linux/drivers/base, branch v3.0.10

PM / Runtime: Automatically retry failed autosuspends

2011-11-11T17:36:57Z

commit 886486b792e4f6f96d4fbe8ec5bf20811cab7d6a upstream. Originally, the runtime PM core would send an idle notification whenever a suspend attempt failed. The idle callback routine could then schedule a delayed suspend for some time later. However this behavior was changed by commit f71648d73c1650b8b4aceb3856bebbde6daa3b86 (PM / Runtime: Remove idle notification after failing suspend). No notifications were sent, and there was no clear mechanism to retry failed suspends. This caused problems for the usbhid driver, because it fails autosuspend attempts as long as a key is being held down. Therefore this patch (as1492) adds a mechanism for retrying failed autosuspends. If the callback routine updates the last_busy field so that the next autosuspend expiration time is in the future, the autosuspend will automatically be rescheduled. Signed-off-by: Alan Stern Tested-by: Henrik Rydberg Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

firmware loader: allow builtin firmware load even if usermodehelper is disabled

2011-10-03T18:41:07Z

commit caca9510ff4e5d842c0589110243d60927836222 upstream. In commit a144c6a6c924 ("PM: Print a warning if firmware is requested when tasks are frozen") we not only printed a warning if somebody tried to load the firmware when tasks are frozen - we also failed the load. But that check was done before the check for built-in firmware, and then when we disallowed usermode helpers during bootup (commit 288d5abec831: "Boot up with usermodehelper disabled"), that actually means that built-in modules can no longer load their firmware even if the firmware is built in too. Which used to work, and some people depended on it for the R100 driver. So move the test for usermodehelper_is_disabled() down, to after checking the built-in firmware. This should fix: https://bugzilla.kernel.org/show_bug.cgi?id=40952 Reported-by: James Cloos Bisected-by: Elimar Riesebieter Cc: Michel Dänzer Cc: Rafael Wysocki Cc: Greg Kroah-Hartman Cc: Valdis Kletnieks Signed-off-by: Linus Torvalds Cc: Borislav Petkov Cc: Lucas Villa Real Signed-off-by: Greg Kroah-Hartman

mm: Move definition of MIN_MEMORY_BLOCK_SIZE to a header

2011-07-12T01:08:01Z

The macro MIN_MEMORY_BLOCK_SIZE is currently defined twice in two .c files, and I need it in a third one to fix a powerpc bug, so let's first move it into a header Signed-off-by: Benjamin Herrenschmidt Acked-by: Ingo Molnar

PM: Reintroduce dropped call to check_wakeup_irqs

2011-07-11T08:51:49Z

Patch 2e711c04dbbf7a7732a3f7073b1fc285d12b369d (PM: Remove sysdev suspend, resume and shutdown operations) deleted sysdev_suspend(), which was being relied on to call check_wakeup_irqs() in suspend. If check_wakeup_irqs() is not called, wake interrupts that are pending when suspend is entered may be lost. It also breaks IRQCHIP_MASK_ON_SUSPEND, which is handled in check_wakeup_irqs(). This patch adds a call to check_wakeup_irqs() in syscore_suspend(), similar to what was deleted in sysdev_suspend(). Signed-off-by: Colin Cross Signed-off-by: Rafael J. Wysocki

Merge branch 'driver-core-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6

2011-06-28T18:15:36Z

* 'driver-core-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: Connector: Correctly set the error code in case of success when dispatching receive callbacks Connector: Set the CN_NETLINK_USERS correctly pti: PTI semantics fix in pti_tty_cleanup. pti: ENXIO error case memory leak PTI fix. pti: double-free security PTI fix drivers:misc: ti-st: fix skipping of change remote baud drivers/base/platform.c: don't mark platform_device_register_resndata() as __init_or_module st_kim: Handle case of no device found for ID 0 firmware: fix GOOGLE_SMI kconfig dependency warning

PM / Runtime: Handle clocks correctly if CONFIG_PM_RUNTIME is unset

2011-06-21T21:24:33Z

Commit 85eb8c8d0b0900c073b0e6f89979ac9c439ade1a (PM / Runtime: Generic clock manipulation rountines for runtime PM (v6)) converted the shmobile platform to using generic code for runtime PM clock management, but it changed the behavior for CONFIG_PM_RUNTIME unset incorrectly. Specifically, for CONFIG_PM_RUNTIME unset pm_runtime_clk_notify() should enable clocks for action equal to BUS_NOTIFY_BIND_DRIVER and it should disable them for action equal to BUS_NOTIFY_UNBOUND_DRIVER (instead of BUS_NOTIFY_ADD_DEVICE and BUS_NOTIFY_DEL_DEVICE, respectively). Make this function behave as appropriate. Signed-off-by: Rafael J. Wysocki Acked-by: Magnus Damm

PM: Fix async resume following suspend failure

2011-06-21T21:20:20Z

The PM core doesn't handle suspend failures correctly when it comes to asynchronously suspended devices. These devices are moved onto the dpm_suspended_list as soon as the corresponding async thread is started up, and they remain on the list even if they fail to suspend or the sleep transition is cancelled before they get suspended. As a result, when the PM core unwinds the transition, it tries to resume the devices even though they were never suspended. This patch (as1474) fixes the problem by adding a new "is_suspended" flag to dev_pm_info. Devices are resumed only if the flag is set. [rjw: * Moved the dev->power.is_suspended check into device_resume(), because we need to complete dev->power.completion and clear dev->power.is_prepared too for devices whose dev->power.is_suspended flags are unset. * Fixed __device_suspend() to avoid setting dev->power.is_suspended if async_error is different from zero.] Signed-off-by: Alan Stern Signed-off-by: Rafael J. Wysocki Cc: stable@kernel.org

PM: Rename dev_pm_info.in_suspend to is_prepared

2011-06-21T21:19:50Z

This patch (as1473) renames the "in_suspend" field in struct dev_pm_info to "is_prepared", in preparation for an upcoming change. The new name is more descriptive of what the field really means. Signed-off-by: Alan Stern Signed-off-by: Rafael J. Wysocki Cc: stable@kernel.org

PM / Runtime: Fix loops in pm_runtime_clk_notify()

2011-06-07T21:34:58Z

The loops over connection ID strings in pm_runtime_clk_notify() should actually iterate over the strings and not over the elements of the first of them, so make them behave as appropriate. This fixes a regression introduced by commit 600b776eb39a13a28b090 (OMAP1 / PM: Use generic clock manipulation routines for runtime PM). Reported-and-tested-by: Janusz Krzysztofik Signed-off-by: Rafael J. Wysocki

drivers/base/platform.c: don't mark platform_device_register_resndata() as __init_or_module

2011-06-07T17:01:17Z

This reverts 737a3bb9416ce2a7c7a4 ("Driver core: move platform device creation helpers to .init.text (if MODULE=n)"). That patch assumed that platform_device_register_resndata() is only ever called from __init code but that isn't true in the case ioctl->drm_ioctl->radeon_cp_init(). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=35192 Cc: Uwe Kleine-König Reported-by: Anthony Basile Cc: Greg KH Cc: David Airlie Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman