmi_sysfs nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack snd_usb_audio snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc lm85 hwmon_vid snd_hwdep snd_usbmidi_lib snd_rawmidi snd soundcore acpi_cpufreq ohci_hcd freq_table tg3 ehci_pci mperf ehci_hcd kvm_amd kvm sata_svw serverworks libphy libata ide_core k10temp usbcore hwmon microcode ptp pcspkr pps_core e100 skge mii usb_common i2c_piix4 floppy evdev rtc_cmos i2c_core processor but! ton unix CPU: 7 PID: 2735 Comm: rmmod Tainted: G W 3.10.15-devel #15 Hardware name: empty empty/S3992-E, BIOS 'V1.06 ' 06/09/2009 task: ffff88043d38e780 ti: ffff88043d21e000 task.ti: ffff88043d21e000 RIP: 0010:[] [] del_gendisk+0x19/0x2d0 RSP: 0018:ffff88043d21fe10 EFLAGS: 00010282 RAX: ffffffffa05102e0 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88043ea82800 RDI: 0000000000000000 RBP: ffff88043d21fe48 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 00000000000000ff R13: 0000000000000080 R14: 0000000000000000 R15: ffff88043ea82800 FS: 00007ff646534700(0000) GS:ffff880447000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000380 CR3: 000000043e9bf000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffffffff8100aba4 0000000000000092 ffff88043d21fe48 ffff88043ea82800 00000000000000ff ffff88043d21fe98 0000000000000000 ffff88043d21fe60 ffffffffa05102b4 0000000000000000 ffff88043d21fe70 ffffffffa05102ec Call Trace: [] ? native_sched_clock+0x24/0x80 [] loop_remove+0x14/0x40 [loop] [] loop_exit_cb+0xc/0x10 [loop] [] idr_for_each+0x104/0x190 [] ? loop_remove+0x40/0x40 [loop] [] ? trace_hardirqs_on_caller+0x105/0x1d0 [] loop_exit+0x34/0xa58 [loop] [] SyS_delete_module+0x13a/0x260 [] ? trace_hardirqs_on_thunk+0x3a/0x3f [] system_call_fastpath+0x1a/0x1f Code: f0 4c 8b 6d f8 c9 c3 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 56 41 55 4c 8d af 80 00 00 00 41 54 53 48 89 fb 48 83 ec 18 <48> 83 bf 80 03 00 00 00 74 4d e8 98 fe ff ff 31 f6 48 c7 c7 20 RIP [] del_gendisk+0x19/0x2d0 RSP CR2: 0000000000000380 ---[ end trace 64ec069ec70f1309 ]--- Signed-off-by: Mikulas Patocka Acked-by: Tejun Heo Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

block: fix a probe argument to blk_register_region

2013-11-29T19:11:50Z

commit a207f5937630dd35bd2550620bef416937a1365e upstream. The probe function is supposed to return NULL on failure (as we can see in kobj_lookup: kobj = probe(dev, index, data); ... if (kobj) return kobj; However, in loop and brd, it returns negative error from ERR_PTR. This causes a crash if we simulate disk allocation failure and run less -f /dev/loop0 because the negative number is interpreted as a pointer: BUG: unable to handle kernel NULL pointer dereference at 00000000000002b4 IP: [] __blkdev_get+0x28/0x450 PGD 23c677067 PUD 23d6d1067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: loop hpfs nvidia(PO) ip6table_filter ip6_tables uvesafb cfbcopyarea cfbimgblt cfbfillrect fbcon font bitblit fbcon_rotate fbcon_cw fbcon_ud fbcon_ccw softcursor fb fbdev msr ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 xt_state ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc tun ipv6 cpufreq_stats cpufreq_ondemand cpufreq_userspace cpufreq_powersave cpufreq_conservative hid_generic spadfs usbhid hid fuse raid0 snd_usb_audio snd_pcm_oss snd_mixer_oss md_mod snd_pcm snd_timer snd_page_alloc snd_hwdep snd_usbmidi_lib dmi_sysfs snd_rawmidi nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack snd soundcore lm85 hwmon_vid ohci_hcd ehci_pci ehci_hcd serverworks sata_svw libata acpi_cpufreq freq_table mperf ide_core usbcore kvm_amd kvm tg3 i2c_piix4 libphy microcode e100 usb_common ptp skge i2c_core pcspkr k10temp evdev floppy hwmon pps_core mii rtc_cmos button processor unix [last unloaded: nvidia] CPU: 1 PID: 6831 Comm: less Tainted: P W O 3.10.15-devel #18 Hardware name: empty empty/S3992-E, BIOS 'V1.06 ' 06/09/2009 task: ffff880203cc6bc0 ti: ffff88023e47c000 task.ti: ffff88023e47c000 RIP: 0010:[] [] __blkdev_get+0x28/0x450 RSP: 0018:ffff88023e47dbd8 EFLAGS: 00010286 RAX: ffffffffffffff74 RBX: ffffffffffffff74 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000001 RBP: ffff88023e47dc18 R08: 0000000000000002 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff88023f519658 R13: ffffffff8118c300 R14: 0000000000000000 R15: ffff88023f519640 FS: 00007f2070bf7700(0000) GS:ffff880247400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000002b4 CR3: 000000023da1d000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: 0000000000000002 0000001d00000000 000000003e47dc50 ffff88023f519640 ffff88043d5bb668 ffffffff8118c300 ffff88023d683550 ffff88023e47de60 ffff88023e47dc98 ffffffff8118c10d 0000001d81605698 0000000000000292 Call Trace: [] ? blkdev_get_by_dev+0x60/0x60 [] blkdev_get+0x1dd/0x370 [] ? blkdev_get_by_dev+0x60/0x60 [] ? _raw_spin_unlock+0x2c/0x50 [] ? blkdev_get_by_dev+0x60/0x60 [] blkdev_open+0x65/0x80 [] do_dentry_open.isra.18+0x23e/0x2f0 [] finish_open+0x34/0x50 [] do_last.isra.62+0x2d2/0xc50 [] path_openat.isra.63+0xb8/0x4d0 [] ? might_fault+0x4e/0xa0 [] do_filp_open+0x40/0x90 [] ? _raw_spin_unlock+0x2c/0x50 [] ? __alloc_fd+0xa5/0x1f0 [] do_sys_open+0xef/0x1d0 [] SyS_open+0x19/0x20 [] system_call_fastpath+0x1a/0x1f Code: 44 00 00 55 48 89 e5 41 57 49 89 ff 41 56 41 89 d6 41 55 41 54 4c 8d 67 18 53 48 83 ec 18 89 75 cc e9 f2 00 00 00 0f 1f 44 00 00 <48> 8b 80 40 03 00 00 48 89 df 4c 8b 68 58 e8 d5 a4 07 00 44 89 RIP [] __blkdev_get+0x28/0x450 RSP CR2: 00000000000002b4 ---[ end trace bb7f32dbf02398dc ]--- The brd change should be backported to stable kernels starting with 2.6.25. The loop change should be backported to stable kernels starting with 2.6.22. Signed-off-by: Mikulas Patocka Acked-by: Tejun Heo Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

cciss: fix info leak in cciss_ioctl32_passthru()

2013-10-13T23:08:28Z

commit 58f09e00ae095e46ef9edfcf3a5fd9ccdfad065e upstream. The arg64 struct has a hole after ->buf_size which isn't cleared. Or if any of the calls to copy_from_user() fail then that would cause an information leak as well. This was assigned CVE-2013-2147. Signed-off-by: Dan Carpenter Acked-by: Mike Miller Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

cpqarray: fix info leak in ida_locked_ioctl()

2013-10-13T23:08:28Z

commit 627aad1c01da6f881e7f98d71fd928ca0c316b1a upstream. The pciinfo struct has a two byte hole after ->dev_fn so stack information could be leaked to the user. This was assigned CVE-2013-2147. Signed-off-by: Dan Carpenter Acked-by: Mike Miller Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

rbd: fix I/O error propagation for reads

2013-09-27T00:18:29Z

commit 17c1cc1d9293a568a00545469078e29555cc7f39 upstream. When a request returns an error, the driver needs to report the entire extent of the request as completed. Writes already did this, since they always set xferred = length, but reads were skipping that step if an error other than -ENOENT occurred. Instead, rbd would end up passing 0 xferred to blk_end_request(), which would always report needing more data. This resulted in an assert failing when more data was required by the block layer, but all the object requests were done: [ 1868.719077] rbd: obj_request read result -108 xferred 0 [ 1868.719077] [ 1868.719518] end_request: I/O error, dev rbd1, sector 0 [ 1868.719739] [ 1868.719739] Assertion failure in rbd_img_obj_callback() at line 1736: [ 1868.719739] [ 1868.719739] rbd_assert(more ^ (which == img_request->obj_request_count)); Without this assert, reads that hit errors would hang forever, since the block layer considered them incomplete. Fixes: http://tracker.ceph.com/issues/5647 Signed-off-by: Josh Durgin Reviewed-by: Alex Elder Signed-off-by: Greg Kroah-Hartman

xen-blkfront: use a different scatterlist for each request

2013-08-12T01:35:24Z

commit b7649158a0d241f8d53d13ff7441858539e16656 upstream. In blkif_queue_request blkfront iterates over the scatterlist in order to set the segments of the request, and in blkif_completion blkfront iterates over the raw request, which makes it hard to know the exact position of the source and destination memory positions. This can be solved by allocating a scatterlist for each request, that will be keep until the request is finished, allowing us to copy the data back to the original memory without having to iterate over the raw request. Oracle-Bug: 16660413 - LARGE ASYNCHRONOUS READS APPEAR BROKEN ON 2.6.39-400 CC: stable@vger.kernel.org Signed-off-by: Roger Pau Monné Reported-and-Tested-by: Anne Milicia Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Greg Kroah-Hartman

xen/blkback: Check device permissions before allowing OP_DISCARD

2013-08-04T08:50:53Z

commit 604c499cbbcc3d5fe5fb8d53306aa0fae1990109 upstream. We need to make sure that the device is not RO or that the request is not past the number of sectors we want to issue the DISCARD operation for. This fixes CVE-2013-2140. Acked-by: Jan Beulich Acked-by: Ian Campbell [v1: Made it pr_warn instead of pr_debug] Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Greg Kroah-Hartman

nbd: correct disconnect behavior

2013-07-22T01:21:29Z

commit c378f70adbc1bbecd9e6db145019f14b2f688c7c upstream. Currently, when a disconnect is requested by the user (via NBD_DISCONNECT ioctl) the return from NBD_DO_IT is undefined (it is usually one of several error codes). This means that nbd-client does not know if a manual disconnect was performed or whether a network error occurred. Because of this, nbd-client's persist mode (which tries to reconnect after error, but not after manual disconnect) does not always work correctly. This change fixes this by causing NBD_DO_IT to always return 0 if a user requests a disconnect. This means that nbd-client can correctly either persist the connection (if an error occurred) or disconnect (if the user requested it). Signed-off-by: Paul Clements Acked-by: Rob Landley Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman